SKUT 85/16 V2 Absolute Maximum Ratings Symbol Conditions Values Unit Ts = 25 °C 94 A Ts = 85 °C 50 A Tj = 25 °C 1150 A Tj = 130 °C 1050 A Tj = 25 °C 6613 A²s Tj = 130 °C 5000 A²s VRSM 1700 V VRRM 1600 V Chip IT(AV) ITSM i2t SEMIPONT® 5 Three phase antiparallel thyristor module sinus 180° 10 ms 10 ms VDRM (di/dt)cr Tj = 130 °C (dv/dt)cr Tj = 130 °C Tj SKUT 85/16 V2 • Compact design • Two screws mounting • Heat ransfer and isolation through direct copper board (Low Rth) • Low resistance in steady-state and high reliability • High surge currents • Glass passivated thyrsitor chips • UL recognized, file no. E 63 532 Typical Applications* • Soft starter • Light control (e.g. studios, theaters) • Temperature control (e.g. oven, chemical processes) Remarks • IRMS=85A , for W3C application, sin.180° and TS=85°C V 50 A/µs 500 V/µs -40 ... 125 °C Module Tstg Visol Features 1600 ac; 50Hz; r.m.s -40 ... 125 °C 1 min 3000 V 1s 3600 V Characteristics Symbol Conditions min. typ. max. Unit V Chip VT Tj = 25 °C, IT = 120 A 1.8 VT(TO) Tj = 130 °C 1.1 V rT Tj = 130 °C 6.00 m IDD;IRD Tj = 130 °C, VRD=VRRM 20 mA tgd Tj = 25 °C, IG = 1 A, diG/dt = 1 A/µs 1 µs tgr VD = 0.67 * VDRM 2 µs tq Tj = 130 °C IH Tj = 25 °C IL Tj = 25 °C, RG = 33 VGT Tj = 25 °C, d.c. 3 V IGT Tj = 25 °C, d.c. 150 mA VGD Tj = 130 °C, d.c. IGD Tj = 115 °C, d.c. Rth(j-s) Rth(j-s) Rth(j-s) Rth(j-s) Rth(j-s) Rth(j-s) continuous DC sin. 180° rec. 120° 150 µs 200 mA 400 mA 0.25 6 V mA per thyristor K/W per module K/W per thyristor K/W per module 0.43 K/W per thyristor K/W per module K/W Module K/W Rth(c-s) K/W Ms to heatsink 2.25 2.5 Mt Nm Nm a m/s² w 75 g UT © by SEMIKRON Rev. 0 – 05.04.2013 1 SKUT 85/16 V2 Fig. 2: Power dissipation per thyristor vs r.m.s. current Fig. 6: Transient thermal impedance Zth(j-s) Fig. 8: On state characteristics Fig. 9: Surge overload current vs. time Fig. 10: Gate trigger characteristic 2 Rev. 0 – 05.04.2013 © by SEMIKRON SKUT 85/16 V2 UT SEMIPONT 5 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 0 – 05.04.2013 3