EL1537A To request the full datasheet, please visit www.intersil.com/products/EL1537A OBSOLETE PRODUCT T EMEN PLAC Data Sheet April 19, 2007 FN6134.1 NO RECOMMENDED RE at r nte Ce ort pp Su l ica hn Tec r ou contact ntersil.com/tsc 1-888-INTERSIL or www.i Dual Channel Central Office ADSL2+ Line Driver The EL1537A is a very low power dual channel differentiated amplifier designed for central office line driving for DMT ADSL solutions. The EL1537A has a higher output swing specification for driving 30 loads as compared to the EL1537. This device features a high drive capability of 400mA while consuming only 7.5mA of supply current per amplifier from ±12V supplies. This driver achieves a typical distortion of less than -75dBc, at 1MHz into a 50 load. The EL1537A is available in the thermally-enhanced 28 Ld HTSSOP package. This device is specified for operation over the full -40°C to +85°C temperature range. The EL1537A has two control pins, C0 and C1, per channel. With the selection of C0 and C1, the device can be set into full-IS power, 3/4-IS power, 1/2-IS power, and power-down disable modes. The EL1537A maintains excellent distortion and load driving capabilities even in the lowest power settings. The EL1537A has extended bandwidth and improved THD and slew rate for ADSL2+ and VDSL applications. PART MARKING • Drives 400mA at 16VP-P on ±12V supplies • 44.4VP-P differential output drive into 100 • 40VP-P minimum differential output drive into 60 • -75dBc typical driver output distortion driving 50 at 1MHz and 1/2-IS bias current • Low quiescent current of 3.9mA per amplifier in 1/2-IS mode • 50MHz BW at AV = 10 • Power-down disable mode • Pin-to-pin replacement for EL1527 • Pb-free plus anneal available (RoHS compliant) Applications • ADSL, ADSL2, ADSL2+ line drivers • G.SHDSL, HDSL2 line drivers • VDSL line drivers • Video distribution amplifiers Ordering Information PART NUMBER (Note) Features • Video twisted-pair line drivers PACKAGE (Pb-free) TAPE & REEL PKG. DWG. # EL1537AIREZ 1537AIREZ 28 Ld HTSSOP - MDP0048 EL1537AIREZ-T7 1537AIREZ 28 Ld HTSSOP 7” MDP0048 EL1537AIREZ-T13 1537AIREZ 28 Ld HTSSOP 13” MDP0048 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Pinout EL1537A (28 LD HTSSOP) TOP VIEW VS-(1) 1 C0(1) 2 27 NC C1(1) 3 26 NC INB+(1) 4 25 INA+(1) INB-(1) 5 24 INA-(1) OUTB(1) 6 VS+(2) 7 NC 8 OUTA(2) 9 23 OUTA 22 NC 21 VS+(1) 20 OUTB(2) INA-(2) 10 19 INB-(2) INA+(2) 11 18 INB+(2) NC 12 17 C1(2) NC 13 16 C0(2) GND(2) 14 1 28 GND(1) 15 VS-(2) CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a trademark of Intersil Americas LLC. Copyright © Intersil Americas LLC. 2005, 2007. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. EL1537A All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 FN6134.1 April 19, 2007