P6171 17” SXGA TFT Monitor User’s Manual Disclaimers This manual has been carefully checked and believed to contain accurate information. Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third party’s rights, and any liability arising from such use. Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd. CAUTION If you replace wrong batteries, it causes the danger of explosion. It is recommended by the manufacturer that you follow the manufacturer’s instructions to only replace the same or equivalent type of battery, and dispose of used ones. Copyright 2014 Axiomtek Co., Ltd. All Rights Reserved July 2014, Version A1 Printed in Taiwan ii Safety Precautions Before getting started, read the following important cautions. 1. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices. Most electronic components are sensitive to static electrical charge. 2. Disconnect the power cords from the P6171 Series before making any installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the P6171 Series is properly grounded. 3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only a trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling boards and components, wear a wrist-grounding strap, available from most electronic component stores. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. ® ® Intel and Pentium are trademarks of Intel Corporation. AMI is trademark of American Megatrend Inc. Other brand names and trademarks are the properties and registered brands of their respective owners. iii Table of Contents Disclaimers ..................................................................................................... ii Safety Precautions ........................................................................................ iii Chapter 1 Introduction ............................................. 1 1.1 General Description ............................................................................ 1 1.2 Features ............................................................................................... 2 1.3 Specifications ...................................................................................... 2 1.4 Dimensions and Outlines ................................................................... 3 1.5 I/O Outlets ............................................................................................ 4 1.6 Packing List ......................................................................................... 5 Chapter 2 System Setup .......................................... 7 2.1 System Configuration ......................................................................... 7 2.2 Panel Mounting ................................................................................... 8 2.3 Wall Mounting ...................................................................................... 8 2.4 VESA Mounting ................................................................................... 9 2.5 Rack Mounting .................................................................................. 10 Appendix A Supported Input Timing Modes ............. 11 Appendix B OSD Operation........................................ 13 Function Description of OSD Menu ............................................................ 13 iv P6171 User’s Manual Chapter 1 Introduction This chapter contains general information and detailed specifications of the P6171. Chapter 1 includes the following sections: General Description Features Specifications Dimensions and Outlines I/O Outlets Package List 1.1 General Description The P6171, a industrial 17 inches view area LCD Monitor comes with slim, light and reliable features to replace traditional bulky CRT for Industrial application. Its unique flat design is fit for panel mounting, VESA mounting, Wall mounting and Rack mounting. The display interface offers DVI-D, HDMI and DisplayPort digital interfaces for different input source from PC system or multimedia system that let you upgrade the display don’t change anything from your system. Besides, for varied HMI field, you can choose one of resistive touch or glass interface to meet your application. In addition, this monitor has more comfort, safety, and environmental protection for humanized & health consideration those would be the benefit that users can get. This LCD monitor builds in color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance. A maximum resolution of 1280x1024 is ideal for displaying complex graphics and high definition images. Other outstanding designs that enhance this LCD monitor’s performance are Plug & Play compatibility, and OSD (On Screen Display) controls, especially OSD, it made you ease adjustment on screen image. Introduction 1 P6187W/P6157W User’s Manual 1.2 Features High contrast color 17” SXGA TFT LCD display support resolution up to 1280x1024 Flat design with NEMA4/IP65-compliant Suits with resistive touch or glass High Brightness and Ultra-wide viewing angle with anti-glare features. Power management system conforms to VESA DPMS standard Advanced OSD control for picture quality adjustment Supports VESA ARMs, Desktop Stand Rear, Panel, Wall and Rack mounting 1.3 Specifications 17” SXGA(1280x1024) LCD with LED backlight Resistive Touch or glass Front bezel design with NEMA4/IP65 Control: OSD (On Screen Display) control pad on the side Mounting: Support Panel mount, VESA arm mount, Wall mount and Rack mount (optional) Net Weight P6171: 3.8KGS Dimension (Main Body Size) P6171: 410X338X28 mm Operation Temperature 0℃ to 50℃ Relative Humidity 20% to 90% @ 40℃, Non-Condensing Power input Screw-type external AC or 12V/24VDC-in Max power consumption: 26W NOTE: All specifications and images are subject to change without notice. 2 Introduction P6171 User’s Manual 1.4 Dimensions and Outlines The following diagrams show the dimensions and outlines of P6171 Introduction 3 P6187W/P6157W User’s Manual 1.5 I/O Outlets Please refer to the following illustration for I/O locations of the P6171. 1 2 3 4 5 6 4 No Function No Function 1 Menu (Enter function) 7 2 SEL+ 8 DisplayPort 3 SEL- 9 HDMI 4 Exit/Auto Adjust 10 DVI-D 5 Power LED 11 RS-232 or USB for Touch 6 Power Switch Screw type or Phoenix type power input Introduction P6171 User’s Manual 1.6 Packing List When you receive the P6171, the bundled package should contain the following items: P6171 unit x 1 DVI cable x1 USB cable or RS-232 cable x1 (for resisitve touch version only ) Adaptor x1 (for AC version only) Panel mount kit x 14 If you can not find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction 5 P6187W/P6157W User’s Manual This page is intentionally left blank. 6 Introduction P6171 User’s Manual Chapter 2 System Setup This chapter details the system parts and components with figures. Sections include: System Configuration Panel Mounting Wall Mounting VESA Mounting Rack Mounting 2.1 System Configuration The figure below shows the side views of P6171 series. 1 2 3 4 5 6 1. Menu: Press this button to turn on/off the OSD (On Screen Display) main menu. Press this button to activate selected items. 2. SEL+: To scroll up the menu. To increase the value of selected item. 3. SEL-: To scroll down the menu. To decrease the value of selected item. 4. Exit: Jump out the selection icon . Auto adjust. 5. Power LED: When the light is green, the power is on, red light when stand by. 6. Power switch: Press this button to turn on/off the monitor. System Setup 7 P6171 User’s Manual 2.2 Panel Mounting The P6171 is designed for panel mount application. To mount the P6171, the standard set of mounting kit (included in the system packaging) is needed. ▲P6171 Panel Mount kits 2.3 Wall Mounting The P6171 provides VESA mount and wall mount. Screw four screws to fix the kit in the back chassis. 8 System Setup P6171 User’s Manual 2.4 VESA Mounting The P6171 provides VESA mount at the back of system. Screw four screws to fix the kit in the back chassis. 100mm 100mm System Setup 9 P6171 User’s Manual 2.5 Rack Mounting The P6171 provides rack mount at the back of system. Screw eight screws to fix the kit in the back chassis. 10 System Setup P6171 User’s Manual Appendix A Supported Input Timing Modes Supported Input Timing Modes Horizontal Timing Pixel SPEC MODE Vertical Timing Freq. Sync Freq. Total Active Sync Freq. Total Active MHZ Polar KHz Pixel Pixel Polar Hz Line Line P 31.430 800 640 N 70.000 449 350 N 31.469 800 640 N 59.940 525 480 N 31.469 800 640 N 59.940 525 480 N 37.861 832 640 N 72.809 520 480 N 37.500 840 640 N 75.000 500 480 N 31.430 900 720 P 70.000 449 400 P 35.156 1024 800 P 56.250 625 600 P 37.879 1056 800 P 60.317 628 600 P 48.077 1040 800 P 72.188 666 600 P 46.875 1056 800 P 75.000 625 600 640×350 24.144 @70Hz VESA 640×480 25.175 @60Hz VESA 640×480 25.175 @60Hz VESA 640×480 31.500 @72Hz VESA 640×480 31.500 @75Hz VESA 720×400 28.287 @70Hz VESA 800×600 36.000 @56Hz VESA 800×600 40.000 @60Hz 0 VESA 800×600 50.000 @72Hz VESA 800×600 49.500 @75Hz VESA Supported Input Timing Modes 11 P6171 User’s Manual Horizontal Timing Pixel SPEC MODE Freq. MHZ 1024×768 65.000 @60Hz VESA 1024×768 64.000 @60Hz VESA 1024×768 75.000 @70Hz VESA 1024×768 80.000 @75Hz VESA 1024×768 78.750 @75Hz VESA 1280×1024 108.000 @60Hz VESA 1280×1024 135.000 @75Hz VESA Vertical Timing Sync Freq. Total Active Sync Freq. Total Active Polar KHz Pixel Pixel Polar Hz Line Line N 48.363 1344 1024 N 60.005 806 768 N 48.780 1312 1024 N 60.001 813 768 N 56.476 1328 1024 N 70.070 806 768 N 60.241 1328 1024 N 74.927 804 768 P 60.023 1312 1024 P 75.030 800 768 P 63.981 1688 1280 P 60.020 1066 1024 P 79.976 1688 1280 P 75.025 1066 1024 NOTE:Timing depends on LCD Panel’s requirement. 12 Supported Input Timing Modes P6171 User’s Manual Appendix B OSD Operation Function Description of OSD Menu ※The layout and format of OSD depends on customer’s request. OSD MENU Description Luminance： Brightness Contrast Sharpness Luminance Color: Color Temperature (9300,7500,6500,user) Red Green Blue. Color OSD Settings： Horizontal Vertical Transparency OSD Time out . OSD Setup: Setup Language Volume Mute Input Reset This page is intentionally left blank. OSD Operation 13