Datasheet (PDF)

EL9000 Series
Hardened 1000BASE-T to 1000BASE-SX/LX/BX Media Converter
ISA.12.12.01
NEMA
TS2
Overview
The EL9000 Series provides media conversion between 1000BASE-T(X) and 1000BASE-SX-LX Fiber. Built specifically for missioncritical applications in harsh environments, the EL9000’s hardened design features high shock & vibration resistance, electrical
noise immunity, wide operating temperature range from -40°C to 75°C, and ruggedized aluminum housing. With triple power
inputs, link down alarming, Link-Fault-Pass-Through and a wide range of fiber connectivity options, the EL9000 is the ideal media
converter for environments where connectivity is crucial.
Spotlight
•Gigabit Connectivity
◦◦ 1000BASE-TX and 1000BASE-SX/LX/BX Ethernet transmission conversion
◦◦ 1000Mbps Full duplex and full wire-speed forwarding rate
•ISA12.12.01 Certification
◦◦ Highly qualified for explosive environmental applications and certified by UL with ISA12.12.01 Class I, Division 2 classified for use
in hazardous locations
•Wide Operating Temperature
◦◦ -40°C to 75°C wide operating temperature range design is suitable for installation in outdoor cabinet
EL9000 Series
1
www.EtherWAN.com
rev. A1.1
Hardware Specifications
Technology
Environment
Standards
Operating Temperature
•-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
•IEEE802.3ab 1000BASE-T
•IEEE802.3z 1000BASE-SX/1000BASE-LX
•IEEE802.3x full duplex and flow control
Storage Temperature
•-40°C to 85°C (-40°F to 185°F)
Forward and Filtering Rate
•1,488,100pps for 1000Mbps
Ambient Relative Humidity
•5% to 95% (non-condensing)
Processing Type
•Auto Negotiation
•Half duplex back-pressure and IEEE802.3x full-duplex flow
control
•Auto-MDI/MDIX
Regulatory Approvals
ISO
•Manufactured in an ISO9001 facility
Power
EMI
FCC Part 15B, Class A
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3
Safety
ISA 12.12.01 (UL1604) for Hazardous Locations
Input Voltage
•12 to 48VDC (Terminal Block)
•12VDC (DC Jack)
Power Consumption
•9.12W Max, 0.76A @ 12VDC, 0.38A@ 24VDC,
0.19A @ 48VDC
Protection
•Overload current protection
•Reverse polarity protection
•Class 1, Division 2 group A,B,C&D
Mechanical
UL60950-1
Casing
EMS
EN61000-6-2
•Aluminum Case
•IP30
•EN61000-4-2 (ESD Standards)
•EN61000-4-3 (Radiated RFI Standards)
•EN61000-4-4 (Burst Standards)
•EN61000-4-5 (Surge Standards)
•EN61000-4-6 (Induced RFI Standards)
•EN61000-4-8 (Magnetic Field Standards)
Dimensions
•50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight
•0.8Kg (1.76lbs.)
Installation
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
IEC60068-2-27 Ea (Shock)
FED STD 101C Method 5007.1 (Free fall w/ package)
Industrial Compliance
NEMA TS2
•DIN-Rail (Top hat type 35mm), Panel, or Rack mounting
Interface
Ethernet Port
•1000BASE-T: 1 port
•1000BASE-SX/LX: 1 port
LED Indicators
•Per Unit: Power, Power2, Fault
•Per Port: LNK, TX, RX
DIP Switch
•No.1: LFPT on/off
•No.2: Alarm for copper port on/off
•No.3: Alarm for fiber port on/off
•No.4: Auto-negotiation for fiber port on/off
Alarm Contact
•Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
EL9000 Series
2
www.EtherWAN.com
rev. A1.1
Application Diagram
Two EL9000 units deployed in a building-to-building application
Telecommunication Room A
Telecommunication Room B
Gigabit Switch
Gigabit Switch
Cat.5
Fiberoptic
Ethernet
Max. distance up to 120km
1000BASE-SX/LX/BX fiber
EL9000 Series
EL9000 Series
Dimensions
DC
JACK
DCJACK
TERMINAL
BLOCK
TERMINALBLOCK
PWR1
GND
PWR2
GND
FAULT
DC12V
FAULT
Top
50mm
(1.97”)
Side
Back
135mm (5.31”)
Top
Front
110mm (4.33”)
Bottom
EL9000 Series
3
www.EtherWAN.com
rev. A1.1
Ordering Information
Model
EL9000-A-Y-1-P
1000BASE-T to 1000BASE-SX/LX Hardened Media Converter
Gigabit Fiber Options (Y)
B
1000BASE-SX (SC) - 550m (850nm)
C
1000BASE-SX (SC) - 2Km (1310nm)
N
1000BASE-LX (SC) - 10Km (1310nm)
O
1000BASE-LX (SC) - 20Km (1310nm)
R
1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 20Km
S
1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 20Km
* More Gigabit options are also available upon request
Power Connector Options (P)
A
Terminal Block
B
DC Jack
Optional Accessories
KP-AA96-480
Panel mount kit
DR-30-24
30W/1.5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
DR-60-24
60W/2.5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
DR-75-24
75W/3.2A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
DR-120-24
120W/5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
41-136046-X
36W/3A 12VDC hardened power adapter with open wire in aluminum housing (For Terminal Block);
(X) = 1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA
41-136044-X
36W/3A 12VDC hardened power adapter with latched DC jack in aluminum housing (For DC Jack);
(X) = 1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA
EL9000 Series
4
www.EtherWAN.com
rev. A1.1
Similar pages