Data Sheet

BAP64-02
Silicon PIN diode
Rev. 10 — 12 May 2015
Product data sheet
1. Product profile
1.1 General description
Planar PIN diode in a SOD523 ultra small plastic SMD package.
1.2 Features and benefits







High voltage, current controlled
RF resistor for RF attenuators and switches
Low diode capacitance
Low diode forward resistance
Very low series inductance
For applications up to 6 GHz
AEC-Q101 qualified
1.3 Applications
 RF attenuators and switches
2. Pinning information
Table 1.
Pin
Discrete pinning
Description
1
cathode
2
anode
Simplified outline
[1]
Symbol
[1]
V\P
The marking bar indicates the cathode.
3. Ordering information
Table 2.
Ordering information
Type number Package
BAP64-02
Name
Description
Version
-
plastic surface-mounted package; 2 leads
SOD523
BAP64-02
NXP Semiconductors
Silicon PIN diode
4. Marking
Table 3.
Marking
Type number
Marking code
BAP64-02
S
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Min
Max
Unit
VR
reverse voltage
Conditions
-
175
V
IF
forward current
-
100
mA
Ptot
total power dissipation
-
715
mW
Tstg
storage temperature
65
+150
C
Tj
junction temperature
65
+150
C
Typ
Unit
85
K/W
Tsp = 90 C
6. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Rth(j-sp)
thermal resistance from junction
to solder point
7. Characteristics
Table 6.
Characteristics
Tj = 25 C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VF
forward voltage
IF = 50 mA
-
0.95
1.1
V
IR
reverse current
VR = 175 V
-
-
10
A
VR = 20 V
-
-
1
A
VR = 0 V
-
0.48
-
pF
VR = 1 V
-
0.35
-
pF
VR = 20 V
-
0.23
0.35
pF
Cd
diode capacitance
BAP64-02
Product data sheet
see Figure 1; f = 1 MHz;
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
2 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
Table 6.
Characteristics …continued
Tj = 25 C unless otherwise specified.
Symbol
rD
Parameter
diode forward resistance
L
charge carrier life time
LS
series inductance
[1]
Conditions
Min
Typ
Max
Unit
IF = 0.5 mA
-
20
40

IF = 1 mA
-
10
20

IF = 10 mA
-
2.0
3.8

IF = 100 mA
-
0.7
1.35

-
1.55
-
s
-
0.6
-
nH
see Figure 2; f = 100 MHz;
when switched from IF = 10 mA to
IR = 6 mA; RL = 100 ; measured at
IR = 3 mA
[1]
Guaranteed on AQL basis: inspection level S4, AQL 1.0.
BAP64-02
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
3 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
PJO
&G
I)
PJO
U'
959
f = 1 MHz; Tj = 25 C.
Fig 1.
,)P$
f = 100 MHz; Tj = 25 C.
Diode capacitance as a function of reverse
voltage; typical values
Fig 2.
DDD
Forward resistance as a function of forward
current; typical values
DDD
/LQV
G%
,6/
G%
I*+]
Tamb = 25 C
I*+]
Tamb = 25 C
Diode zero biased and inserted in series with a 50 
stripline circuit
(1) IF = 100 mA
(2) IF = 10 mA
(3) IF = 1 mA
(4) IF = 0.5 mA
Diode inserted in series with a 50  stripline circuit and
biased via the analyzer Tee network
Fig 3.
Isolation of the diode as a function of
frequency; typical values
BAP64-02
Product data sheet
Fig 4.
Insertion loss of the diode as a function of
frequency; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
4 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
8. Package outline
3ODVWLFVXUIDFHPRXQWHGSDFNDJHOHDGV
62'
$
F
Y 0 $
+(
$
'
(
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
ES
81,7
$
ES
F
'
(
+(
Y
PP
1RWH
7KHPDUNLQJEDULQGLFDWHVWKHFDWKRGH
287/,1(
9(56,21
5()(5(1&(6
,(&
62'
Fig 5.
-('(&
-(,7$
6&
(8523($1
352-(&7,21
,668('$7(
Package outline SOD523
9. Abbreviations
Table 7.
BAP64-02
Product data sheet
Abbreviations
Acronym
Description
AQL
Acceptable Quality Level
PIN
P-type, Intrinsic, N-type
SMD
Surface Mounted Device
S4
Special inspection level 4
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
5 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
10. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAP64-02 v.10
20150512
Product data sheet
-
BAP64-02 v.9
Modifications:
•
AEC-Q101 qualified
BAP64-02 v.9
20141215
Product data sheet
-
BAP64-02 v.8
BAP64-02 v.8
20140428
Product data sheet
-
BAP64-02 v.7
BAP64-02 v.7
20140211
Product data sheet
-
BAP64-02_N v.6
BAP64-02_N v.6
20080109
Product data sheet
-
BAP64-02 v.5
BAP64-02 v.5
(9397 750 06912)
20000323
Product specification
-
BAP64-02 v.4
BAP64-02 v.4
(9397 750 06418)
19990921
Preliminary specification
-
BAP64-02_N v.3
BAP64-02_N v.3
(9397 750 06086)
19990616
Preliminary specification
-
BAP64-02 v.2
BAP64-02 v.2
(9397 750 05556)
19990510
Objective specification
-
BAP64-02_N v.1
BAP64-02_N v.1
(9397 750 05492)
19981204
Objective specification
-
-
BAP64-02
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
6 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
11. Legal information
11.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
11.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
BAP64-02
Product data sheet
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
7 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
11.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BAP64-02
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 12 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
8 of 9
BAP64-02
NXP Semiconductors
Silicon PIN diode
13. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . .
General description . . . . . . . . . . . . . . . . . . . . .
Features and benefits . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pinning information . . . . . . . . . . . . . . . . . . . . . .
Ordering information . . . . . . . . . . . . . . . . . . . . .
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal characteristics . . . . . . . . . . . . . . . . . .
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . .
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .
Legal information. . . . . . . . . . . . . . . . . . . . . . . .
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information. . . . . . . . . . . . . . . . . . . . . .
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
2
2
2
2
5
5
6
7
7
7
7
8
8
9
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP Semiconductors N.V. 2015.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 12 May 2015
Document identifier: BAP64-02