Silicon Avalanche Diodes 5000 Watt Axial Leaded Transient Voltage Suppressor RoHS 5KP Series ® The 5KP Series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and othertransient voltage events. These devices are ideal for the protection of I/O interfaces, Vcc bus and other vulnerable circuits used in automotive, industrial and consumer electronic applications. FEATURES • RoHS Compliant • 5.0 to 220 Volts • Glass passivated chip junction • Uni-directional and Bi-directional • 5000W Peak Pulse Power capability on 10/1000µs waveform • Excellent clamping capability • Repetition rate (duty cycle): 0.05% MAXIMUM RATINGS AND CHARACTERISTICS @25˚C AMBIENT TEMPERATURE (unless otherwise noted) • Low incremental surge resistance • Fast response time: typically less than 1.0ps • Typical IR less than 1µA for VBR>=10V • High temperature soldering guaranteed: 265˚C/10 seconds/.375"(9.5mm) lead length, 5lbs., (2.3kg) tension Agency Approvals: Recognized under the Components Program of Underwriters Laboratories. Agency File Number: E128662 SYMBOL RATING from 0 Volts to BV VALUE Min 5000 Watts UNIT Peak Pulse Power Dissipation on 10/1000µs waveform(Note 1, FIG. 1) PPPM Peak Pulse Current of on 10/1000µs waveform (Note 1, FIG. 3) IPPM SEE TABLE 1 Amps PM(AV) 8 Watts Steady State Power Dissipation at TL=75˚C, Lead lengths .375", (9.5mm)(Note 2) Peak Forward Surge Current, 8.3ms 400 Single Half Sine-Wave Superimposed IFSM on Rated Load, (JEDEC Method) (Note 3) Operating junction and Storage Tj, TSTG -55 to +175 Temperature Range Amps Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA= 25˚C per Fig.2 2. Mounted on Copper Pad area of 0.8x0.8"(20x20mm) per Fig.5. 3. 8.3 ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. ORDERING INFORMATION 5KP C A Voltage Bi-Directional 5% Voltage Tolerance Packaging Option B = Bulk (500 pcs) Mechanical Specifications: Weight: Case: Mounting Position: Polarity: Terminal: T = Tape and reeled (800 pcs) 298 w w w. l i t t e l f u s e . c o m 0.07 ounce, 2.1 gram Molded plastic over glass passivated junction Any Color band denotes positive end (cathode) except Bipolar Plated Axial leads, solderable per MIL-STD-750, Method 2026 °C Silicon Avalanche Diodes 5000 Watt Axial Leaded Transient Voltage Suppressor RoHS 5KP Series ® ELECTRICAL SPECIFICATION @ Tamb 25°C Uni-Polar 5KP5.0A 5KP6.0A 5KP6.5A 5KP7.0A 5KP7.5A 5KP8.0A 5KP8.5A 5KP9.0A 5KP10A 5KP11A 5KP12A 5KP13A 5KP14A 5KP15A 5KP16A 5KP17A 5KP18A 5KP20A 5KP22A 5KP24A 5KP26A 5KP28A 5KP30A 5KP33A 5KP36A 5KP40A 5KP43A 5KP45A 5KP48A 5KP51A 5KP54A 5KP58A 5KP60A 5KP64A 5KP70A 5KP75A 5KP78A 5KP85A 5KP90A 5KP100A 5KP110A 5KP120A 5KP130A 5KP150A 5KP160A 5KP170A 5KP180A 5KP190A 5KP200A 5KP210A 5KP220A Bi-Polar 5KP5.0CA 5KP6.0CA 5KP6.5CA 5KP7.0CA 5KP7.5CA 5KP8.0CA 5KP8.5CA 5KP9.0CA 5KP10CA 5KP11CA 5KP12CA 5KP13CA 5KP14CA 5KP15CA 5KP16CA 5KP17CA 5KP18CA 5KP20CA 5KP22CA 5KP24CA 5KP26CA 5KP28CA 5KP30CA 5KP33CA 5KP36CA 5KP40CA 5KP43CA 5KP45CA 5KP48CA 5KP51CA 5KP54CA 5KP58CA 5KP60CA 5KP64CA 5KP70CA 5KP75CA 5KP78CA 5KP85CA 5KP90CA 5KP100CA 5KP110CA 5KP120CA 5KP130CA 5KP150CA 5KP160CA 5KP170CA 5KP180CA 5KP190CA 5KP200CA 5KP210CA 5KP220CA Reverse Stand off Voltage VR (Volts) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 180.0 190.0 200.0 210.0 220.0 Breakdown Voltage VBR (Volts) @ IT MIN 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.00 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 110.00 122.00 133.00 144.00 167.00 178.00 189.00 200.00 211.00 222.00 233.00 244.00 Test Current IT (mA) Maximum Clamping Voltage VC @ IPP (Volts) 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 292.0 310.0 329.2 349.5 371.1 MAX 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 221.00 233.00 246.00 258.00 270.00 Maximum Peak Pulse Current IPP (A) 544.0 486.0 447.0 417.0 388.0 368.0 348.0 325.0 295.0 275.0 252.0 233.0 216.0 205.0 193.0 181.0 172.0 154.0 141.0 129.0 119.0 110.0 103.0 93.9 86.1 77.6 72.1 68.8 64.7 60.7 57.5 53.5 51.7 48.6 44.3 41.4 39.7 36.5 34.3 30.9 28.3 26.0 24.0 20.6 19.3 18.2 17.6 9.7 9.1 8.6 8.1 Maximum Reverse Leakage IR @ VR (µA) 5000 5000 2000 1000 250 150 50 20 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6 SILICON DIODE ARRAYS Part Numbers For bidirectional type having Vrwm of 30 volts and less, the IR limit is double. For parts without A , the VBR is + 10% w w w. l i t t e l f u s e . c o m 299 Silicon Avalanche Diodes 5000 Watt Axial Leaded Transient Voltage Suppressor RoHS 5KP Series ® Ratings and Characteristic Curves TA=25˚C unless otherwise noted 100 Non-repetitive pulse waveform shown in Fig.3 TA=25˚C Peak Pulse Power (KW) PPPM- Peak Pulse Power (kW) 100 10 1 0.1 0.1µs 1.0µs 100µs 10µs 1.0ms 75 50 25 0 10ms 0 td- Pulse Width (sec.) tr=10µsec TJ=25˚C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 CJ-Junction Capacitance (pF) IPPM- Peak Pulse Current, % I RSM 100 125 150 175 200 Fig. 2 Pulse Derating Curve 10000 Half Value IPPM 2 50 10/1000µsec. Waveform as defined by R.E.A td 2.0 3.0 Measured at Stand-off Voltage 1000 100 1.0 0 TJ=25˚C f=1MH2 Vsig=50mVp-p 4.0 1 t-Time (ms) 60HZ Resistive or Inductive Load 6 L=0.375(9.5mm) Lead Lengths 4 2 0.8x0.8x.040'' (20x20mm) Copper Heat Sinks 0 25 50 75 100 125 150 175 200 TL- Lead Temperature (˚C) Fig. 5 Steady State Power Derating Curve 300 100 200 Fig. 4- Typical Junction Capacitance IFSM, Peak Forward Surge Current (A) 8 10 Vbr, Breakdown Voltage Fig. 3 Pulse Waveform Steady State Power Dissipation (W) 75 100000 150 0 50 TA- Ambient Temperature (˚C) Fig. 1 Peak Pulse Power Rating Curve 0 25 400 8.3ms Single Half Sine-Wave 350 300 250 200 150 100 1 10 100 Number of Cycles at 60HZ Fig. 6- Maximum Non-repetitive Forward Surge Current w w w. l i t t e l f u s e . c o m Silicon Avalanche Diodes 5000 Watt Axial Leaded Transient Voltage Suppressor RoHS 5KP Series ® Package Outline Dimensions Case Style P600 1.0 (25.4) MIN. 6 SILICON DIODE ARRAYS 0.360 (9.1) 0.340 (8.6) DIA. 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) w w w. l i t t e l f u s e . c o m 301