Datasheet (PDF)

ED3331 Series
Industrial 10/100BASE-TX Ethernet Extender over
Coaxial Cable
UL508
Overview
The ED3331 Series Ethernet Extender enables the extension of Ethernet connectivity over existing coaxial cable allowing legacy
infrastructure to be leveraged for IP networks and extending the Ethernet distance limitations of 100-meters.
Upgrading an existing legacy control or surveillance system to a new IP-based system is a complicated task, especially when existing
cable infrastructure is old coaxial cable. EtherWAN’s ED3331 Series provides Ethernet connection and extension over these existing
copper wire cables minimizing the expense of pulling new cable infrastructure.
The ED3331 Series is built with industrial grade specifications, providing wide temperature operation range from -10°C to 60°C
to overcome industrial environments. Incorporating VDSL technology, the ED3331’s BNC extender ports provide long distance
transmission with 75Mbps rate at 200 meters, or 1Mbps at 2600 meters; 5 speed LED Indicators in the front panel provide easy
lookup for the connection speed.
Spotlight
•UL508 Certification
◦◦ Specific design for industrial communication applications with UL508 safety certification
•Transmission Speed LED Indication
◦◦ Supports ten speed LED Indicators
•Industrial Operating Temperature Range
◦◦ From -10°C to 60°C, wide operating temperature is suitable for outdoor cabinet installation
•Optional Chassis System
◦◦ Supports wall mounting or EtherWAN's EMC1600 chassis system for easy group installation with power redundancy
ED3331
1
www.EtherWAN.com
rev. A3
Hardware Specifications
Technology
Speed / Distance Reference
Speed
Standards
•IEEE802.3 10BASE-T
•IEEE802.3u 100BASE-TX
•IEEE802.3x full duplex and flow control
Processing Type
•Half-duplex back-pressure and IEEE802.3x Full-duplex flow
control
•Auto Negotiation
•Auto-MDI/MDIX
Power
Input Voltage
•12VDC
Power Consumption
•5.76W Max. 0.48A @ 12VDC
2,600M(8,530ft.)
6-10Mbps
2,400M(7,874ft.)
11-16Mbps
2,000M(6,561ft.)
17-20Mbps
1,800M(5,905ft.)
21-29Mbps
1,600M(5,249ft.)
30-43Mbps
1,400M(4,593ft.)
44-54Mbps
1,200M(3,937ft.)
55-63Mbps
1,000M(3,280ft.)
64-74Mbps
600M(1,968ft.)
75-85Mbps
200M(656ft.)
•Note: All speed selections are Symmetrical on the DSL
and Full-duplex on the Ethernet
Protection
•Over current protection
•Reverse polarity protection
Environment
Mechanical
Operating Temperature
•-10°C to 60°C (14°F to 140°F)
Casing
Storage Temperature
•Aluminum case
•-20°C to 70°C (-4°F to 158°F)
Dimensions
Ambient Relative Humidity
•80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.30" (D) x 0.94" (H)
•5% to 95% (non-condensing)
Regulatory Approvals
Weight
•150g (0.33lb.)
ISO
Installation
•Manufactured in an ISO9001 facility
•DIN-Rail (Top hat type 35mm) mounting
•Wall mounting
•Install with EMC1600 Chassis
Safety
UL508
EMI
FCC Part 15B, Class A
VCCI, Class A
EN61000-6-3
EN55022
EN61000-3-3
EMS
EN61000-6-2
Interface
Ethernet Port
•Port: One RJ-45 port
•Speed: 10/100Mbps
•Distance: 100meters (328ft.)
•Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire)
100BASE-TX: UTP CAT. 5 (4-pair wire)
Ethernet Extender Port
•One 75Ω BNC Port (with F-type connector)
•Speed: 1/5/10/20/30/40/50/60/70/75Mbps
•Distance: 2600 meters (8,530ft.)
•Cable: Coaxial Cable (5C2V/ RG6(=RG6/U))
•EN61000-4-2 (ESD Standards)
•EN61000-4-3 (Radiated RFI Standards)
•EN61000-4-4 (Burst Standards)
•EN61000-4-5 (Surge Standards)
•EN61000-4-6 (Induced RFI Standards)
•EN61000-4-8 (Magnetic Field Standards)
DIP-Switch
•One DIP Switch: Local (CO) or Remote (CPE)
LED Indicators
•Per Unit: Power
•Per 10/100TX Port: Link/Activity, Full-duplex
•Line: Error, Link, Local, Remote
ED3331
Distance
1-5Mbps
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
IEC60068-2-27 Ea (Shock)
FED STD 101C Method 5007.1 (Free fall w/ package)
2
www.EtherWAN.com
rev. A3
Dimensions
109.2mm (4.3”)
Bottom
Side
23.8
Top
80.3mm (3.16”)
Front
Application Diagram
ED3331
RJ-45
EX1605PE
BNC
RJ-45
BNC
EX1605PE
Coaxial Cable
CAT 5 Cable (100m)(328ft.)
ED3331
3
www.EtherWAN.com
rev. A3
Ordering Information
Model
ED3331-00Z
Industrial 10/100BASE-TX Ethernet Extender over Coaxial Cable
External Power Adaptor Options (Z)
ED3331
A
with external power adapter for AU
E
with external power adapter for EU
J
with external power adapter for JP
K
with external power adapter for UK
U
with external power adapter for USA
3C
with external power adapter for China
4
www.EtherWAN.com
rev. A3
Similar pages