MINIA TURE FUSEHOLDERS INIATURE Holder / No. 601 Not for new designs - refer to No. 850 and 851 Panel Mount, Shocksafe 5x20mm Fuses SW 14 SEMKO: Certificate No. 9946019 UL Recognized: File No. E 70164 CSA Certified: File No. 47574 VDE Licence No. 132224 12,1 7,1 0,5 35,5 IEC 60127-6 UL 512 CSA C22.2. No.39 3,2 ∅15,5 5 6 Standard Approvals 0,5 5 Specifications 1,7 M12,7x1,5 12 -0,1 12,7 -0,1 5,8 12.7mm diameter D-hole Admissible torque on plastic hex nut is 1.2Nm Te r m i n a l s Solderable or 2.8mm quick connect-fits 0.5mm tab 3,2 1...6 Panel opening 2,8 Mounting 7,1 5 Cap / No. 602 Protection Class & Category IP 40 (with Cap 602 00 acc. to IEC 60529) IP 54 (with Cap 602 04 acc. to IEC 60529) PC2 (IEC 60127-6) Materials Holder: 20 12,5 10,85 Design 00: without silicon washer (IP 40) Design 04: with silicon washer (IP 54) (from front side only) Insulating cover for terminals/ No. 522 Black Duroplast Phenolplast PF, UL94 V-0 Cap: Black Thermoplastic Polyamide PA6.6, UL94 V-0 Sealing Washer: Novapress Multi (Cap 602 04) Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned Insulating cover: Polyvinyl chloride (Soft PVC), black Electrical Data (23ºC) Rated Voltage: 250V Rated Current: 6.3A (SEMKO/VDE) 16A (UL/CSA) Rated Power : 4W (SEMKO/VDE) Operating TTemperature emperature -25ºC to +70ºC (consider de-rating) Climatic TTest est -25ºC/+70ºC/21 days (IEC 60068-2-1...3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Dielectric Strength > 1.5 kV Impulse Voltage 4 kV, 50 Hz, 1 min., dry Insulation Resistance > 10 3 MΩ (500 VDC, 1 min.) Order Information Solderability Packaging 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) Bulk (100 pcs.) Order Numbers Holder No. 601 0000 000 Cap, without washer, IP 40 No. 602 0000 000 Cap, with washer, IP 64 No. 602 0000 040 Soldering Heat Resistance 260ºC, 5 sec. (IEC 60068-2-20) Minimum Cross Section Conductor - 2.5mm 2 Marking 601, 250V, Approvals Specifications are subject to change without notice Unit Weight Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 050908 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. 4.0g (Holder) / 1.9g (Cap) / 2.9g (Insulating sleeve) WebSite www.littelfuse.com