Infrared detector modules with preamp Thermoelectrically cooled type Easy-to-use detector modules with built-in preamps Infrared detector modules operate just by connecting to DC power supplies. The detector element is selectable from among InGaAs, InAs, InSb, and InAsSb which are all combined with a thermoelectric cooler. We welcome requests for custom devices that suit your application. Features Applications High S/N Infrared detection Compact size Accessories Easy to use Operates just by connecting to DC power supply Circuit design optimized for detector characteristics Cable (for DC power supply): 2 m (connector installed at one end) A4372-03: P4631-03 A4372-07: C12485-210, C12486-210, C12483-250, C12492-210, C12494-210M, C12494-210S Instruction manual Built-in thermoelectric cooling control circuit (fixed control temperature) Structure / Absolute maximum ratings Type no. Detector element Window material Photosensitive area (mm) C12485-210 InGaAs (G12182-210K) C12486-210 InGaAs (G12183-210K) Borosilicate glass ϕ1 ϕ1 C12483-250 InGaAs (G12180-250A) AR coated (1.55 μm peak) Borosilicate glass ϕ5 C12492-210 P4631-03 C12494-210M C12494-210S InAs (P10090-21) InSb (P6606-310) InAsSb (P12691-201) InAsSb (P11120-201) Sapphire glass Supply voltage Vcc (V) Vp (V) Incident light level max. (μW) 0.06 0.07 Absolute maximum ratings Supply Operating Storage voltage temperature*1 temperature*1 Topr Tstg Vcc Vp (V) (V) (°C) (°C) +2.5 +0.5 -0.1 0.2 ϕ1 1×1 +4.5 ± 0.25 2.6 67 +7 ϕ1 +2.5 +0.5 -0.1 26 +5 ±15 ± 0.5 +5 ±18 0 to +40 -20 to +50 *1: No dew condensation When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. www.hamamatsu.com 1 Infrared detector modules with preamp Thermoelectrically cooled type Electrical and optical characteristics (Typ. Ta=25 °C, unless otherwise noted) Element temperPeak Cutoff ature sensitivity waveat rated wavelength length Type no. input λp λc voltage Td (°C) (μm) (μm) C12485-210 1.95 2.05 C12486-210 -15 2.3 2.56 C12483-250 1.55 1.66 -28 3.25 3.45 C12492-210 P4631-03 -58 5.5 6.1 6.7 8.3 C12494-210M -28 C12494-210S 4.9 5.9 Photosensitivity S λ=λp *2 Min. (V/W) 1.1 × 108 1.0 × 108 3.3 × 107 0.8 × 107 1.2 × 105 Typ. (V/W) 1.8 × 108 2.0 × 108 5.0 × 107 1.0 × 107 1.5 × 105 Noise equivalent power NEP λ=λp Typ. (W/Hz1/2) 1 × 10-13 4 × 10-13 7 × 10-14 6 × 10-12 3 × 10-11 Max. (W/Hz1/2) 3 × 10-12 6 × 10-12 7 × 10-13 1 × 10-11 6 × 10-11 5.0 × 105 7.5 × 105 1 × 10-10 3 × 10-10 Frequency response -3 dB FcL Typ. DC DC DC 5 DC (Hz) FcH Min. Typ. 1.5 k 2.2 k 2.1 k 3 k 900 1.1 k 80 k 90 k 80 k 100 k 5 80 k 100 k Current consumption*3 Maximum Output output impevoltage dance RL=1 kΩ Vcc Typ. (Ω) (V) Vp Typ. Max. (mA) (mA) ±13 +10 (mA) +30, -13 +30, -14 +30, -22 +30, -20 +80, -22 ±13 +30, -20 +80, -30 +600 +10 50 Max. (mA) +60, -30 +60, -30 +500 +50, -30 +80, -30 +600 +1100 +90, -30 +950 *2: f=100 Hz (C12485-210, C12486-210, C12483-250), f=1.2 kHz (P4631-03) *3: Vcc=±15 V, Vp=2.5 V (C12485-210, C12486-210, C12483-250, C12492-210, C12494-210M, C12494-210S), Vcc=±15 V, Vp=4.5 V (P4631-03) Recommended DC power supply (analog power supply): PW18-1.3ATS (TEXIO Technology), E3630A (Keysight Technologies) Current capacity: More than 1.5 times the maximum current consumption Ripple noise: 5 mVp-p or less (±15 V power supply) 5 mVp-p or less (+2.5 V, +4.5 V power supply) Spectral response (Typ.) 1013 C12483-250 D* (λ, 1200, 1) (cm · Hz1/2/W) C12485-210 12 10 C12486-210 C12492-210 11 10 C12494-210M P4631-03 1010 109 8 C12494-210S 10 107 1 2 3 4 5 6 7 8 9 Wavelength (μm) KIRDB0188EK 2 Infrared detector modules with preamp Thermoelectrically cooled type Dimensional outlines (unit: mm) C12485-210, C12486-210, C12483-250, C12492-210, C12494-210M, C12494-210S 26 ± 0.3 20 45 Photosensitive area 3.3 ± 0.2 Photosensitive surface 75.2 26 ± 0.3 40 (4 ×) M3 Depth 5 (threaded hole) 46 ± 0.3 Cooling fin (front side) 2 50 0.8 26.5 12 20 ± 0.3 BNC connector (signal output) 6-pin connector (voltage input) Tolerance unless otherwise noted: ±1 KIRDA0009EH P4631-03 4.6 ± 0.5 20 Photosensitive surface 3 45 34 ± 0.3 8 Photosensitive area 7 31 ± 0.3 66.5 7 45 66 0.2 ± 0.4 132.5 64.5 2 62 ± 0.3 Cooling fin (front side) (4 ×) M3 Depth 5 (threaded hole) 26.5 12 20 ± 0.3 20 ± 0.3 BNC connector (signal output) 6-pin connector (voltage input) Offset adjustment screw Tolerance unless otherwise noted: ±1 KIRDA0137EE Note: The cooling fin (front side) is removable. 3 Infrared detector modules with preamp Thermoelectrically cooled type Cable (for DC power supply) A4372-03 2000 ± 100 90 ± 10 ɸ1 10 ± 3 ɸ11 ɸ4.8 27 Connector: HR10-7P-6P (made by Hirose Electric) Solder processing Pin no. Connector Pin connection Lead color +2.5 V (or +4.5 V) Red Power supply for cooling controller GND Blue Power supply for cooling controller Output for temperatures monitor Light green +15 V Yellow -15 V White GND Black stranded wire Tolerance unless otherwise noted: ±1 KIRDA0197ED Cable (for DC power supply) A4372-07 36 90 ± 10 10 ± 2 12.3 4.8 1900 ± 10 Solder processing Connector: LF07WBP-6P (made by Hirose Electric) Pin no. Connector Pin connection +2.5 V or +4.5 V Power supply for cooling controller GND Power supply for cooling controller Output for temperature monitor +15 V -15 V GND Lead color Red Blue Light green Yellow White Black Tolerance unless otherwise noted: ±1 KIRDA0241EB 4 Infrared detector modules with preamp Thermoelectrically cooled type Precautions · Always use a dual-polarity (±15 V) power supply to operate this detector. Never use a single-polarity (+15 V or -15 V only) power supply. Using a single-polarity power supply may cause the amplifier in the detector module to break down. · Always supply +2.5 V or +4.5 V to cool the detector element. · Be careful not to apply excessive force to the detector surface. Applying excessive force may damage the light input window. Do not directly touch the light input window with bare hands. If dust or dirt gets on the window, wipe it gently using ethyl alcohol. · Do not drop this product or do not apply excessive shock to it. Related information http://www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer Technical information ∙ Infrared detectors Information described in this material is current as of June, 2016. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KIRD1036E23 Jun. 2016 DN 5