Release Notes CY3280-BMM Universal CapSense® Matrix Button Module Kit Release Date: October 20, 2011 Thank you for your interest in CY3280-BMM Universal CapSense® Matrix Button Module Kit. This document lists the installation requirements, limitations, and known bugs with release of the kit. System Requirements and Recommendations Hardware/Operating System Requirements Minimum Recommended Processor speed 1 GHz 2 GHz RAM 1 GB 2 GB Free hard drive space 800 MB 1 GB Screen resolution 1024×768 1280×1024 CD/DVD drive USB Full Speed 2.0 Hi-Speed Windows XP (SP2 or higher), Vista, or Windows 7 Software Prerequisites Minimum Recommended Microsoft Internet Explorer 7 8 Adobe Reader (for PDF documents) 6 9+ Windows Installer 3.1 3.1 .NET Framework 2.0 SP1 2.0 SP1 PSoC Programmer 3.12 3.13.1 PSoC Designer™ 5.1 5.1 SP2.1 Installation To install, insert the kit DVD into your PC's DVD-ROM drive. If the installer does not start automatically, start it manually by executing cyautorun.exe in the DVD's root directory. Follow the installation instructions on screen. Note Go to http://www.cypress.com/go/psocprogrammer for the latest version of PSoC Programmer. If you have a previous installation of PSoC Designer and PSoC Programmer, you must uninstall the same before reinstalling. To uninstall the software, go to Start > Control Panel > Add or Remove Programs and click on the Remove button adjacent to the particular software. Follow the instructions to uninstall. Updates Check http://www.cypress.com/go/cy3280-BMM documents. October 20, 2011 for the latest Document No. 001-52092 Rev. *E software downloads and -1- Limitations and Known Bugs In the code examples, CapSense sensors are tuned for 1.5 mm overlay; as a result, they can be overly sensitive when used without an overlay. Debugging of PSoC Designer “Chip-Level Design” for the CY3280-20x34 UCC is not supported in Revision ** of the CY3280-20x34 CapSense Universal Controller kit. Documentation Additional kit documentation is available in the Documentation folder on the DVD. To access PSoC Designer documentation, go to PSoC Designer > Help > Documentation. These documents can also be accessed from the installation directory. Technical Support For assistance, go to http://www.cypress.com/go/support or contact our Customer support at +1 (800) 541-4736 Ext. 8 (in the USA), or +1 (408) 943-2600 Ext. 8 (International). Silicon Errata You can access the latest versions of the silicon errata by visiting http://www.cypress.com/psoc and navigating to Errata. Additional Information For more information about PSoC Designer functionality and releases, review the user guide and release notes on the PSoC Designer web page: http://www.cypress.com/go/psocdesigner For more information about PSoC Programmer, supported hardware, and COM layer, visit the PSoC Programmer web page: http://www.cypress.com/go/psocprogrammer For a list of trainings on PSoC Designer, visit http://www.cypress.com/psoctraining October 20, 2011 Document No. 001-52092 Rev. *E -2- hampion Ct. San Jose, CA 95134-1709 USA Tel: 408.943.2600 Fax: 408.943.4730 Application Support Hotline: 425.787.4814 www.cypress.com © Cypress Semiconductor Corporation, 2009-2011. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Programmable System-on-Chip™ and PSoC Designer™ are trademarks and PSoC® and CapSense® are registered trademarks of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations. This Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. October 20, 2011 Document No. 001-52092 Rev. *E -3-