+0,2 c1 Stecklänge / mating length ESL max.94 6 ±0,1 4,8 ±0,2 0,8 ±0,1 a1 0,8 ±0,1 a32 2x2,54=5,08 8,7 +0,2 max.11,1 2,5 -0,2 85,2 c32 E = early mate, late break / voreilend S = standard 0,6 15x5,08=76,2 L = late mate, early break / nacheilend Datum 2,5 3 2,54 a b c Anforderungsstufe/ date +0,1 +0,1 RC 2 ERNI 10,2 -0,2 XXXXXXX 6,4 -0,1 12,7 5,08 5,08 3 -0,4 class Stecklänge mating length 87,5 88,9 Bestückungsplan / contact layout THR = through hole reflow Bauart 4 / type 4 Anforderungsstufe 2 = 400 Steckzyklen / performance class 2 = 400 mating cycles Fehlende Maße und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 2,8 +0,1 1 ±0,1 0,05 alle Löcher/ all holes 15x 5,08 =76,2 88,9 5,3 ±0,1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2,54 2x 2,54 =5,08 c b a 5,08 Missing information and dimensions per IEC 60 603-2 / DIN EN 60 603-2 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Leiterplatten-Lochbild / PCB drillhole pattern c b a Tolerances Information: Scale 2:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste C 32 THR Male Con. C 32 THR 384065 www.ERNI.com a 09.09.2013 Index Date Class STVC I A3