POLYFUSE® RESETTABLE FUSES SMD2016 Specifications SMD Type, 6 V - 60 V Standard Packaging UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A A Materials Approvals Terminals: cULus Recognition TÜV Features These devices offer a wide range of hold currents from 0.3 A to 2.0 A and voltages form 6 V to 60 V. The SMD2016 product line is suitable for high density circuit board applications in computers, telecommunications and general electronics. Suitable for relow soldering. Solder pad Layout (mm) Dimensions (mm) Blistertape and reel Ø 178 mm 3.4 TF: Lead free plating Max. Device Surface Temperature in Tripped State 125 °C Operating / Storage Temperature -40 ºC to +85 ºC (consider derating) Humidity Ageing +85 °C, 85 % R.H., 1000 hours, ± 5 % typical resistance change Vibration MIL-STD-883C, Method 2007.1, Condition A, no change Thermal Shock MIL-STD-202F, Method 107G +85 °C to -40 °C 20 times, -30 % typical resistance change Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3 Reflow only Solvent Resistance MIL-STD-202, Method 215, no change Marking “P”, Part Code 4.6 2.0 2.0 Dimensions (mm) Model A Min Max SMD2016P030TF SMD2016P050TF SMD2016P100TF SMD2016P100TF/33 SMD2016P150TF SMD2016P200TF 4.72 4.72 4.72 4.72 4.72 4.72 5.44 5.44 5.44 5.44 5.44 5.44 B Min Max 3.70 3.70 3.70 3.70 3.70 3.70 4.43 4.43 4.43 4.43 4.43 4.43 C Min Max 0.75 1.20 0.50 0.75 0.75 0.50 1.25 2.00 0.75 1.25 1.55 0.75 D Min E Min Max 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 packaging quantity tape 0.65 0.65 0.65 0.65 0.65 0.65 1,500 1,500 2,000 1,500 1,500 2,000 Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). ITrip (A) Vmax. dc (V) SMD2016P030TF SMD2016P050TF SMD2016P100TF SMD2016P100TF/33 SMD2016P150TF SMD2016P200TF 0.30 0.55 1.10 1.10 1.50 2.00 0.60 1.10 2.20 2.20 3.00 4.20 60 60 15 33 15 6 NOTE: I hold = I trip = Vmax = I max = 20 20 40 40 40 40 Hold current: maximum current device will pass without tripping in 20 °C still air. Trip current: minimum current at which the device will trip in 20 °C still air. Maximum voltage device can withstand without damage at rated current (I max) Maximum fault current device can withstand without damage at rated voltage (Vmax) Order Information 040606 Imax. (A) Qty. OrderNumber Model max. time to trip (s @ A) 3.00 @ 1.50 5.00 @ 2.50 0.50 @ 8.00 0.50 @ 8.00 1.00 @ 8.00 3.00 @ 8.00 Pd max. (W) 1.4 1.4 1.4 1.4 1.4 1.4 Resistance Approvals R min.(Ω) R typ.(Ω) RI max.(Ω) 0.500 0.200 0.100 0.100 0.070 0.048 1.400 0.700 0.250 0.250 0.130 0.070 2.300 1.000 0.400 0.400 0.180 0.100 TÜV Ihold (A) cURus Model • • • • • • • • • • • • Pd = Power dissipated from device when in the tripped state at 20 °C still air. Minimum resistance of device in initial (un-soldered) state. R min= R 1max= Maximum resistance of device at 20 °C measured one hour after tripping for 20 s. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Specifications are subject to change without notice Packaging In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. www.littelfuse.com POLYFUSE® RESETTABLE FUSES SMD2016 A: SMD2016P030TF B: SMD2016P050TF C: SMD2016P100TF D: SMD2016P100TF/33 E: SMD2016P150TF F: SMD2016P200TF 100.00 B C A D 10.00 Tim e to Trip (Sec.) E F 1.00 0.10 0.01 0.10 1.00 10.00 100.00 FaultC urrent(A m p.) Thermal Derating Chart Model SMD2016P030TF SMD2016P050TF SMD2016P100TF SMD2016P100TF/33 SMD2016P150TF SMD2016P200TF 040606 Ambient Operation Temperature - Ihold (A) -40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C 0.45 0.93 1.66 1.66 2.26 2.80 0.40 0.80 1.47 1.47 2.00 2.50 0.35 0.65 1.29 1.29 1.76 2.19 0.30 0.50 1.10 1.10 1.50 2.00 0.25 0.38 0.91 0.91 1.24 1.84 0.23 0.32 0.83 0.83 1.13 1.74 0.20 0.25 0.73 0.73 1.00 1.50 0.18 0.19 0.64 0.64 0.87 1.34 0.14 0.09 0.50 0.50 0.68 1.14 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. www.littelfuse.com