CY15FRAMKIT-001 Quick Start Guide.pdf

CY15FRAMKIT-001 SERIAL F-RAMTM DEVELOPMENT KIT
ArduinoTM Compatible I/O Headers (J3, J4)
I2C F-RAM (U2)
SPI F-RAM (U1)
Debug Headers
(J6, J7)
Power LED
I2C Slave Address
Selection (SW1)
Power Select
Jumper (J5)
Arduino Compatible I/O Headers (J1, J2)
CY15FRAMKIT-001 Features:
•
•
•
•
•
•
•
256-Kbit (32K x 8), up to 20 MHz, SPI F-RAM: FM25W256 (U1)
256-Kbit (32K x 8), up to 1 MHz, I2C F-RAM: FM24W256 (U2)
3.3 V or 5.0 V VDD power supply (J5)
Power status LED (LED1)
I2C slave address selection (SW1)
Arduino compatible I/O headers (J1, J2, J3, J4)
Debug headers for SPI (J6) and I2C ( J7)
CY15FRAMKIT-001 SERIAL F-RAMTM DEVELOPMENT KIT
The kit is intended to be used with Cypress PSoC® development kits and
Arduino UNO R3 boards
CY15FRAMKIT-001 kit with PSoC 4 Pioneer Kit
Download the kit installer, kit user guide and release note from
www.cypress.com/go/CY15FRAMKIT-001
Refer to the kit user guide for example projects based on PSoC 4
Pioneer Kit and Arduino UNO R3 kit
© 2015 Cypress Semiconductor Corporation.
All rights reserved. All trademarks or registered
trademarks referenced herein are the properties
of their respective owners. Doc.# 001-96168 Rev.**
Similar pages