ODUCT OBSOLETE PR ENT DED REPLACEM NO RECOMMEN pport Center at nical Su chrequest the full datasheet, contact our TeTo com/tscplease visit www.intersil.com/products/isl6247 or www.intersil. 1-888-INTERSIL ISL6247 Data Sheet July 2003 Ordering Information TEMP. (oC) PACKAGE PKG. DWG. # ISL6247CR -10 to 100 40 Ld 6x6 QFN L40.6X6 ISL6247CR-T 40 Lead 6x6 QFN Tape and Reel Lead-Free Packaging (Pb Free) • Notebook Computer IMVP-5 DC/DC converter PWM4 VCC DRSEN ENLL DSEN# ISL6247CR (40 LD QFN 6X6) TOP VIEW FS Pinout 40 39 38 37 36 35 34 33 32 31 VID4 1 30 ISEN4+ VID3 2 29 ISEN4- VID2 3 28 ISEN2- VID1 4 27 ISEN2+ VID0 5 26 PWM2 VID5 6 25 PWM1 RAMPADJ 7 24 ISEN1+ OFS 8 23 ISEN1- DVS 9 22 ISEN321 ISEN3+ OCSET 10 1 PWM3 GND VRTN VSEN VDIFF 40 Lead 6x6 QFN Tape and Reel COMP ISL6247CRZ-T 11 12 13 14 15 16 17 18 19 20 NC 40 Ld 6x6 QFN L40.6X6 FB -10 to 100 GND ISL6247CRZ SOFT PART NUMBER Applications DRSV To improve efficiency, the ISL6247 allows users to select one of two popular lossless current sense techniques. The ISL6247 supports detection via inductor coil resistance (DCR), or the rDS(ON) of the lower MOSFET. Either cost and space-saving method provides feedback for precision droop, channel current balancing, and individual channel over-current protection. A unity gain, differential amplifier is provided for remote voltage sensing. The differential amplifier eliminates errors due to potential differences between remote and local grounds. Eliminating ground differences improves regulation and protection accuracy. The channel switching frequency is adjustable in the range of 200kHz to 1.0MHz, providing flexibility in managing the balance between high-speed response, target efficiency, and good thermal management. VR-TT# Intel Mobile Voltage Positioning (IMVP) is a smart voltage regulation technology which effectively reduces power dissipation in Intel® Pentium® Processors. The ISL6247 supports the IMVP-5 mobile processor voltage regulation specifications. To boost battery life, the ISL6247 operates in Active, Deep Sleep, or Deeper Sleep modes, depending upon the logic levels at the DSEN# and DRSEN pins. A 6-bit digital-to-analog converter (DAC) allows dynamic adjustment of the core output voltage from 0.8375V to 1.6V. The controller features a thermal monitor which sends a signal to the microprocessor to reduce the load before power system components exceed their maximum thermal limits, reducing the thermal design complexity and overall core-voltage regulation cost. • Precision Multi-Phase Core Voltage Regulation - 0.6% System Accuracy Over Temperature • Microprocessor Voltage Identification Input - 6-Bit VID Input - 0.8375V to 1.600V in 12.5mV Steps - Supports VID Changes During Operation • Multiple Current Sensing Approaches Supported - Lossless DCR Current Sensing - Precision Resistive Current Sensing - Low Cost RDS(on) Current Sensing • Excellent Dynamic Response - Combined Input Voltage Feed-Forward and Pulse-byPulse Average Current Mode • DSEN# and DRSEN Logic Inputs for Low Power States • DSV Voltage Input for DEEP SLEEP Mode • DRSV Voltage Input for DEEPER SLEEP Mode • Thermal Monitor • Active Channel Current Balancing • Differential Remote Voltage Sensing • Individual Channel Over-Current, Over-Voltage, and Under-Voltage Protection • 2, 3, or 4-Phase Operation • User selectable Switching Frequency of 200K - 1.0MHz - 400kHz - 4MHz Effective Ripple Frequency • QFN Package Option - QFN Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Product Outline - QFN Near Chip Scale Package Footprint; Improves PCB Efficiency, Thinner in Profile PGOOD The ISL6247 provides microprocessor core-voltage regulation by driving up to four interleaved synchronousrectified buck-converter channels in parallel. Multi-phase buck converter architecture uses interleaved timing to multiply ripple frequency and reduce input and output ripple currents. The reduction in ripple results in fewer components, lower component cost, reduced power dissipation, and smaller implementation area. The ISL6247 multi-phase controller together with ISL6207 gate drivers forms the basis for a portable power supply solution to power Intel’s next generation mobile microprocessors. Features NTC A Mobile Multi-Phase PWM Controller with Precision Current Sensing FN9113.0 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas LLC. Copyright © Intersil Americas LLC. 2003. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. ISL6247 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 ISL6247 3