DATASHEET

ISL6415
®
Data Sheet
PRELIMINARY
December 27, 2004
FN9145.0
Triple Output Regulator with Single
Synchronous Buck and Dual LDO
Features
The ISL6415 is a highly integrated triple output regulator
which provides a single chip solution for wireless chipset
power management. The device integrates a high efficiency
synchronous buck regulator with two ultra low noise LDO
regulators. The IC accepts an input voltage range of 3.0V to
3.6V and provides three regulated output voltages: 1.2V
(PWM), 1.8V (LDO1), and another ultra-clean 1.8V (LDO2).
• High Output Current (For QFN package)
- PWM, 1.2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mA
- LDO1, 1.8V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mA
- LDO2, 1.8V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA
The Synchronous current mode PWM regulator with
integrated N- and P- channel power MOSFET provides preset 1.2V for BBP/MAC core supply. Synchronous
rectification with internal MOSFETs is used to achieve higher
efficiency and reduced number of external components.
Operating frequency is typically 750kHz allowing the use of
smaller inductor and capacitor values. The device can be
synchronized to an external clock signal in the range of
500kHz to 1MHz. The PG_PWM output indicates loss of
regulation on PWM output.
• High Conversion Efficiency
• Fully Integrated Synchronous Buck Regulator + Dual LDO
The ISL6415 also has two LDO regulators which use an
internal PMOS transistor as the pass device. LDO2 features
ultra low noise that does not typically exceed 30µV RMS to
aid VCO stability. The EN_LDO pin controls LDO1 and
LDO2 outputs. The ISL6415 also integrates a RESET
function, which eliminates the need for additional RESET IC
required in WLAN applications. The IC asserts a RESET
signal whenever the VIN supply voltage drops below a
preset threshold, keeping it asserted for at least 25ms after
VIN has risen above the reset threshold. The PG_LDO
output indicates loss of regulation on either of the two LDO
outputs. Other features include overcurrent protection for all
three outputs and thermal shutdown.
High integration and the thin Quad Flat No-lead (QFN)
package makes ISL6415 an ideal choice to power many of
today’s small form factor industry standard wireless cards
such as PCMCIA, mini-PCI and Cardbus-32.
Ordering Information
PART NUMBER*
TEMP.
RANGE (°C)
PACKAGE
PKG.
DWG. #
• Ultra-Compact DC-DC Converter Design
• Stable with Small Ceramic Output Capacitors
• Low Shutdown Supply Current
• Ultra-Low Dropout Voltage for LDOs
- LDO1, 1.8V. . . . . . . . . . . . . . . . 125mV (typ.) at 300mA
- LDO2, 1.8V. . . . . . . . . . . . . . . . 100mV (typ.) at 200mA
• Ultra-Low Output Voltage Noise
- <30µVRMS (typ.) for LDO2 (VCO Supply)
• PG_LDO, PG_PWM and PG_PWM outputs
• Extensive Circuit Protection and Monitoring Features
- Overvoltage protection
- Overcurrent protection
- Shutdown
- Thermal Shutdown
• Integrated RESET output for microprocessor reset
• Proven Reference Design for Total WLAN System
Solution
• QFN Package
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat
No Leads - Product Outline
- Near Chip-Scale Package Footprint Improves PCB
Efficiency and Is Thinner in Profile
• Pb-Free Available (RoHS Compliant)
Applications
• WLAN Cards
- PCMCIA, Cardbus-32, Mini-PCI Cards
- Compact Flash Cards
• Liberty Chipset
ISL6415IR
-40 to 85
24 Ld QFN
L24.4x4B
• Hand-Held Instruments
ISL6415IRZ (Note)
-40 to 85
24 Ld QFN (Pb-free) L24.4x4B
Related Literature
*For tape and reel, add “-TK” or “-T5K” suffix.
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
• TB363 - Guidelines for Handling and Processing Moisture
Sensitive Surface Mount Devices (SMDs)
• TB389 - PCB Land Pattern Design and Surface Mount
Guidelines for QFN Packages
Final pinout and specifications are subject to change.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ISL6415
Pinout
SGND
VIN
PVCC
LX
PGND
GND
ISL6415 (QFN
TOP VIEW)
24
23
22
21
20
19
SYNC
3
16 VOUT2
NC
4
15 GND_LDO
EN_PWM
5
14 VOUT1
PG_LDO
6
13 CC1
7
8
9
10
11
12
EN_LDO
17 CC2
RESET
2
VIN_LDO
PG_PWM
VIN_LDO
18 VOUT
CT
1
RESET
PG_PWM
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
2
FN9145.0
December 27, 2004
Similar pages