Datasheet (PDF)

Gigabit Media Converters
EL9100 Series
Hardened 10/100/1000BASE-TX to 1000BASE-SX/LX/BX
Media Converter
UL508
Overview
The EL9100 Series provides media conversion between 10/100/1000BASE-T(X) and 1000BASE-SX-LX Fiber. Built specifically
for mission-critical applications in harsh environments, the EL9100’s hardened design features high shock & vibration
resistance, electrical noise immunity, wide operating temperature range from -40°C to 75°C, and ruggedized aluminum
housing. With triple power inputs, link down alarming, Link-Fault-Pass-Through and a wide range of fiber connectivity
options, the EL9100 is the ideal media converter for environments where connectivity is crucial.
Spotlight
•Gigabit Connectivity
◦◦ Auto 10/100/1000BASE-TX and 1000BASE-SX/LX/BX Ethernet transmission conversion
◦◦ 1000Mbps Full duplex, 10/100MBps Full/Half duplex
◦◦ Full wire-speed forwarding rate
•UL508 Certification
◦◦ Specific design for industrial communication applications with UL508 safety certification
•Wide Operating Temperature
◦◦ -40°C to 75°C wide operating temperature range design is suitable for installation in outdoor cabinet
EL9100 Series
1
www.EtherWAN.com
rev. A1.1
Hardware Specifications
Technology
Standards
DIP Switch
•IEEE802.3 10BASE-T
•IEEE802.3u 100BASE-TX
•IEEE802.3ab 1000BASE-T
•IEEE802.3z 1000BASE-SX/1000BASE-LX
•IEEE802.3x full duplex and flow control
•No.1: LFPT on/off
•No.2: Alarm for copper port on/off
•No.3: Alarm for fiber port on/off
•No.4: Auto-negotiation for fiber port on/off
Alarm Contact
Forward and Filtering Rate
•Relay contact rating with current
1A @ 30VDC, 0.5A @ 120VAC
•1,488,100pps for 1000Mbps
Processing Type
Environment
•Auto Negotiation
•Half duplex back-pressure and IEEE802.3x full-duplex flow
control
•Auto-MDI/MDIX
Operating Temperature
•-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Power
Storage Temperature
•-40°C to 85°C (-40°F to 185°F)
Input Voltage
Ambient Relative Humidity
•12 to 48VDC (Terminal Block)
•12VDC (DC Jack)
•5% to 95% (non-condensing)
Regulatory Approvals
Power Consumption
•7.68W Max, 0.16A @ 48VDC
ISO
Protection
•Manufactured in an ISO9001 facility
•Overload current protection
•Reverse polarity protection
EMI
FCC Part 15B, Class A
EN61000-6-4
EN55022
EN61000-3-2
EN61000-3-3
Safety
UL508
EMS
EN61000-6-2
Mechanical
Casing
•Aluminum Case
•IP30
Dimensions
•50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight
•0.8Kg (1.76lbs.)
Installation
•DIN-Rail (Top hat type 35mm), Panel, or Rack mounting
•EN61000-4-2 (ESD Standards)
•EN61000-4-3 (Radiated RFI Standards)
•EN61000-4-4 (Burst Standards)
•EN61000-4-5 (Surge Standards)
•EN61000-4-6 (Induced RFI Standards)
•EN61000-4-8 (Magnetic Field Standards)
Interface
Ethernet Port
•10/100/1000BASE-TX: 1 port
•1000BASE-SX/LX/BX: 1 port
LED Indicators
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
IEC60068-2-27 Ea (Shock)
FED STD 101C Method 5007.1 (Free fall w/ package)
Industrial Compliance
NEMA TS1 & TS2
•Per Unit: Power1
Power2
Power3
Fault
LFPT
•Per 10/100/1000BASE-TX Port: Link/ACT
100M
1000M
Full-duplex/Collision
•Per 1000SX/LX/BX Port: Link/Act
EL9100 Series
2
www.EtherWAN.com
rev. A1.1
Application Diagram
Telecommunication Room A
Telecommunication Room B
Gigabit Switch
Gigabit Switch
Cat.5
Fiberoptic
Ethernet
Max. distance up to 120km
1000BASE-SX/LX/BX fiber
EL9100 Series
EL9100 Series
Building-to-building application
2
er
D
1
er
w
Po
GND
er
w
Po
w
Po
-
+
3
Dimensions
-
+
50mm (1.97”)
135mm (5.31”)
Top
Front
Side
Back
110mm (4.33”)
Bottom
EL9100 Series
3
www.EtherWAN.com
rev. A1.1
Ordering Information
Model
EL9100-X1B
10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter
Gigabit Port Options (X)
3
1000BASE-SX(SC) - 550m
4
1000BASE-SX (SC) - 2Km
5
1000BASE-SX (ST) - 550m
A
1000BASE-LX (SC) - 10Km
B
1000BASE-LX (SC) - 20Km
E
1000BASE-LX (SC) - 40Km (1310nm)
H
1000BASE-LX (ST) - 10Km (1310nm)
I
1000BASE-LX (ST) - 20Km (1310nm)
R
1000BASE-BX (SC) WDM-TX:1310nm/RX:1550nm - 20Km
S
1000BASE-BX (SC) WDM-TX:1550nm/RX: 1310nm - 20Km
* DIN-Rail mounting kit included
Optional Accessories
DR-30-24
30W/1.5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
DR-60-24
60W/2.5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
DR-75-24
75W/3.2A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
DR-120-24
120W/5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block)
41-136046-X
36W/3A 12VDC hardened power adapter with open wire in aluminum housing (For Terminal Block);
(X) = 1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA
41-136044-X
36W/3A 12VDC hardened power adapter with latched DC jack in aluminum housing (For DC Jack);
(X) = 1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA
EL9100 Series
4
www.EtherWAN.com
rev. A1.1
Similar pages