Datasheet (PDF)

ED3538
Hardened 10/100BASE-TX PoL/PoE Ethernet Extender
over Copper Wires
UL
60950
™
Overview
The ED3538 Hardened Ethernet Extender utilizes EtherWAN’s exclusive Power over Link™ (PoL™) technology to deliver both PoE
power and Ethernet communications over a single legacy twisted pair cable. The ED3538 PoL solution is comprised of an ED3538
Transmitter and Receiver working together to provide reliable communications and power to remote PoE Powered Devices (PD).
When remote connectivity and power is required on legacy cable, the ED3538 transceiver connected with an AC/DC power
provides 30 watts of power and a bandwidth of 100Mbps to be delivered to the ED3538 receiver. The ED3538 receiver in turn
powers up a remote PoE device such as an IP camera, a wireless access point, an emergency intercom, or a VoIP phone.
When the application demands long-distance and more power delivery, the ED3538 can also be connected with power at both
ends, to maximize the transmission distance to 2200 meters.
The ED3538 is compliant with UL60950-1 / IEC60950-1 / EN61000-6-4 / EN61000-6-2 standards with high electromagnetic
sustainability and IEC60068 standards against shock and vibration, ensuring a reliable connection under harsh environments.
Spotlight
•Power over Link™ up to 1.2 km (3936 ft.)
◦◦ Over an 1200 meters long RJ11 cable, a guaranteed 5 watts power with 20Mbps bandwidth is delivered to the receiving side
•Ethernet extension solution with high transmission data rate up to 100Mbps
◦◦ Up to 300 meters transmission distance with 100Mbps data rate
•Transmission rate and PSE output power indicator LEDs
◦◦ Six transmission rate LEDs and three PoE/PSE output power LEDs on the front panel
ED3538
1
www.EtherWAN.com
rev. A1.2
Hardware Specifications
Technology
Standards
Distance / Speed / PoE Output Reference
•IEEE802.3 10BASE-T
•IEEE802.3u 100BASE-TX,
•IEEE802.3x full duplex and flow control
•IEEE802.3af/at PoE/PSE
PoL™ Enabled
Distance
Protocols
•Transparent to higher layer protocols
Processing Type
•IEEE802.3x Full-duplex flow control
•Auto-Negotiation
•Auto MDI/MDIX
Power
ED3538R PoE Output
300m
100Mbps
30.0W
400m
90Mbps
15.4W
600m
60Mbps
14.0W
800m
45Mbps
9.5W
1000m
35Mbps
7.0W
1200m
20Mbps
5.0W
Input
PoL™ Disabled (Power supply on 3538R)
• Terminal Block: 46 - 57VDC
• DC JACK: 48VDC
• 2.5A @ 48VDC (Peak current 3.26A)
Distance
Power Consumption
•Max. 65W with Power over Link™ (PoL) function enabled
•ED3538T: Max. 5W (without PoL / PoE)
•ED3538R: Max. 5W (without PoL / PoE)
Max. 35W (with PoE only)
Data Rate
ED3538R PoE Output
1400m
15Mbps
30.0W
1600m
10Mbps
30.0W
1800m
3Mbps
30.0W
Up to 2200m
1Mbps
30.0W
NOTE: Reference Performance on 24 AWG copper wire
(0.5mm diameter, 1-pair wire, Cable impendence: 100ohm)
Protection
•Overload current protection
•Reverse polarity protection
Environment
Mechanical
Operating Temperature
•-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Casing
•Aluminum case
•IP30
Storage Temperature
•-40°C to 85°C (-40°F to 185°F)
Dimensions
Ambient Relative Humidity
• 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
•5% to 95% (non-condensing)
Regulatory Approvals
Weight
• 0.8Kg (1.76lbs.)
ISO
Installation
•Manufactured in an ISO9001 facility
•DIN-Rail (Top hat type 35mm), Panel or Rack mounting
Safety
UL60950-1, IEC60950-1
EMI
FCC Part 15B, Class A
EN61000-6-4, EN55022, EN61000-3-2 and EN61000-3-3
EMS
EN61000-6-2
Interface
Ethernet Port
•ED3538T/R: 1 x 10/100BASE-TX Full-duplex RJ-45 port
•ED3538R: 1 x PoE/PSE port
•Speed: 10/100Mbps
•Cable: 100BASE-TX, UTP CAT. 5 (4-pair wire)
•Distance: 100 meters (328ft.)
Ethernet Extender Port
•1 x RJ11 port
•1 x 2-pin Terminal Block (Wire range: 12 - 30 AWG)
•EN61000-4-2 (ESD Standards)
•EN61000-4-3 (Radiated RFI Standards)
•EN61000-4-4 (Burst Standards)
•EN61000-4-5 (Surge Standards)
•EN61000-4-6 (Induced RFI Standards)
•EN61000-4-8 (Magnetic Field Standards)
DIP Switch
•ED3538T: PoL: ON/OFF, Type: Perf/Std
•ED3538R: Mode: Loc/Rmt, Type: Perf/Std
LED Indicators
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration), IEC60068-2-27 Ea (Shock),
IEC60068-2-32 Ed (Free fall w/ package)
•Per Unit: Power
•Per 10/100TX Port: Link/Activity, Full-duplex
•Line Speed: Six indicators for 100/80/60/40/20Mbps and
Link below 20Mbps
•PoE: Power over Ethernet function availability
ED3538
Data Rate
2
www.EtherWAN.com
rev. A1.2
Dimensions
110mm (4.33”)
Front
(ED3538T)
Top
(ED3538R)
Side
Back
135mm (5.31”)
145.5mm
50mm (1.97”)
Top
(ED3538T)
Front
(ED3538R)
Bottom
(ED3538T)
Bottom
(ED3538R)
Application Diagram
PC / Ethernet Switch
PoE Camera
48VDC
Power Supply
POWER & DATA
Cat.5
Ethernet
Up to 1.2 Km
ED3538T
ED3538
ED3538R
3
Long Distance
Ethernet without a
power cord in the
end device.
Phone-
Cable
www.EtherWAN.com
rev. A1.2
Ordering Information
Model
ED3538
Hardened PoL/PoE Ethernet Extender over Copper Wires (including one ED3538T and one ED3538R)
Note:
* ED3538T is the power transmitter of PoL and ED3538R is the power receiver of PoL
* DIN-Rail mounting kit included
Optional Power Supplies
Power supply suggestion
30 watts PoE application
SDR-120-48 / DR-120-48 (120W 48VDC)
For 1 pair
SDR-240-48 (240W 48VDC)
For 3 pairs
SDR-480-48 (480W 48VDC)
For 7 pairs
ED3538
4
www.EtherWAN.com
rev. A1.2
Similar pages