Click Here to download this file: /data/power/MYBSB3R315ABT.pdf

MYBSB3R315ABT DATA Sheet
1
DC-DC Converter DATA Sheet
MYBSB3R315ABT
1. Features
・Standard Sixteenth-brick package.
・High efficiency and smll size product.
・Long life and high reliability design.
・Adjustable output voltage range by connecting external resistance.
(80%~110%)
・UVLO function,ON/OFF function,Output voltage sense function,
Over-current protection,Over-voltage protection,Thermal shutdown
are built in.
2. Appearance, Dimensions
Marking of No.1 pin
3 3 ±0
. 0. 5
(10.0)
. 7. 5
2 2 ±0
(3 . )7 3
( 2 . 5 4 )
2 7 .±0
9 4. 2 5
φ 7.0 Pick and place location
(13.55)
8
1
7
2P
2
4P
6
2P
5
3
4
MFG,ID
Lot No.
8.9±0.4
Parts №
P=3.81±0.25
8-φ 1.57
0.10
Marking
(1) Parts No.
(2) MFG,ID
P2N
(3) Lot No.
[unit:mm]
□□□
①②③
① Production Factory
② Production Year
③ Production Month
(1,2,3・・・9X,Y,Z)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
2
※Pin Number, Function
Pin No.
1
2
3
4
5
6
7
8
Signal
Vin(+)
ON/OFF
Vin(-)
Vout(-)
SENSE(-)
TRIM
SENSE(+)
Vout(+)
Function
Positive Input Voltage
Remote ON/OFF
Negative Input Voltage
Negative output Voltage
Negative Remote Sense
Output Voltage Adjustment
Positive Remote Sense
Positive output Voltage
3. Block Diagram
+SENSE
(7)
+VOUT
(8)
+VIN
(1)
SWITCH
CONTROL
-VOUT
(4)
-VIN
(3)
-SENSE
(5)
REMOTE
ON/OFF
CONTROL
(2)
PROTECTIONS
PWM
CONTROLLER
OPTO
COUPLER
REFERENCE &
ERROR AMP
TRIM
(6)
Figure1. Simplified Schematic
4. Environmenral Conditions
4.1. Operating Temperature Range -40°C ~ +85°C
(Please refer the temperature derating.)
4.2. Storage Temperature Range -45°C ~ +105°C
4.3. Operating Humidity Range
20% ~ 85% (No dew deposit)
4.4. Storage Humidity Range
10% ~ 95% (No dew deposit)
5. Absolute Maximum Ratings
Item
Minimum Input Voltage
Time
Maximum
Input Voltage
Continuous
100ms
Unit
V
V
V
Absolute Rating
0
75
100
Remarks
※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to
this product.
If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will
be destroyed.
Even though it may continue operating for a while after the over-voltage event, its life will likely be shortened
significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage rating is
continuously exceeded. This product is designed to operate within the maximum operating voltage
rating specification.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
3
6. Electrical Characteristics
6.1. Specific Characteristics (Ta=40~+85 oC with temperature derated.) Test circuit is mentioned in section 9.
Value
Item
Symbol
Input Voltage
Vin
Turn-on Input Voltage
UVLO
Condition
Vin=increasing
Input Voltage difference of
Turn-on and Turn-off
Vin=Min~Max
Iout=Min~Max
Unit
Min.
Typ.
Max.
36
48
75
V
32
-
36
V
-
2.0
-
V
3.201
3.3
3.399
V
Output Voltage
Vout
Output Voltage Adjustable
Range
Vout(adj)
-20
-
+10
%
Output Current
Iout
0
-
15.0
A
Ripple Voltage
Vripl
Vin =48V, Iout=Max
BW=20MHz
-
-
100
mV(pp)
Efficiency
EFF
Vin =48V, Iout=15A
o
Ta=25 C
-
90.5
-
%
Start up delay time
ts
Vin=Min~Max
Iout=Min~Max
Vin connection to Vout × 90%
-
15
-
ms
Von
0
-
0.5
Voff
2
-
-
-
5
-
ms
ON/OFF pin
Control Voltage
V
Vin=Min~Max
Iout=Min~Max
RC connected with to Vout × 90%
RC start up delay time
trc
Setting point of Over
Current Protection
OCP
Vin=Min~Max
15.45
-
-
A
Setting point of Over
Voltage Protection
OVP
Vin=Min~Max
3.96
-
-
V
DC for one minute
1500
-
-
V
Ceramic capacitor
0
-
1000
µF
Input to Output Isolation
Voltage
External Output
Cout
Capacitance
Item
Value
Protection
If output is shorted , or output voltage is over the value specified in OVP , or
DC-DC converter is heated abnormally, DC-DC converter will enter a hiccup
mode where it repeatedly turn on and off. After rejected the abnormal mode,
DC-DC converter will automatically restart. However output short, output
over voltage, and abnormal heating affect long-term reliability.
Safety standards
Recognized UL60950
Flame resistance
Meet UL94V-0
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
4
6.2. Temperature Derating <For Reference Only>
(1)Air flow 1.0m/s (With no Heat sink)
MYBSB3R315ABT
Thermal derating
Input Voltage 48V Air Flow 1.0m/s
Output Current (A)
15
13.7A
10
5
78C
0
-40
-20
0
20
40
60
80
85C
100
Ambient Temperature(℃)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
5
7. Operation information
7.1. To Adjust Output Voltage
・When TRIM-pin (6pin) is left open, DC-DC converter applies nominal output voltage.
・Resistors connected between TRIM-pin(6pin) to SENSE(+)-pin (7pin) will increase the output
voltage (Vo,adj)
between 100% ~ 110% of the nominal output voltage(Vo,nom). (Vout-Up control)
・Resistors connected between TRIM-pin(6pin) to SENSE(-)-pin (5pin) will decrease the output
voltage(Vo,adj)
between 80% ~ 100% of the nominal output voltage(Vo,nom). (Vout-Down control)
・The following equations give the required external-resistor value to adjust the output voltage to Vo,adj.
After calculating external resistance, it is necessary to check the output voltage and to adjust of the
resistance value at your board conditions.
・When you increase the output voltage,
 5.11  Vo 100(%) Δ(%) 5.11  100(%)

kΩ
Radj - up=
- 10.22 1.225 Δ(%)
Δ(%)


where,
Δ
Vo, adj - Vo, nom
 100(%)
Vo, nom
・when you decrease the output voltage,
 5.11 100(%)

kΩ
Radj - down=
- 10.22 Δ(%)


where,
Δ
Vo, nom - Vo, adj
 100(%)
Vo, nom
・If you change output voltage, it is necessary to evaluate the characteristics of DC-DC converter at your
board conditions.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
6
7.2. ON/OFF control
・On control
ON/OFF Pin (2Pin) should be connected to Vin(-) Pin (3Pin), or keeps less than 0.5V.
・Off control
ON/OFF Pin (2Pin) should be opened, or the current from ON/OFF Pin (2Pin) to Vin(-) Pin (3Pin) is
controlled less than 50uA.
MYBSB3R315ABT
2
example
3
Vin(-)
ON/OFF
or
The voltage of maximum 10V appears in the ON/OFF pin at the time of pin opening.
7.3. External input capacitor
When a inductance or a switch devise is connected to Input line, or when the transient response of input
power supply is bad, input voltage is greatly changed at the time of load sudden change of
DC-DC converter.
Since the load response of DC-DC converter may not be normally demonstrated by this influence, and
DC-DC converter may cause unusual oscillation、in such a case, please connect an external input
capacitor.
7.4. Output voltage remote sense
It has the remote sense function which corrects a voltage drop by the line drop from the power supply
output terminal to the load terminal .
A voltage drop by the line drop can be corrected by connecting No.5 pin and No.7 pin to the load
terminal part.
At the time of a remote sense, a remote sense line is to use a shielding wire, a twist line, a side by side
pattern, and so on , and reduce the influence of the noise.
A Output Voltage Remote Sense Range is Vout (nom) within +5%. And, use an output voltage within the
output adjustment range.
Short-circuit No.4 -No.5 terminal and No.7- No.8 terminal respectively when a remote sense shouldn't be
necessary.
If you use an output voltage remote sense, it is necessary to evaluate the characteristics of DC-DC
converter at your board conditions.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
7
8. Reliability
8.1. Humidity Test
Subjected to a temperature 40℃±2℃ with 90~95% for 100 hours.
Return to room temperature (25℃) for 2 hours and measure. The initial values in item 6.1 should be
met. (JIS-C-0022)
8.2. Thermal Cycle Test
Subjected to 5 cycle of the following.
Placed in room temperature (25℃) for 2 hours and are measured.
The initial values in item 6.1 should be met.
Step
Condition
Time
1
-40°C±3°C
30 minutes
2
Room Temp.
5~10 minutes
3
+85°C±2°C
30 minutes
4
Room Temp.
5~10 minutes
8.3. Vibration
10 to 55Hz,1.5mm amplitude,1 hour for each of X,Y,Z directions.
No damage in appearance and no deviation from electrical characteristics.(section 6.1)
8. 4. Mechanical Shock
20G,1 time for each X,Y,Z directions.
No damage in appearance and no deviation from electrical characteristics.(section 6.1)
8. 5. Soldering Heat Resistance
Touch a solder iron to the pin of DC-DC Converter for 3±0.5 seconds.
Solder iron : MAX 30W , 350℃
There should be no damage in appearance.
Measure the DC-DC Converter after 2 hours and the initial values in item 6.1 should be met.
8. 6. Pull Strength
Fasten the body of DC-DC Converter and pull the lead gradually in a radial direction with
5.0N load, keep the load for 5 seconds. The body should not be damaged thereafter.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
8
9. Test Circuit
In the following test circuit, the initial values in item 6.1 should be met.
9.1. General Measure Circuit
1
10mΩ
v
v
Vin
Vin(+)
8
1mΩ
v
MYBSB3R3
15ABT
C1
3
Vout(+)
RL
v
Vin(-)
Short =ON
Open =OFF
2
Vout(-)
ON/OFF
4
C1:
Low Impedance Electrolytic Capacitor 33μF
RL:
Electronic Load Device :Model EUL150αXL Fujitsu DENSO equivalent
Vin:
DC Power Supply :Model HP6675A HP equivalent
V :
Digital Multimeter :Model HP34401A HP equivalent
※When deviating from the above, DC-DC converter may operate abnormally. It should be fully confirmed
on your board before use.
9.2. Ripple Nise Test
50mm
DC-DC
Converter
C1
C2
1.5m50Ω
Coaxial cable
LOAD
TRC-50F
Terminating resistance
Oscilloscope
BW=150MHz
C1 : Ceramic Capacitor 0.1μF
C2 : Low Impedanse Tantalum Capacitor 10μF
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
9
10. Packaging Specification
10.1. Emboss Tape Dimensions
φ330±2
10.2. Real Dimension
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
10
10.3. Taping Specification
Epmty portion
(200mm MIN)
Epmty portion
(200mm MIN)
Leader portion
(200mm MIN)
Module on tape portion
Indication
Pulling direction
10.4. Note
1. The adhesive strength of the protective tape must be within 0.1~1.3N.
2. Each reel contains 140pcs.
3. The deficiency per reel is 0 piece.
4. The reel shows customer part number, Murata part number and quantity.
5. The color of reel is not designated.
11. Production factory
Komatsu Murata Mfg.Co., Ltd.
Kanazu Murata Mfg. Co., Ltd.
Wakura Murata Mfg. Co., Ltd.
Shenzhen Murata Technology Co., Ltd.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
11
12. Typical Characteristics Data
12.1. Transient Response
Iout
5A/div
Iout
5A/div
Vout(OFFSET:3.3V)
100mV/div
Vout(OFFSET:3.3V)
100mV/div
Time:200uS/div
Time:200uS/div
Fig.12-1a. Load Transient Response (25%Load Step)
Fig.12-1b.Load Transient Response (50%Load Step)
12.2. Enable Start-up
On/Off Control
2V/div
On/Off Control
Vout
1V/div
2V/div
Vout
1V/div
Time:4mS/div
Time:4mS/div
Fig.12-2a. Enable Start-up(Vin=48V Iout=0A)
Fig.12-2b. Enable Start-up(Vin=48V Iout=15A)
12.3. Ripple and Noise (0.1μF Ceramic plus 10μF Tantalum)
Vout
20mV/div
Vout
20mV/div
Time:2uS/div
Fig.12-3a. Ripple Waveform(Vin=48V Iout=0A)
Time:2uS/div
Fig.12-3b. Ripple Waveform (Vin=48V Iout=15A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
12
12.4. Efficiency v.s. Output Current
MYBSB3R315A**
Efficiency 25C
95
Efficiency (%)
90
85
36Vin
48Vin
75Vin
80
75
70
0
5
10
15
Output current (A)
Fig.12-4. Efficiency Curves
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
13
13. Mounting Condition
13. 1. Soldering
13.1.1. Flux
Please solder the product with Rosin Flux, which contains chlorine 0.2wt% or less.
Please do NOT use acid flux or water-soluble flux, which could corrode metals and glass of the product.
13.1.2. Solder
Please use the solder or the solder paste Sn96.5/Ag3/Cu0.5 or the equivalent type.
Bismuth and Indium contained solder may affect solder connection of the solder ball pins.
Please evaluate solderability enough for products approval.
13. 1.3. Recommended Soldering Conditions
Reflow Solder
Method
:
Full convection reflow soldering
Reflow Soldering Profiles
JEDEC IPC/JEDEC J-STD-020D
Table 5-2 Classification Reflow Profile
Pb-Free Assembly Large Body
Profile details
Soldering temperature
Soldering time
Heating time
Preheating time
Programming rate
Descending rate
Total soldering time
Times
:
:
:
:
:
:
:
:
245ºC+0/-5ºC
30 seconds, 240 to 245ºC
60 to 150 seconds, over217ºC
60 to 120 seconds,150 to 200ºC
3ºC/ sec. Max., 217 to 245ºC
6ºC/ sec. Max.
8 minutes Max., 25 to 245ºC
1 time
2 4 5oC
2 17 oC
Parts surface temperature [ºC]
200 oC
60~150
(seconds)
1 50 o C
60~120 (seconds)
Times
※Do not vibrate for the products on reflow.
Please need to take care temperature control because mounted parts may come off if the product are left
under the high temperature.
Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a substrate
during reflowing.
Substrate
DC-DC Converter
This product adopts solderball pin. The solder ball melts in your reflow and coplanarity≦0.1mm
is satisfied.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
14
13.2. Cleaning
13.2.1. When cleaning the products, please wash the products in isopropyl alcohol for up to 5 minutes using
the dipping, boiling, and vapor methods.
Please inform us if you are to use aqueous or semi-aqueous cleaning or another methods.
Do not use ultrasonic cleaning because semiconductor device on the products, bonding wires may
be broken by resonance.
13.2.2. After cleaning, please dry the products thoroughly. If you touch the products that have not been
dried enough yet, you need to take care because the marking of the products may get thin or blurred.
Do not measure electrical characteristics, until the products get dried enough.
13.2.3. If you use no-cleaning type flux and you don’t clean our products, please confirm the reliability of
the products fully in advance.
14. Notice
14.1. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that
may becaused by the abnormal function or the failure of our product.
14.2. Please connect the input terminal by right polarity. If you mistake the connection , it may break the
DC-DC converter. In the case of destruction of the DC-DC converter inside, a large input current may
flow. Please add a diode and fuse as follows.
fuse
+
+
+
diode
IN
-
OUT
Load
-
Rated Fuse Current:5A
※Please select a diode and fuse after confirming the operation.
14.3. Storage
14.3.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot
come in and use the products within 6 months after delivery.
Avoid damp heated places or such places where there are large temperature changes, because water
may condense on the products, the characteristics may be reduced in quality, and/or be degraded in
the solderability.
If you store the products for a long time (more than 1 year), use caution because the products may
be degraded in the solderability and/or rusty.
Please confirm solderability and characteristics for the products regularly.
14.3.2. Please do not store the products in the places such as:
in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas
(Cl2,NH3,SO2,NOX and so on).
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
15
14. 4. Operational Environment and Operational Conditions
14.4.1. Operational Environment
The products are not waterproof, chemical-proof or rustproof.
In order to prevent leakage of electricity and abnormal temperature increase of the products ,
do not use the products under the following circumstances:
(1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water condenses
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1)through (5)
14.4.2. Operational Conditions
Please use the products within specified values (power supply, temperature, input, output and load
condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is
included in specified values.
If you use the products over the specified values, it may break the products, reduce the quality, and even
if the products can endure the condition for short time, it may cause degradation of the reliability.
14.4.3. Note prior to use
If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause
defects in the products or degrade the reliability.
Please avoid the following items:
(1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line
(2) electrostatic discharge by production line and/or operator
(3) electrified product by electrostatic induction
Do not give an excessive mechanical shock.
If you drop the products on the floor, etc., it may occur a crack to the core of inductors and
monolithic ceramic capacitors.
Do not give a strong shock such as a drop in handling.
Do not bend this product much more than 0.1mm.
14.5. Transportation
If you transport the products, please pack them so that the package will not be damaged
by mechanical vibration or mechanical shock, and please educate and guide a carrier to prevent
rough handling.
If you transport the products to overseas (in particular, by sea), it is expected that the
transportation environment will be the worst, so please pack the products, in the package designed on
the consideration of mechanical strength, vibration-resistant and humidity-resistant.
The package of the products, which Murata sells in Japan, may not resist over sea transport.
Please consult us if you are to use the Murata package of the products sold in Japan for transport
to overseas.
!
Note
1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed
with this product actually assembled on their product.
2. Please contact our main sales office or nearby sales office before using our products for the applications
listed below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
MYBSB3R315ABT DATA Sheet
16
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
3. This data sheet is indicated in July 2012. About the written contents, since changing without a preliminary
announcement for improvement and supply are sometimes stopped, please confirm in case of ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.1.22
Similar pages