Datasheet (PDF)

FIM Series
Flash in Module
Power Consumption
Enclosure Material
Dimensions
IDE 40pin Flash Module
150mA(max.)
Physical Specification
PC Mechanical Cover and UL-94
40-pin: 60.2 x 27.8 x 6.4mm (W x H x L)
44-pin: 50.3 x 27.3 x 5.8mm (W x H x L)
■ Features
 IDE/ATA standard interface
 Capacity: 128MB to 4GB
 Master/slave switch selectable
 Suitable for high demanding applications
 Well performed under harsh operating environment and
IDE 44pin Flash Module
industrial temperatures
■ Introduction
 Anti-vibration & shock resistance
AXIOMTEK’s FIM (Flash in Module) series is designed into ATA protocol
type with compatible IDE standard interface based on flash memory
technology. This flash module is offered with various capacities
ranging from 128MB up to 4GB and can operate under industrial
temperature range goes from -40°C~85°C in the harsh operating
environments. The features of reliability, high performance,
cost-effective and easy-to-integrate designs make FIM series a
 Data integrity with Error Detection Code/Error Correction
Code (EDC/ECC)
 Perfect replacement of hard drive, compatible with IDE/ATA
40-pin and 44-pin
 High operating reliability & durability
 Low power consumption
 Fully compatible with devices and OS
perfect solution over traditional storage devices.
■ Specifications
General Specification
128MB~16GB
40pin/44pin IDE/ATA
PIO Mode 0-4/MwDMA Mode 0-2/UDMA 0-2
Mode
Sustained Speed Rate 128MB~512M : Read: 20MB/sec ; Write:
10MB/sec
1GB~4GB : Read: 40MB/sec ; Write: 20MB/sec
Environmental Specification
Operating
0˚C~70˚C (14°F ~158°F) (standard temp.)
Temperature
-40˚C~85˚C (-40 °F ~185°F) (industrial temp.)
Storage Temperature -55˚C~125˚C (-67°F ~ 257°F)
Humidity
10%~95% non-condensing
Vibration
5G(7~2000Hz)
Shock
50G/10ms
System Reliability
ECC technology
High reliability based on the internal ECC
function
MTBF
>3,000,000 hours
R/W Endurance
2,000,000 times
Wear-leveling
Support
Power Requirment
DC Input Voltage
+3.3V/+5V single power supply operation
Power Mode
Auto stand-by and sleep mode
Capacity
Interface
IDE Transfer Mode
■ Ordering Information
Models
(standard temp.)
FIM128M40VSC1T
FIM256M40VSC1T
FIM512M40VSC1T
FIM001G40VSC1T
FIM002G40VSC1T
FIM004G40VSC1T
FIM128M44VSC1T
FIM256M44VSC1T
FIM512M44VSC1T
FIM001G44VSC1T
FIM002G44VSC1T
FIM004G44VSC1T
Models
IDE
(industrial temp.) interface
FIM128M40VSW1T 40 PIN
FIM256M40VSW1T 40 PIN
FIM512M40VSW1T 40 PIN
FIM001G40VSW1T 40 PIN
FIM002G40VSW1T 40 PIN
FIM004G40VSW1T 40 PIN
FIM128M44VSW1T 44 PIN
FIM256M44VSW1T 44 PIN
FIM512M44VSW1T 44 PIN
FIM001G44VSW1T 44 PIN
FIM002G44VSW1T 44 PIN
FIM004G44VSW1T 44 PIN
Capacity
128MB
256MB
512MB
1GB
2GB
4GB
128MB
256MB
512MB
1GB
2GB
4GB
* All the specifications and photos are subjected to be changed without notice.
www.axiomtek.com
Headquarters
AXIOMTEK Co., Ltd.
Tel: +886-2-2917-4550
Fax: +886-2-2917-3200
E-mail: [email protected]
USA
AXIOMTEK Inc.
Tel: +1-626-581-3232
Fax: +1-626-581-3552
E-mail: [email protected]
Germany
AXIOMTEK DEUTSCHLAND GmbH
Tel: +49-2173-399360
Fax: +49-2173-3993636
E-mail: [email protected]
France
AXIOMTEK S.A.S.
Tel: +33 (0) 146-491-591
Fax: +33 (0) 146-491-590
E-mail: [email protected]
Mainland China
AXIOMTEK Shanghai
Tel: +86-21-5426-0435
Fax: +86-21-5426-0125
E-mail:[email protected]
Similar pages