SUBMINIA TURE FUSES UBMINIATURE No. 370 / TR5 ® IEC 60127-3/III, 250 V V,, F Specifications T ime-Current Packaging Quick Acting (F) Characteristic 000: Tape/Ammopack (1000 pcs.) 041: Short Leads - Bulk (1000 pcs.) Standard Materials IEC 60127-3/III Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V0 Round Pins: Copper, Sn plated Approvals VDE SEMKO cULus Recognized METI CCC Operating TTemperature emperature -40 ºC to +85 ºC (consider de-rating) Climatic Category Features Dimensions (mm) +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration 0,5 min Further infos see: www.wickmanngroup.com Lead Pull Strength Further application infos see Fuseology: Solderability 10 N (EN 60068-2-21) 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) www.wickmanngroup.com/download/ fuseology.pdf Holes in PCB Soldering Heat Resistance 260 ºC, 10 s (IEC 60068-2-20) Long Leads (L=18.8mm) Short Leads (L=4.3mm) Marking , 370, 250 V, F, Current Rating, Approvals Unit Weight Limits for Pre-arcing Time 0.77 g (approx.) 10 ms ... 3 s 3 ms ... 300 ms <20 ms 4 x IN 10 x IN VDE Permissible continuous operating current is ≤ 100 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.5 x IN 10 x IN Current Code Rating Capacity 1.0 x IN max. (mV) max. (mW) max. (A2s) 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A* 0040 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 35 A / 250 V AC 1 50-60 Hz cos ϕ = 1.0 40 A / 250 V AC 50 A / 250 V AC 1 Per UL, approved breaking capacity is 50 A at 250 V. Order Information 050125 Qty. OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] 900 320 350 370 600 550 500 465 400 380 120 120 115 120 110 100 100 85 80 90 80 80 70 100 80 100 120 130 172 165 190 250 250 135 155 200 310 310 360 600 500 660 950 920 1000 1200 0.0002 0.00035 0.0005 0.0014 0.0038 0.0066 0.014 0.03 0.051 0.1 0.025 0.042 0.076 0.12 0.2 0.31 0.53 0.98 1.8 3.1 6.7 12.00 24.00 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] • • • • • • • • • • • • • • • • • • • • • G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • G = Expert Report * Conducting path min. 0.2 mm2 Series 370 Approvals CCC 2.75 x IN < 30 min METI-TMark 2.1 x IN > 1h cURus 1.5 x IN 40 mA ... 6.30 A SEMKO Rated Current VDE 5,08 Stock Conditions W ebLinks 1 +0,1 L max. 8 ∅ 8,5 ∅ 0,6 -40 ºC/+85 ºC/21 days (IEC 60068-1,-2-1,-2-2,-2-78) Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Vibration resistant Halogen free Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE 00 0,0 10 TR5® / No. 370 I-t Characteristics ,00 10 (Min-Max Limit) IEC 60127-3/III 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 I Fault / I Rated Contact WICKMANN for individual I-t curves 050125 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]