Datasheet

MCP MCP ASSEMBLY
F4655-13
High time resolution TOF-MS detector
FEATURES
●Fast time response
●4 µm channel diameter
●Small time jitter
●Compact and lightweight
TMCPF0088
The F4655-13 is an ideal detector for high resolution
TOF-MS (Time of Flight Mass Spectrometry) because
of a two-stage MCP with 4µm channel diameter. Our
own advanced technology in optimizing MCP design
allows obtaining an excellent output waveform with
negligible ringing even when detecting very high
speed signals. The dimensions are exactly the same
as the F4655-10 MCP assembly, ensuring a compact
configuration and easy handling.
Figure 1: Typical Output Waveform
TMCPB0079EC
OUTPUT VOLTAGE (5 mV/div.)
OVERVIEW
FWHM
500 ps
RESPONSE TIME (500 ps/div.)
SPECIFICATIONS
GENERAL
Parameter
MCP Channel Diameter
Bias Angle
Effective Area
Assembly Outer Size
Assembly Height Size
Number of MCPs
Value
4
12
14.5
38
31.9
2
Unit
µm
degree
mm
mm
mm
—
TYPICAL ELECTRICAL CHARACTERISTICS (Supply Voltage: 2 kV, Vacuum: 1.3 × 10-4 Pa, Operating Ambient Temperature: +25 °C)
Parameter
Gain (Min.)
Plate Resistance per MCP
Dark Count (Max.)
Pulse Width (FWHM) (TYP.)
Value
1 × 106
10 to 100
5
500
Unit
—
MΩ
s-1 . cm-2
ps
Value
2.0
0.5
-2.5
1.3 × 10-4 A
Unit
kV
kV
kV
Pa
RATINGS
Parameter
MCP Supply Voltage (Max.)
MCP-OUT to Anode Supply Voltage (Max.)
MCP-IN Supply Voltage (Max.)
Operating Pressure Condition (Max.)
NOTE: A Below 1.3 × 10-4 Pa.
DIMENSIONAL OUTLINES (Unit: mm)
MCP-IN LEAD
3
MCP (2-STAGE)
2- 2.2
PCD* 26
3
SUBSTRATE
0.5
ANODE
38
18
EFFECTIVE
AREA
14.5
30°
30°
6
BNC-R
10.3
MCP-OUT LEAD
3- 3.5
PCD* 32
PROTECTION ELECTRODE
FOR CHARGING-UP
(SAME POTENTIAL AS SUBSTRATE)
3
(13.8)
18.1
* PCD (Pitch Circle Diameter)
TMCPA0044ED
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2008 Hamamatsu Photonics K.K.
WEB SITE www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TMCP1021E05
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected]
NOV. 2008 IP
Similar pages