IHTH-0750IZ-5A Datasheet

IHTH-0750IZ-5A
www.vishay.com
Vishay Dale
High Current Through Hole Inductor,
High Temperature Series
FEATURES
• Shielded construction
• Excellent DC/DC energy storage up to 1 MHz
to 2 MHz
• Filter inductor applications up to SRF (see
“Standard Electrical Specifications” table)
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite
construction
• High Temperature, up to 155 °C
• AEC-Q200 qualified
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
•
•
•
•
Engine and transmission control units
Diesel injection drivers
DC/DC converters for entertainment/navigation systems
Noise suppression for motors
- Windshield wipers
- Power seats
- Power mirrors
- Heating and ventilation blowers
- HID lighting
• LED drivers
STANDARD ELECTRICAL SPECIFICATIONS
L0
INDUCTANCE
± 20 %
AT 100 kHz,
0.25 V, 0 A
(μH)
DCR
TYP.
25 °C
(m)
0.47
0.47
0.52
83.0
44.0
67.00
1.0
0.87
0.92
66.0
44.0
35.70
2.2
1.51
1.63
45.0
38.0
17.85
3.3
2.28
2.40
40.0
33.0
16.70
4.7
2.85
3.00
30.0
26.0
13.22
6.8
3.97
4.18
24.5
22.0
9.50
11.60
HEAT
DCR RATING SATURATION
MAX. CURRENT CURRENT
SRF
25 °C DC TYP.
DC TYP.
TYP.
(A) (3)
(m)
(A) (4)
(MHz)
8.2
5.7
6.14
20.0
14.5
10
7.32
7.70
17.7
13.0
9.77
22
12.56 13.22
12.7
11.5
6.42
33
22.61 23.80
9.5
10.0
4.58
47
35.34 37.20
6.8
6.5
4.28
68
46.47 48.92
6.2
6.2
2.74
82
55.20 58.10
5.2
6.0
3.09
100
60.80 64.00
5.0
5.2
2.63
DIMENSIONS in inches (millimeters)
0.755 ± 0.005
(19.177 ± 0.127)
0.344 ± 0.010
(8.738 ± 0.254)
0.165 ± 0.030
(4.191 ± 0.762)
0.300
(7.620)
Ø “D”
(2 PLCS.)
“B”
C
0.050
(1.270)
C
B
Ø 0.040
(1.016)
no connection
0.277 ± 0.010
(7.036 ± 0.254)
A
33 µH and higher
A
22 µH and lower
A ± 0.010
(± 0.254)
0.47 μH 0.351 (8.915)
1.0 μH 0.487 (12.370)
2.2 μH 0.487 (12.370)
3.3 μH 0.464 (11.786)
4.7 μH 0.464 (11.786)
6.8 μH 0.522 (13.259)
8.2 μH 0.427 (10.846)
10 μH 0.427 (10.846)
22 μH 0.450 (11.430)
33 μH 0.477 (12.116)
47 μH 0.435 (11.049)
68 μH 0.435 (11.049)
82 μH 0.458 (11.633)
100 μH 0.458 (11.633)
VALUE
Notes
(1) All test data is referenced to 25 °C ambient
(2) Operating temperature range -55 °C to +155 °C
(3) DC current (A) that will cause an approximate T of 40 °C
(4) DC current (A) that will cause L to drop approximately 20 %
0
(5) The part temperature (ambient + temp. rise) should not exceed
155 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
B ± 0.010
(± 0.254)
0.244 (6.198)
0.172 (4.369)
0.172 (4.369)
0.179 (4.547)
0.179 (4.547)
0.147 (3.734)
0.245 (6.223)
0.245 (6.223)
0.226 (5.740)
0.197 (5.004)
0.247 (6.274)
0.247 (6.274)
0.227 (5.766)
0.227 (5.766)
C ± 0.010
(± 0.254)
0.160 (4.064)
0.096 (2.438)
0.096 (2.438)
0.111 (2.819)
0.111 (2.819)
0.085 (2.159)
0.082 (2.083)
0.082 (2.083)
0.079 (2.007)
0.080 (2.032)
0.072 (1.829)
0.072 (1.829)
0.070 (1.778)
0.070 (1.778)
D ± 0.005
(± 0.127)
0.079 (2.007)
0.071 (1.803)
0.071 (1.803)
0.063 (1.600)
0.056 (1.422)
0.056 (1.422)
0.050 (1.210)
0.050 (1.210)
0.039 (0.991)
0.035 (0.889)
0.031 (0.787)
0.031 (0.787)
0.028 (0.711)
0.028 (0.711)
DESCRIPTION
IHTH-0750IZ-5A
MODEL
1.0 μH
INDUCTANCE VALUE
± 20 %
INDUCTANCE TOLERANCE
GLOBAL PART NUMBER
I
H
T
MODEL
Revision: 15-Feb-16
H
0
7
5
0
SIZE
I
Z
E
B
PACKAGE
CODE
1
R
INDUCTANCE
VALUE
0
M
INDUCT.
TOL.
5
A
SERIES
Document Number: 34348
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHTH-0750IZ-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS
IHTH0750IZ-5A 0.47 µH
100
IHTH0750IZ-5A 1.0 µH
1.25
0.30
60
0.20
40
0.10
20
0
0.00
90
0.75
60
0.50
40
0.25
20
0
0.00
120
0
25
DC CURRENT (A)
75
100
IHTH0750IZ-5A 3.3 µH
5.0
L
1.5
60
1.0
40
0.5
20
INDUCTANCE (μH)
80
2.0
0
0.0
10
20
30
40
50
60
80
4.0
L
3.0
60
2.0
40
1.0
20
0
0.0
70
0
20
DC CURRENT (A)
3.0
60
2.0
40
1.0
20
INDUCTANCE (μH)
80
ΔT °C
0
0.0
0
10
20
30
40
6
60
4
40
2
20
0
0
0
10
20
100
IHTH0750IZ-5A 10 µH
15
60
4
40
2
20
0
0
20
DC CURRENT (A)
Revision: 15-Feb-16
25
30
INDUCTANCE (μH)
6
TEMPERATURE (°C)
INDUCTANCE (μH)
80
L
15
40
100
ΔT °C
8
10
30
DC CURRENT (A)
ΔT °C
5
80
L
50
IHTH0750IZ-5A 8.2 µH
0
100
ΔT °C
8
DC CURRENT (A)
10
60
IHTH0750IZ-5A 6.8 µH
10
TEMPERATURE (°C)
INDUCTANCE (μH)
100
L
4.0
40
DC CURRENT (A)
IHTH0750IZ-5A 4.7 µH
5.0
100
ΔT °C
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
0
100
DC CURRENT (A)
IHTH0750IZ-5A 2.2 µH
2.5
50
TEMPERATURE (°C)
60
L
TEMPERATURE (°C)
30
80
1.00
TEMPERATURE (°C)
L
INDUCTANCE (μH)
80
0.40
0
100
ΔT °C
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
12
80
L
9
60
6
40
3
20
TEMPERATURE (°C)
0.50
0
0
0
5
10
15
20
25
30
DC CURRENT (A)
Document Number: 34348
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHTH-0750IZ-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS
IHTH0750IZ-5A 22 µH
100
IHTH0750IZ-5A 33 µH
40
100
L
15
60
10
40
5
20
0
0
5
10
15
L
24
60
16
40
8
20
0
0
20
0
5
DC CURRENT (A)
100
IHTH0750IZ-5A 68 µH
75
60
30
40
15
20
INDUCTANCE (μH)
45
TEMPERATURE (°C)
INDUCTANCE (μH)
80
ΔT °C
L
0
0
0
3
6
9
60
80
45
60
30
40
15
20
0
0
12
0
3
DC CURRENT (A)
5
100
60
40
40
20
20
0
0
6
DC CURRENT (A)
Revision: 15-Feb-16
8
INDUCTANCE (μH)
60
TEMPERATURE (°C)
INDUCTANCE (μH)
80
L
4
100
ΔT °C
80
2
10
IHTH0750IZ-5A 100 µH
125
ΔT °C
0
8
DC CURRENT (A)
IHTH0750IZ-5A 82 µH
100
100
ΔT °C
L
60
15
DC CURRENT (A)
IHTH0750IZ-5A 47 µH
75
10
TEMPERATURE (°C)
0
80
32
TEMPERATURE (°C)
80
20
INDUCTANCE (μH)
ΔT °C
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
80
100
L
75
60
50
40
25
20
TEMPERATURE (°C)
25
0
0
0
2
4
6
8
DC CURRENT (A)
Document Number: 34348
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHTH-0750IZ-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY
L
Q
75
0.5
50
0.25
25
1
10
L
3
120
2
80
1
40
0
0.1
100
1
FREQUENCY (MHz)
8
120
4
60
0
INDUCTANCE (μH)
180
Q
INDUCTANCE (μH)
240
L
12
1
10
24
160
18
12
80
6
40
100
0
0.1
1
100
10
50
0
INDUCTANCE (μH)
L
Q
INDUCTANCE (μH)
150
1
10
60
120
L
Q
40
80
20
40
0
0.1
100
1
FREQUENCY (MHz)
120
2
80
1
40
0
0
1
10
FREQUENCY (MHz)
Revision: 15-Feb-16
100
100
80
60
L
Q
60
Q
L
3
INDUCTANCE (μH)
160
Q
0.1
100
IHTH0750IZ-5A 10 µH
80
200
Q
INDUCTANCE (μH)
4
10
FREQUENCY (MHz)
IHTH0750IZ-5A 8.2 µH
5
160
0
0
0.1
100
IHTH0750IZ-5A 6.8 µH
80
200
30
Q
10
FREQUENCY (MHz)
IHTH0750IZ-5A 4.7 µH
20
120
L
Q
FREQUENCY (MHz)
40
200
0
0
0.1
IHTH0750IZ-5A 3.3 µH
30
300
Q
16
100
FREQUENCY (MHz)
IHTH0750IZ-5A 2.2 µH
20
10
Q
0.1
160
Q
0
0
0
4
200
Q
0.75
INDUCTANCE (μH)
100
1
Q
INDUCTANCE (μH)
125
1.25
IHTH0750IZ-5A 1.0 µH
5
150
Q
IHTH0750IZ-5A 0.47 µH
1.5
40
40
20
20
0
0
0.1
1
10
100
FREQUENCY (MHz)
Document Number: 34348
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHTH-0750IZ-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY
L
100
60
50
30
0
INDUCTANCE (μH)
90
Q
Q
1
300
90
L
Q
200
100
30
0
0.1
10
1
FREQUENCY (MHz)
50
100
25
0
10
L
300
60
200
40
100
20
0
0.1
100
1
FREQUENCY (MHz)
200
25
0
0
0.1
1
FREQUENCY (MHz)
Revision: 15-Feb-16
10
INDUCTANCE (μH)
50
Q
INDUCTANCE (μH)
75
Q
L
IHTH0750IZ-5A 100 µH
800
100
600
400
10
FREQUENCY (MHz)
IHTH0750IZ-5A 82 µH
800
80
Q
0
0
1
400
100
Q
200
INDUCTANCE (μH)
L
Q
INDUCTANCE (μH)
75
Q
IHTH0750IZ-5A 68 µH
500
100
300
0.1
10
FREQUENCY (MHz)
IHTH0750IZ-5A 47 µH
400
60
0
0
0.1
120
100
600
75
Q
L
400
50
200
25
0
Q
INDUCTANCE (μH)
150
IHTH0750IZ-5A 33 µH
400
120
Q
IHTH0750IZ-5A 22 µH
200
0
0.1
1
10
FREQUENCY (MHz)
Document Number: 34348
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000