Data Sheet

PCMFxUSB3S series
Common-mode EMI filter for differential channels with
integrated ESD protection
Rev. 2 — 7 March 2016
Product data sheet
1. Product profile
1.1 General description
Common-mode ElectroMagnetic Interference (EMI) filters with integrated ElectroStatic
Discharge (ESD) protection for one, two and three differential channels. The devices are
designed to provide low insertion loss for differential high-speed signals on each channel
while unwanted common-mode signals are attenuated.
Each differential channel incorporates two signal lines that are coupled by integrated coils.
Diodes provide protection to downstream components from ESD voltages up to ±15 kV on
each signal line.
Table 1.
Product overview
Type number
Number of channels
Package Name
PCMF1USB3S
1
WLCSP5
PCMF2USB3S
2
WLCSP10
PCMF3USB3S
3
WLCSP15
1.2 Features and benefits
 One, two and three differential channels common-mode EMI filters with integrated
ESD protection
 ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2
 Superior common-mode suppression over a wide frequency range
 Superior RF performance compared to other integrated filters or discrete filters with
external ESD protection
 Extremely high symmetry between line pairs
 Industry-standard Wafer Level Chip Scale Packages: WLCSP5, 10 and 15 for smaller
footprint
1.3 Applications




Smartphone, cellular and cordless phone
Tablet PC and Mobile Internet Device (MID)
USB 3.1, USB 2.0, HDMI 2.0, HDMI 1.4
MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial
Interface (DSI)
 General-purpose EMI and Radio-Frequency Interference (RFI) filter and downstream
ESD protection
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
2. Pinning information
Table 2.
Pin
Pinning
Symbol
Description
Simplified outline
Graphic symbol
PCMF1USB3S (WLCSP5_2-1-2)
A1
CH1_IN+
channel 1+, external
A2
CH1_IN
channel 1, external
B1
GND_CH1
ground channel 1
C1
CH1_OUT+
channel 1+, internal
C2
CH1_OUT
channel 1, internal
2
A1
C1
A2
C2
B1
1
A
B
C
Transparent top view
WLCSP5_2-1-2
B1
aaa-019784
PCMF2USB3S (WLCSP10_4-2-4)
A1
CH1_IN+
channel 1+, external
A2
CH1_IN
channel 1, external
A3
CH2_IN+
channel 2+, external
A4
CH2_IN
channel 2, external
B1
GND_CH1
ground channel 1
B2
GND_CH2
ground channel 2
C1
CH1_OUT+
channel 1+, internal
C2
CH1_OUT
channel 1, internal
C3
CH2_OUT+
channel 2+, internal
C4
CH2_OUT
channel 2, internal
4
A1, 3
C1, 3
A2, 4
C2, 4
B2
3
2
B1
1
B1, B2 - no internal connection
A
B
aaa-019785
C
Transparent top view
WLCSP10_4-2-4
PCMF3USB3S (WLCSP15_6-3-6)
A1
CH1_IN+
channel 1+, external
A2
CH1_IN
channel 1, external
A3
CH2_IN+
channel 2+, external
A4
CH2_IN
channel 2, external
A5
CH3_IN+
channel 3+, external
A6
CH3_IN
channel 3, external
B1
GND_CH1
ground channel 1
B2
GND_CH2
ground channel 2
B3
GND_CH3
ground channel 3
C1
CH1_OUT+
channel 1+, internal
C2
CH1_OUT
channel 1, internal
C3
CH2_OUT+
channel 2+, internal
C4
CH2_OUT
channel 2, internal
C5
CH3_OUT+
channel 3+, internal
C6
CH3_OUT
channel 3, internal
PCMFXUSB3S_SER
Product data sheet
6
A1, 3, 5
C1, 3, 5
A2, 4, 6
C2, 4, 6
B3
5
4
B2
3
B1, B2, B3 - no internal connection
aaa-019786
2
B1
1
A
B
C
Transparent top view
WLCSP15_6-3-6
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
2 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
PCMF1USB3S
WLCSP5
wafer level chip-size package; 5 bumps (2-1-2)
PCMF1USB3S
PCMF2USB3S
WLCSP10 wafer level chip-size package; 10 bumps (4-2-4)
PCMF2USB3S
PCMF3USB3S
WLCSP15 wafer level chip-size package; 15 bumps (6-3-6)
PCMF3USB3S
4. Marking
Table 4.
Marking codes
Type number
Marking code
PCMF1USB3S
PF1S
PCMF2USB3S
PF2S
PCMF3USB3S
PF3S
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VI
input voltage
VESD
electrostatic discharge
voltage
Min
Max
Unit
0.5
5
V
contact discharge
15
15
kV
air discharge
15
15
kV
contact discharge
2
2
kV
air discharge
2
2
kV
7
7
A
IEC 61000-4-2, level 4;
all input pins to ground
IEC 61000-4-2, level 4;
all output pins to ground
PCMFXUSB3S_SER
Product data sheet
tp = 8/20 s
IPPM
rated peak pulse
current
Tstg
storage temperature
40
+125
C
Tamb
ambient temperature
40
+85
C
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
3 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
6. Characteristics
6.1 Channel characteristics
Table 6.
Channel characteristics
Tamb = 25 C unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
-
3
-

-
0.25
-
pF
Rs(ch)
channel series resistance single line; input to output
Cd
diode capacitance
f = 1 MHz; VI = 2.5 V
IRM
reverse leakage current
per line; VI = 5 V
-
-
100
nA
VBR
breakdown voltage
IR = 1 mA
6
9
-
V
VF
forward voltage
IF = 10 mA
-
0.8
-
V
Rdyn
dynamic resistance
TLP
-
0.14
-

-
0.14
-

positive transient
-
0.22
-

negative transient
-
0.22
-

Min
Typ
Max
Unit
-
12
-
dB
f = 2.6 GHz
-
38
-
dB
f = 5 GHz
-
18
-
dB
[1]
-
0.3
-
dB
[1]
-
6
-
GHz
[1]
[2]
positive transient
negative transient
surge
[3]
[1]
This parameter is guaranteed by design.
[2]
100 ns Transmission Line Pulse (TLP); 50 W; pulser at 70 ns to 90 ns.
[3]
According to IEC 61000-4-5 (8/20 ms).
6.2 Frequency characteristics
Table 7.
Frequency characteristics
Symbol Parameter
Conditions
Common mode: S21cc
il
[1]
insertion loss
f = 800 MHz
Differential mode: S21dd
il
insertion loss
f3dB
[1]
PCMFXUSB3S_SER
Product data sheet
f = 1 MHz
cut-off frequency
Normalized to attenuation at 1 MHz.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
4 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
aaa-019777
0
aaa-019778
0
Scc21
(dB)
Sdd21
(dB)
-10
-2
-20
S21dd pin 1 - 2
-4
S21cc pin 1 - 2
S21dd pin 5 - 6
S21cc pin 5 - 6
-30
-6
-40
-8
107
108
109
-50
107
1010
108
109
f (Hz)
Fig 1.
Differential-mode insertion loss; typical values
aaa-021982
0
1010
f (Hz)
Fig 2.
Common-mode insertion loss; typical values
aaa-019779
115
Sdd21
(db)
Zdif
(Ω)
-20
Mag S21dd A3 - A4 > C1 - C2
105
Mag S21dd A5 - A6 > C1 - C2
-40
Z reference
Z DUT
95
-60
-80
107
108
109
1010
85
40.4
1011
40.6
f (Hz)
40.8
41.0
41.2
t (ns)
tr = 200 ps
Fig 3.
Differential crosstalk; typical values
PCMFXUSB3S_SER
Product data sheet
Fig 4.
Differential Time Domain Reflectometer (TDR)
plot; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
5 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Data rate: 10 Gbit/s
Vertical scale: 173 mV/div
Horizontal scale: 20 ps/div
Fig 5.
USB 3.1 eye diagram, test board with PCMF2USB3S; typical values
Data rate: 10 Gbit/s
Vertical scale: 180 mV/div
Horizontal scale: 20 ps/div
Fig 6.
PCMFXUSB3S_SER
Product data sheet
USB 3.1 eye diagram, test board without device; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
6 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Data rate: 5 Gbit/s
Vertical scale: 169 mV/div
Horizontal scale: 40 ps/div
Fig 7.
USB 3.1 eye diagram, test board with PCMF2USB3S; typical values
Data rate: 5 Gbit/s
Vertical scale: 179 mV/div
Horizontal scale: 40 ps/div
Fig 8.
PCMFXUSB3S_SER
Product data sheet
USB 3.1 eye diagram, test board without device; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
7 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Test frequency: 148.5 MHz
Differential swing voltage: 861 mV
Horizontal scale: 34 ps/div
Fig 9.
HDMI 2.0 eye diagram TP1, test board with PCMF2USB3S; typical values
Test frequency: 148.5 MHz
Differential swing voltage: 917 mV
Horizontal scale: 34 ps/div
Fig 10. HDMI 2.0 eye diagram TP1, test board without device; typical values
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
8 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Test frequency: 148.5 MHz
Differential swing voltage: 849 mV
Horizontal scale: 34 ps/div
Remark: Measured at Test Point 2 (TP2) worst cable emulator, reference cable equalizer and
worst case positive skew.
Fig 11. HDMI 2.0 eye diagram TP2, test board with PCMF2USB3S; typical values
Test frequency: 148.5 MHz
Differential swing voltage: 909 mV
Horizontal scale: 34 ps/div
Remark: Measured at Test Point 2 (TP2) worst cable emulator, reference cable equalizer and
worst case positive skew.
Fig 12. HDMI 2.0 eye diagram TP2, test board without device; typical values
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
9 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Vertical scale: 145 mV/div
Horizontal scale: 15.6 ns/div
Fig 13. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board with
PCMF2USB3S; typical values
Vertical scale: 146 mV/div
Horizontal scale: 15.6 ns/div
Fig 14. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board without
device; typical values
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
10 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Vertical scale: 145 mV/div
Horizontal scale: 15.6 ns/div
Fig 15. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board with
PCMF2USB3S; typical values
Vertical scale: 146 mV/div
Horizontal scale: 15.6 ns/div
Fig 16. MIPI M-PHY PWM-TX transmitter eye opening at 140 mV, test board without
device; typical values
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
11 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
aaa-019781
25
aaa-019782
0
I
(A)
I
(A)
20
-5
15
-10
10
-15
5
-20
0
0
5
10
15
20
25
-25
-25
-20
-15
-10
-5
VCL (V)
0
VCL (V)
Transmission Line Pulse (TLP) = 100 ns;
Transmission Line Pulse (TLP) = 100 ns;
tr = 1 ns
tr = 1 ns
Fig 17. Dynamic resistance with positive clamping;
typical values
Fig 18. Dynamic resistance with negative clamping;
typical values
aaa-021984
25
aaa-021983
0
I
(A)
I
(A)
20
-5
15
-10
10
-15
5
-20
0
0
5
10
15
20
25
-25
-25
-20
VCL (V)
-15
-10
-5
0
VCL (V)
Very-Fast Transmission Line Pulse (VF-TLP) = 5 ns;
tr = 600 ps
Fig 19. Dynamic resistance with positive clamping;
typical values
Very-Fast Transmission Line Pulse (VF-TLP) = 5 ns;
tr = 600 ps
Fig 20. Dynamic resistance with negative clamping;
typical values
The device uses an advanced clamping structure showing a negative dynamic resistance.
This snapback behavior strongly reduces the clamping voltage to the system behind the
ESD protection during an ESD event. Do not connect unlimited DC current sources to the
data lines to avoid keeping the ESD protection device in snapback state after exceeding
breakdown voltage (due to an ESD pulse for instance).
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
12 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
aaa-022150
10
aaa-022151
0
I
(A)
I
(A)
8
-2
6
-4
4
-6
2
-8
0
0
2
4
6
8
10
-10
-10
-8
-6
-4
-2
VCL (V)
According to IEC 61000-4-5 (8/20 s)
According to IEC 61000-4-5 (8/20 s)
Fig 21. Dynamic resistance with positive clamping;
typical values
PCMFXUSB3S_SER
Product data sheet
0
VCL (V)
Fig 22. Dynamic resistance with negative clamping;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
13 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
7. Application information
The device is designed to provide high-level ESD protection and common-mode filtering
for differential high-speed data line pairs such as:
•
•
•
•
•
•
USB 3.1
HDMI 2.0
Transition-Minimized Differential Signaling (TMDS)
DisplayPort
external Serial Advanced Technology Attachment (eSATA)
Low Voltage Differential Signaling (LVDS)
When designing the PCB, give careful consideration to impedance matching and signal
coupling. Do not connect the protected signal lines to unlimited current sources like, for
example, a battery.
Fig 23. Application diagram: protecting and filtering the differential data lines of a USB
Type-C connector evaluation dongle with PCMF1USB3S
Since the SuperSpeed TX/RX lines are separated by GND or VBUS from the Hi-Speed
lines, PCMF1USB3S makes it easy to achieve same signal lengths, straight routing, and
optimal positioning for ESD protection directly at the connector.
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
14 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
8. Package outline
WLCSP5: wafer level chip-size package; 5 bumps (2-1-2)
PCMF1USB3S
D
bump A1
index area
A1
E
A
detail X
e
1/2 e
b
C
e1
B1
B
e2
A
bump A1
index area
1
2
X
0
1 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
A
A1
b
D
E
e
e1
e2
max 0.60 0.38 0.31 0.82 1.22
nom 0.57 0.37 0.26 0.77 1.17 0.40 0.40 0.80
min 0.54 0.36 0.21 0.72 1.12
pcmf1usb3s_po
Outline
version
References
IEC
JEDEC
JEITA
European
projection
Issue date
15-09-09
15-09-14
PCMF1USB3S
Fig 24. Package outline WLCSP5
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
15 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
WLCSP10: wafer level chip-size package; 10 bumps (4-2-4)
PCMF2USB3S
D
bump A1
index area
A1
E
A
detail X
e
b
C
e1
B1
B
B2
e2
A
bump A1
index area
1
2
3
4
e3
X
1/2 e
0
1 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
A
A1
b
D
E
e
e1
e2
max 0.60 0.38 0.31 1.62 1.22
nom 0.57 0.37 0.26 1.57 1.17 0.40 0.40 0.80
min 0.54 0.36 0.21 1.52 1.12
e3
0.80
pcmf2usb3s_po
Outline
version
References
IEC
JEDEC
JEITA
European
projection
Issue date
15-09-09
15-09-14
PCMF2USB3S
Fig 25. Package outline WLCSP10
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
16 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
WLCSP15: wafer level chip-size package; 15 bumps (6-3-6)
PCMF3USB3S
D
bump A1
index area
A1
E
A
detail X
e
1/2 e
b
C
e1
B2
B1
B
B3
e2
A
1
bump A1
index area
2
3
4
5
6
e3
X
0
1 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
A
A1
b
D
E
e
e1
e2
e3
max 0.60 0.38 0.31 2.42 1.22
nom 0.57 0.37 0.26 2.37 1.17 0.40 0.40 0.80 0.80
min 0.54 0.36 0.21 2.32 1.12
pcmf3usb3s_po
Outline
version
References
IEC
JEDEC
JEITA
European
projection
Issue date
15-09-09
15-09-14
PCMF3USB3S
Fig 26. Package outline WLCSP15
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
17 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
9. Soldering
WLCSP5: Solder footprint and stencil aperture
PCMF1USB3S
Hx
P
see
detail X
P
solder land (SL)
Hy
solder paste deposit (SP)
solder land plus solder paste
SL = SP
solder resist opening (SR)
SR
occupied area
detail X
Dimensions in mm
recommend stencil thickness: 0.1 mm
P
SL
SP
SR
Hx
Hy
15-09-09
15-09-14
0.40 0.25 0.25 0.325 1.00 1.40
pcmf1usb3s_fr
Fig 27. Soldering footprint WLCSP5 (PCMF1USB3S)
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
18 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
WLCSP10: Solder footprint and stencil aperture
PCMF2USB3S
Hx
P
see
detail X
P
solder land (SL)
Hy
solder paste deposit (SP)
solder land plus solder paste
SL = SP
solder resist opening (SR)
SR
occupied area
P1
Dimensions in mm
detail X
recommend stencil thickness: 0.1 mm
P
P1
SL
SP
SR
Hx
Hy
15-09-09
15-09-14
0.40 0.80 0.25 0.25 0.325 1.80 1.40
pcmf2usb3s_fr
Fig 28. Soldering footprint WLCSP10 (PCMF2USB3S)
WLCSP15: Solder footprint and stencil aperture
PCMF3USB3S
Hx
P
see
detail X
P
solder land (SL)
Hy
solder paste deposit (SP)
solder land plus solder paste
SL = SP
solder resist opening (SR)
SR
occupied area
P1
detail X
Dimensions in mm
recommend stencil thickness: 0.1 mm
P
P1
SL
SP
SR
Hx
Hy
15-09-09
15-09-14
0.40 0.80 0.25 0.25 0.325 2.60 1.40
pcmf3usb3s_fr
Fig 29. Soldering footprint WLCSP15 (PCMF3USB3S)
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
19 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
10. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PCMFXUSB3S_SER v.2
20160307
Product data sheet
-
PCMFXUSB3S_SER v.1
-
-
Modifications:
PCMFXUSB3S_SER v.1
PCMFXUSB3S_SER
Product data sheet
• Product status changed
20151007
Preliminary data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
20 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
11. Legal information
11.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
11.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
PCMFXUSB3S_SER
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
21 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
11.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
PCMFXUSB3S_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 7 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
22 of 23
PCMFxUSB3S series
NXP Semiconductors
Common-mode EMI filter for differential channels with ESD protection
13. Contents
1
1.1
1.2
1.3
2
3
4
5
6
6.1
6.2
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 3
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Channel characteristics . . . . . . . . . . . . . . . . . . 4
Frequency characteristics. . . . . . . . . . . . . . . . . 4
Application information. . . . . . . . . . . . . . . . . . 14
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 15
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 20
Legal information. . . . . . . . . . . . . . . . . . . . . . . 21
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 21
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Contact information. . . . . . . . . . . . . . . . . . . . . 22
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP Semiconductors N.V. 2016.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 7 March 2016
Document identifier: PCMFXUSB3S_SER
Similar pages