ILSB-1206 Datasheet

ILSB-1206
www.vishay.com
Vishay Dale
Monolithic Chip Inductors
FEATURES
•
•
•
•
High reliability
Surface mountable
Magnetically self shielded
Nickel barrier plating virtuallly eliminates silver
migration
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
MECHANICAL SPECIFICATIONS
Solderability: 90 % coverage after 5 s dip in 235 °C solder
following 60 s preheat at 120 °C to 150 °C and type R flux dip
Resistance to Solder Heat: 10 s in 260 °C solder, after
preheat and flux per above
Termination: 100 % Sn
Terminal Strength: 0.1 kg for 30 s
Beam Strength: 2.5 kg
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: -55 °C to +125 °C
Thermal Shock: -40 °C to +85 °C
Humidity: 90 % RH at 40 °C, 1000 h at full rated current
Load Life: 85 °C for 1000 h at full rated current
STANDARD ELECTRICAL SPECIFICATIONS
INDUCTANCE
(μH)
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.68
1.0
1.2
1.5
1.8
2.2
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
TEST FREQ.
(MHz)
L AND Q
50
50
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
4
4
4
2
2
1
1
1
1
1
THICKNESS “D”
(INCHES [mm])
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
0.043 ± 0.012 [1.10 ± 0.3]
TOL.
20 %
20 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
10 %
Q
MIN.
20
20
20
20
20
20
20
20
20
25
25
25
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
35
35
35
SRF
MIN.
(MHz)
368
322
271
253
230
213
196
173
167
156
144
121
87
75
69
64
58
48
44
41
37
34
30
28
26
22
21
19
17
15
DCR
MAX.
()
0.15
0.25
0.25
0.30
0.30
0.40
0.40
0.50
0.60
0.50
0.60
0.80
0.40
0.50
0.50
0.50
0.50
0.70
0.80
0.90
0.70
0.80
0.90
1.00
1.05
0.70
0.70
0.90
0.90
1.05
RATED
DC CURRENT
(mA)
300
300
250
250
250
250
250
250
250
200
200
150
100
100
50
50
50
50
50
50
25
25
25
25
15
5
5
5
5
5
DESCRIPTION
ILSB-1206
MODEL
3.3 μH
INDUCTANCE VALUE
± 10 %
INDUCTANCE TOLERANCE
ER
PACKAGE CODE
e3
JEDEC® LEAD (Pb)-FREE STANDARD
E
3
GLOBAL PART NUMBER
I
L
S
PRODUCT FAMILY
Revision: 10-Jun-15
B
1
2
0
SIZE
6
R
PACKAGE
CODE
R
INDUCTANCE
VALUE
3
K
TOL.
Document Number: 34029
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILSB-1206
www.vishay.com
Vishay Dale
DIMENSIONS in inches [millimeters]
100 % Sn Termination
B
G
A
F
Ferrite Body
H
D
E
C
Suggested Pad Layout
Dimensional Outline
A
B
C
D
E
F
G
H
0.126 ± 0.008
[3.2 ± 0.2]
0.063 ± 0.008
[1.6 ± 0.2]
0.020 ± 0.012
[0.5 ± 0.3]
0.043 ± 0.012
[1.10 ± 0.3]
0.185
[4.7]
0.070
[1.8]
0.087
[2.2]
0.047
[1.2]
TAPE AND REEL SPECIFICATIONS 1206 SIE PER EIA-481-1 in inches [millimeters]
T
P2
P0
E1
Ø D0
F
W
B0
Ø D1
A0
K0
P1
ØN
ØC
T1
A0
0.073 ± 0.004 [1.85 ± 0.1]
B0
0.135 ± 0.004 [3.43 ± 0.1]
D0
0.059 + 0.005/- 0.000 [1.5 + 0.127]
D1
0.039 min. [1.0 min.]
E1
0.069 ± 0.004 [1.75 ± 0.1]
F
0.138 ± 0.002 [3.50 ± 0.05]
K0
0.048 ± 0.002 [1.22 ± 0.05]
P0
0.157 ± 0.004 [4.00 ± 0.1]
P1
0.157 ± 0.004 [4.00 ± 0.1]
P2
0.079 ± 0.002 [2.00 ± 0.05]
W
0.327 max. [8.3 max.]
T
0.008 ± 0.002 [0.2 ± 0.05]
A
7.000 ± 0.079 [178 ± 2.0]
N
2.500 [63.5]
C
0.512 ± 0.020 [13.00 ± 0.50]
ØA
W
1
Empty Trailer
Components
Empty Tape
Cover Tape Leader
Unreel
Direction
160 mm Minimum
160 mm Minimum
Revision: 10-Jun-15
390 mm Minimum
W1
0.315 + 0.059/- 0.000 [8.00 + 1.5]
T1
0.079 ± 0.002 [2.00 ± 0.05]
Document Number: 34029
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000