1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES A ENVIRONMENTAL OPERATING TEMPERATURE: -25°C UP TO +85°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING: 2 A WORKING VOLTAGE: 125 VAC CONTACT RESISTANCE: 20 mOHM MAX WIRE DIMENSION AWG: AWG 24 - 28 PACKAGING 10KPCS REEL B C RoHS Compliant PROJECTION: N M GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 L K J APPROVAL: BBu I UNIT: MM DESCRIPTION: 2.00 MM FEMALE CRIMP TERMINAL SIZE WERI PART NO: 620 001 137 22 A4 SCALE: H 03-AUG-15 UPDATE AK SHEET: 1/3 REV DATE FILE BY DRAW: AK D 1 2 3 4 5 A B Note : 1. All dimensions meet EIA-481-3 requirements. 2.Material : WH Conductive polystyrene Alloy. 3.Thickness : 0.50±0.05mm. 4.Component load per reel : 10.000 pcs. 5.Reel size : diameters 160*25, T=14. 6.Reel chipboard size : diameters 600*25, T=14. 7.Bag size : 900*900*0.06. 8.Carton size : 615*615*340. Q'tY/Reel Reel/Carton Q'tY/Carton 10Kpcs 12 C 120Kpcs RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: B A REV UNIT: MM DESCRIPTION: 2.00 MM FEMALE CRIMP TERMINAL SIZE WERI PART NO: 620 001 137 22 A4 SCALE: SHEET: 2/3 DATE FILE BY DRAW: MIKE D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D