download 465031712505.pdf

SPECIFICATION
5,08
2,54
1,2
>Rating:
P.C.B MOUNTINGPLAN
>Contact Resistance :
Initial :
After Life Test :
>Insulation Resistance :
>Dielectric Strength :
>Total-Travel :
>Bounce :
>Switch function :
>Actuator function :
5,08
1
2
3
2,54
EPOXY SEAL
3
4,4
1,6
1,4
4,5
>Bracket :
>Cover :
>Actuator :
>Contact :
>Terminal :
>Spring :
1,4
7,0
4,7
10,7
1,5
8,6
50mΩ max.
500mΩ max.
min. 500MΩ at 500VDC
500VAC for 1 minute
1.1 ±0.2 mm
10 ms
momentary
Auto-return
MATERIAL
2,4 2,8
5,4
,4
O1
Copper Alloy with Tin
PA46 UL 94 V-0, color White
PA46 UL 94 V-0, color White
Copper Alloy with Silver
Copper Alloy with Gold
Steel
1,2
1,2
6,40
SOLDERING INFORMATION
5,9
7,0
9,8
2
2,5
1
5,0
3,3
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~28V)
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3sec. max
SCHEMATIC
h 0,1 ref.
2 (COM)
1
ENVIRONMENTAL
Storage condition :
Operation condition :
Compliance :
3
-40°C ~ +85°C
-40°C ~ +85°C
ROHS, Reach
PACKAGING INFORMATION
( non-shorting)
0,30
1,0
O 2,8
> Tape & Reel
Part number
Force
Switching function
Schematic
Life Cycle
465 031 712 505
250g ± 100g
ON - ON
SPDT
30.000
6,0
Scale - 2:1
Würth Elektronik eiSos GmbH & Co. KG
EMC & Innductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
com. +49 79 42 945 - 0
b
a
REV.
Spring: Carbon Steel; Switsching function
Contact: Copper Alloy with Silver; Schematic
FILE
2015-03-23
2015-03-17
DATE
DaF
DaF
BY
www.we-online.de
[email protected]
CREATED
CHECKED
DaF
JLi
GENERAL TOLERANCE
TECHNICAL REFERENCE
WS-PBSU
Push Button Switch,
Side push type, SMT version
9.8*18.5*5.9mm
A4
DIN ISO 2768-1m
DESCRIPTION
SIZE
SIZE
PROJECTION
METHOD
STATUS
Released
_________
ORDER CODE
465031712505
DATE
2015-02-09
BUSINESS UNIT
SWITCH
PAGE
1 /1
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Similar pages