SPECIFICATION 5,08 >Rating : 2,54 0,6 2 >Contact Resistance : Initial : After Life Test : >Insulation Resistance : >Dielectric Strength : >Total-Travel : >Bounce : >Switch function : >Actuator function : P.C.B. MOUNTINGPLAN 3 2,54 EPOXY SEAL 1 O0 ,8 3,3 2 3 5,08 1 x5 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~28V) 50mΩ max. 500mΩ max. min. 500MΩ at 500VDC 500VAC for 1 minute 1.1 ±0.2mm 10 ms momentary Auto-return 5,4 MATERIAL 5,08 9,38 8,6 0,7 4,5 >Bracket : >Cover : >Actuator : >Contact : >Terminal : >Spring : 0,4 SCHEMATIC 5,08 SOLDERING INFORMATION 5,9 3,1 >Terminal in THT version >Wave soldering 260°C 10sec. max >Hand soldering under 350°C for 3sec. max 2 (COM) 0,3 7,0 9,8 Copper Alloy with Tin PA66 UL 94 V-0, color Black POM UL HB, color White Copper Alloy with Silver Copper Alloy with Gold Steel 1 ENVIRONMENTAL 3 Storage condition : Operation condition : Compliance : 6,0 5,0 (non-shorting) -40°C ~ +85°C -40°C ~ +85°C ROHS, Reach O 2,8 PACKAGING INFORMATION > Tray 0,3 Part number Force Switching function Schematic Life Cycle 465 031 772 505 250g ± 100g ON - ON SPDT 30.000 0,7 Scale - 2:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Innductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 b a REV. Spring: Carbon Steel; Switching function Contact: Copper Alloy with Silver; Schematic FILE 2015-03-23 2015-03-17 DATE DaF DaF BY www.we-online.de [email protected] CREATED CHECKED DaF JLi GENERAL TOLERANCE TECHNICAL REFERENCE WS-PBTU Push Button Switch, Right angle type, THT version 9.8*18.5*5.9mm A4 DIN ISO 2768-1m DESCRIPTION SIZE SIZE PROJECTION METHOD STATUS Released _________ ORDER CODE 465031772505 DATE 2015-02-09 BUSINESS UNIT SWITCH PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.