1 2 3 4 5 TECHNICAL CHARACTERISTICS A MATERIAL INSULATOR: NYLON 66 FLAMABILITY RATING: UL94-V0 COLOR: WHITE CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN OVER NICKEL QUALITY CLASS: 25 MATING CYCLES PITCH: 4.20 MM ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 105°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING: 6 TO 9 A NB CIRCUITS AMPERES 2-3 9 4-6 8 7-10 7 12-24 6 B WORKING VOLTAGE: 600 VAC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 1500 VAC/MN CONTACT RESISTANCE: 10 mΩ MAX STANDARD CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE WAVE SOLDERING PROCESS LAST CKT. PACKAGING TRAY DIMENSION A = 4.20 x (NB. PIN / 2 - 1) B = 4.20 x (NB. PIN / 2) + 1.30 C CKT.#1 CKT.#2 RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 UNIT: MM J 01-JUL-15 PINNING AK I 25-SEP-14 DRAWING AS SCALE: H 08-SEP-14 CONTACT R. AS SHEET: 1/3 REV DATE FILE BY DRAW: AS APPROVAL: BBu DESCRIPTION: 4.20MM MALE DUAL ROW VERTICAL HEADER SIZE WERI PART NO: 649 0xx 211 22 A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B DESCRIPTION: 4.20MM MALE DUAL ROW VERTICAL HEADER SIZE WERI PART NO: 649 0xx 211 22 A4 SCALE: A REV UNIT: MM SHEET: 2/3 DATE FILE BY DRAW: PEARL D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D