Featured Products Broad Lineup AC/DC Converter ICs BM2Pxxx Series Built-In 650V Super Junction MOSFET AC/DC Converter ICs Adopting a Super Junction MOSFET provides a number of advantages Efficiency Comparison (25W Adapter) ROHM adopted a high-performance Super Junction MOSFET for ultra-high efficiency, enabling compatibility with the latest Energy Star 6.0 requirements. EnergyStar 6 Efficiency (%) High efficiency (>90%) Proprietary SJ MOSFET ensures compliance with the latest international efficiency standards High efficiency operation contributes greater system energy savings 87.00% Standard: 86.35% Over 90% possible through circuit optimization 86.42% 86.10% 85.70% Equivalent Products ROHM BM2P014 ROHM BM2P014 Equivalent Products @AC100V @AC230V (Based on ROHM evaluation) Standby Power (25W Adapter Utilizing BM2P014) ROHM SJ MOSFETs feature high (650V) voltage resistance, low ON resistance, low gate charge, and high-speed switching capability, contributing to considerably lower power consumption during Standby. Standby Power Compact package Com plia nt - Energy Star 6 (ES6) - EU Requirements 150 <100mW ES6 Requirement @AC100V 50 <50mW Required by EU 100 0 Integrated SJ MOSFET enables increased miniaturization ES6 Requirement @AC230V <210mW 200 Output Power (mW) Significantly reduced Standby power Improved efficiency minimizes Standby power Less than 20mW Less than 30mW @AC100V @AC230V High-Power Insertion Type (Based on ROHM evaluation) Compact Surface Mount Type Mounting Area 47% smaller Compared to conventional planar MOSFETs, ROHM’s SJ MOSFETs feature much less heat generation, allowing smaller packages to be used. DIP7 9.2×6.35×4.3 (mm) Ideal for embedded power supplies and adapters SOP8 6.2×5.0×1.5 (mm) Optimized for compact devices Product Lineup Common Specifications ■ PWM Current Mode operation (PWM frequency: 65kHz, hopping function included) ■ Light load burst operation/ Frequency reduction function ■ Integrated 650V startup circuit Select the protection ■ 650V Switching SJ MOSFET built in ■ Multiple protection functions • Overheating protection • SOURCE pin open/short protection • Secondary side overcurrent protection (64ms timer auto restore) functions, ON resistance, and package type to suit application needs AC/DC Converter IC Family AC/DC Converter ICs with Built-In MOS (PWM) High-Power Insertion Type (BM2Pxxx Series) AC/DC Output Power BR VCC OVP *2 MOSFET ON Resistance LATCH 8W Class and below 13W Class and below 19W Class and below 25W Class and below (BM2PxxxF Series) DIP7 Package (9.2×6.35×4.3mm) Protection Functions *1 Compact Surface Mount Type Auto Restart LATCH Part No. AC/DC Output Power BM2P092 BM2P093 Protection Functions BR *1 VCC OVP *2 MOSFET ON Resistance LATCH BM2P091 8.5Ω (Typ.) SOP8 Package (6.2×5.0×1.5mm) 5W Class and below Auto Restart LATCH Part No. BM2P091F 8.5Ω (Typ.) BM2P092F BM2P093F Auto Restart BM2P094 Auto Restart BM2P094F LATCH BM2P051 LATCH BM2P051F Auto Restart LATCH 4.0Ω (Typ.) BM2P052 BM2P053 Auto Restart BM2P054 LATCH BM2P031 Auto Restart LATCH 2.4Ω (Typ.) LATCH BM2P011 LATCH Auto Restart LATCH 4.0Ω (Typ.) BM2P052F BM2P053F BM2P054F Auto Restart *1: Brown In/Out voltage protection function *2: VCC pin over-/under-voltage protection function BM2P033 BM2P034 1.4Ω (Typ.) Auto Restart BM2P032 Auto Restart Auto Restart 8W Class and below Isolated/ non-isolated BM2P012 BM2P013 BM2P014 AC/DC Converter ICs with External MOS (PWM) ■ Isolated Configurations 5V/1A, 12V/1.5A ■ Non-Isolated Configurations 20V/0.2A, -12V/0.2A AC/DC Converter ICs with External MOS (Quasi-Resonant) The content specified in this document is correct as of September 1st, 2013. [O_009] 56O6731E 09.2013 ROHM