INTERSIL HA

HA-5127/883
October 2004
UCT
NT
PROD
E
T
E
C EM E
L
OBSO DED REPLA enter at
EN
rt C
/tsc
COMM
Suppo
NO RE r Technical .intersil.com
u
w
w
to
contac TERSIL or w
IN
8
8
Ultra Low Noise,
1- 8
Precision Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
The HA-5127/883 monolithic operational amplifier features
an excellent combination of precision DC and wideband high
speed characteristics. Utilizing the Intersil D.I. technology
and advanced processing techniques, this unique design
unites low noise precision instrumentation performance with
high speed, wideband capability.
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . . .7V/µs (Min)
• Unity Gain Bandwidth . . . . . . . . . . . . . . . . . .5MHz (Min)
This amplifier’s impressive list of features include low VOS,
wide gain-bandwidth, high open loop gain, and high CMRR.
Additionally, this flexible device operates over a wide supply
range while consuming only 120mW of power.
• Low Noise Voltage (at 1kHz) . . . . . . . . 4.5nV/√Hz (Max)
• Low Offset Voltage . . . . . . . . . . . . . . . . . . .100µV (Max)
• Low Offset Drift With Temperature . . . 1.8µV/oC (Max)
Using the HA-5127/883 allows designers to minimize errors
while maximizing speed and bandwidth.
• High CMRR . . . . . . . . . . . . . . . . . . . . . . . . . . 100dB (Min)
• High Voltage Gain . . . . . . . . . . . . . . . . . . 700kV/V (Min)
This device is ideally suited for low level transducer signal
amplifier circuits. Other applications which can utilize the
HA-5127/883’s qualities include instrumentation amplifiers,
pulse or RF amplifiers, audio preamplifiers, and signal conditioning circuits.
Applications
• High Speed Signal Conditioners
• Wide Bandwidth Instrumentation Amplifiers
• Low Level Transducer Amplifiers
Part Number Information
• Fast, Low Level Voltage Comparators
PART
NUMBER
• Highest Quality Audio Preamplifiers
• Pulse/RF Amplifiers
HA2-5127/883
TEMPERATURE
RANGE
-55oC to +125oC
PACKAGE
8 Pin Can
Pinout
HA-5127/883
(METAL CAN)
TOP VIEW
BAL
8
BAL
-IN
1
+
2
+IN
7
V+
6 OUT
5
3
NC
4
V- (CASE)
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc. | Copyright © Intersil Americas Inc. 2001, 2004
1
Spec Number
511008-883
FN3751.2
Specifications HA-5127/883
Absolute Maximum Ratings
Thermal Information
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . 44V
Differential Input Voltage (Note 2) . . . . . . . . . . . . . . . . . . . . . . . 0.7V
Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to VInput Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Differential Output Current . . . . . . . . . . .Full Short Circuit Protection
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300oC
Thermal Resistance
θJA
θJC
Metal Can Package . . . . . . . . . . . . . . . . . 155oC/W 67oC/W
Package Power Dissipation Limit at +75oC for TJ ≤ +175oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW
Package Power Dissipation Derating Factor Above +75oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Recommended Operating Conditions
VINCM ≤ 1/2 (V+ - V-)
RL ≥ 600Ω
Operating Temperature Range. . . . . . . . . . . . . . . . -55oC to +125oC
Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 100kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS
Input Offset Voltage
SYMBOL
VIO
CONDITIONS
TEMPERATURE
MIN
MAX
UNITS
1
+25oC
-100
100
µV
-300
300
µV
-
80
nA
-
150
nA
-75
75
nA
-135
135
nA
10.3
-
V
10.3
-
V
-
-10.3
V
-
-10.3
V
700
-
kV/V
300
-
kV/V
700
-
kV/V
300
-
kV/V
100
-
dB
VCM = 0V
2, 3
Input Bias Current
IB
VCM = 0V,
RS = 10kΩ, 50Ω
 ------------------
 2 
+I
Input Offset Current
Common Mode
Range
IIO
+CMR
-CMR
Large Signal Voltage
Gain
+AVOL
-AVOL
Common Mode
Rejection Ratio
+CMRR
B
+ -I
-CMRR
V+ = +4.7V,
V- = -25.3V
V+ = +25.3V,
V- = -4.7V
VOUT = 0V and +10V,
RL = 2kΩ
VOUT = 0V and -10V,
RL = 2kΩ
+VOUT1
2, 3
1
2, 3
1
2, 3
1
2, 3
4
5, 6
4
5, 6
∆VCM = +11V
1
+VOUT2
-VOUT2
+125 C, -55 C
o
+25 C
+125oC,
-55oC
+25oC
+125oC,
-55oC
+25oC
+125oC,
-55oC
+25oC
o
o
+125 C, -55 C
+25
+125o
oC
o
C, -55 C
o
+25 C
+125oC,
-55oC
o
+25 C
o
o
+125 C, -55 C
100
-
dB
1
+25oC
100
-
dB
100
-
dB
11.5
-
V
11.5
-
V
-
-11.5
V
2, 3
RL = 2kΩ
4
5, 6
-VOUT1
o
2, 3
∆VCM = -11V
∆VCM = -10V
Output Voltage
Swing
1
o
B
VCM = 0V,
+RS = 10kΩ,
-RS = 10kΩ
∆VCM = +10V
LIMITS
GROUP A
SUBGROUPS
RL = 2kΩ
4
o
o
+125 C, -55 C
o
+25 C
+125
oC,
-55oC
o
+25 C
o
o
5, 6
+125 C, -55 C
-
-11.5
V
4
+25oC
10
-
V
-
-10
V
RL = 600Ω
RL = 600Ω
4
o
+25 C
Spec Number
2
511008-883
Specifications HA-5127/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 100kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS
Output Current
Quiescent Power
Supply Current
SYMBOL
TEMPERATURE
MIN
MAX
UNITS
+IOUT
VOUT = -10V
4
+25oC
16.5
-
mA
-IOUT
VOUT = +10V
4
+25oC
-
-16.5
mA
+ICC
VOUT = 0V, IOUT =
0mA
1
+25oC
-
4
mA
2, 3
+125oC, -55oC
-
4
mA
1
+25oC
-4
-
mA
2, 3
+125oC, -55oC
-4
-
mA
1
+25oC
86
-
dB
2, 3
+125oC, -55oC
86
-
dB
1
+25oC
86
-
dB
2, 3
+125oC, -55oC
86
-
dB
1
+25oC
VIO-1
-
mV
2, 3
+125oC, -55oC
VIO-1
-
mV
1
+25oC
VIO+1
-
mV
2, 3
+125oC, -55oC
VIO+1
-
mV
VOUT = 0V, IOUT =
0mA
-ICC
Power Supply
Rejection Ratio
CONDITIONS
∆VSUP = 14V
+PSRR
∆VSUP = 13.5V
∆VSUP = 14V
-PSRR
∆VSUP = 13.5V
Offset Voltage
Adjustment
LIMITS
GROUP A
SUBGROUPS
+VIOAdj
Note 1
-VIOAdj
Note 1
NOTE:
1. Offset adjustment range is [VIO (Measured) ±1mV] minimum referred to output. This test is for functionality only to assure adjustment
through 0V.
2. For differential input voltages greater than 0.7V, the input current must be limited to 25mA to protect the back-to-back input diodes.
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 2kΩ, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified.
PARAMETERS
Slew Rate
SYMBOL
TEMPERATURE
MIN
MAX
UNITS
+SR
VOUT = -3V to +3V
7
+25oC
7
-
V/µs
-SR
VOUT = +3V to -3V
7
+25oC
7
-
V/µs
Rise and Fall Time
Overshoot
CONDITIONS
LIMITS
GROUP A
SUBGROUP
o
tR
VOUT = 0 to +200mV
10% ≤ TR ≤ 90%
7
+25 C
-
150
ns
tF
VOUT = 0 to -200mV
10% ≤ TF ≤ 90%
7
+25oC
-
150
ns
+OS
VOUT = 0 to +200mV
7
+25oC
-
40
%
-OS
VOUT = 0 to -200mV
7
+25oC
-
40
%
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Characterized at: VSUPPLY = ±15V, RLOAD = 2kΩ, CLOAD = 50pF, AV = +1V/V, Unless Otherwise Specified.
LIMITS
PARAMETERS
SYMBOL
CONDITIONS
NOTES
TEMPERATURE
MIN
MAX
UNITS
Average Offset Voltage Drift
VIOTC
VCM = 0V
1
-55oC to +125oC
-
1.8
µV/oC
Differential Input Resistance
RIN
VCM = 0V
1
+25oC
0.8
-
MΩ
Spec Number
3
511008-883
Specifications HA-5127/883
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Characterized at: VSUPPLY = ±15V, RLOAD = 2kΩ, CLOAD = 50pF, AV = +1V/V, Unless Otherwise Specified.
LIMITS
PARAMETERS
SYMBOL
Low Frequency Peak-to-Peak
Noise
ENP-P
Input Noise Voltage Density
Input Noise Current Density
Unity Gain Bandwidth
EN
IN
UGBW
CONDITIONS
NOTES
TEMPERATURE
MIN
MAX
UNITS
0.1Hz to 10Hz
1
+25oC
-
0.25
µVP-P
RS = 20Ω, fO = 10Hz
1
+25oC
-
10.0
nV/√Hz
RS = 20Ω, fO = 100Hz
1
+25 C
-
5.6
nV/√Hz
RS = 20Ω, fO = 1kHz
1
+25oC
-
4.5
nV/√Hz
1
+25 C
-
4.0
pA/√Hz
RS = 2MΩ, fO = 100Hz
1
+25oC
-
2.3
pA/√Hz
1
+25 C
-
0.6
pA/√Hz
VO = 100mV
1
+25oC
5
-
MHz
VPEAK = 10V
Minimum Closed Loop Stable
Gain
CLSG
Output Resistance
Quiescent Power
Consumption
ROUT
o
1, 2
+25 C
111
-
kHz
RL = 2kΩ, CL = 50pF
1
-55oC to +125oC
±±1
-
V/V
To 0.1% for a 10V Step
1
+25oC
-
2
µs
Open Loop
PC
o
RS = 2MΩ, fO = 1kHz
FPBW
tS
o
RS = 2MΩ, fO = 10Hz
Full Power Bandwidth
Settling Time
o
VOUT = 0V, IOUT = 0mA
1
+25 C
-
100
Ω
1, 3
-55oC to +125oC
-
120
mW
o
NOTES:
1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization
based upon data from multiple production runs which reflect lot to lot and within lot variation.
2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2πVPEAK).
3. Quiescent Power Consumption based upon Quiescent Supply Current test maximum. (No load on output.)
TABLE 4. ELECTRICAL TEST REQUIREMENTS
MIL-STD-883 TEST REQUIREMENTS
SUBGROUPS (SEE TABLES 1 AND 2) (NOTE 2)
Interim Electrical Parameters (Pre Burn-In)
1
Final Electrical Test Parameters
1 (Note 1), 2, 3, 4, 5, 6, 7
Group A Test Requirements
1, 2, 3, 4, 5, 6, 7
Groups C and D Endpoints
1
NOTES:
1. PDA applies to Subgroup 1 only.
2. The Subgroup assignments of the parameters in these tables were patterned after Mil-M-38510/135, with the exception of VIO, which
is Subgroups 1, 2, 3.
Spec Number
4
511008-883
HA-5127/883
Die Characteristics
DIE DIMENSIONS:
104 x 65 x 19 mils ± 1 mils
2650 x 1650 x 483µm ± 25.4µm
METALLIZATION:
Type: Al, 1% Cu
Thickness: 16kÅ ± 2kÅ
GLASSIVATION:
Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.)
Silox Thickness: 12kÅ ± 2kÅ
Nitride Thickness: 3.5kÅ ± 1.5kÅ
WORST CASE CURRENT DENSITY:
3.6 x 105A/cm2
This device meets Glassivation Integrity Test Requirement
per MIL-STD-883 Method 2021 and MIL-I-38535 Paragraph 30.5.5.4.
SUBSTRATE POTENTIAL (Powered Up): VTRANSISTOR COUNT: 63
PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
HA-5127/883
BAL
BAL
-IN
V+
+IN
OUT
NC
V-
Spec Number
5
511008-883