CPF Datasheet

CPF
www.vishay.com
Vishay Dale
Metal Film Resistors, Industrial Power, Precision, Flameproof
FEATURES
•
•
•
•
•
•
•
High power rating, small size
Flameproof, high temperature coating
Special filming and coating processes
Excellent high frequency characteristics
Low noise
Low voltage coefficient
Material categorization: 
For definitions of compliance please see
www.vishay.com/doc?99912
Available
Available
Note
* This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
MAXIMUM WORKING
VOLTAGE (1)
V
POWER RATING
P70 °C
W
CPF1
CPF-1
250
1
CPF2
CPF-2
350
2
CPF3
CPF-3
500
3
Note
(1) Continuous working voltage shall be
RESISTANCE
RANGE

TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
5 to 150K
5 to 150K
1 to 150K
0.5 to 150K
0.5 to 150K
0.1 to 150K
5 to 150K
5 to 150K
1 to 150K
0.5 to 150K
0.5 to 150K
0.1 to 150K
8 to 150K
8 to 150K
1 to 150K
1 to 150K
1 to 150K
0.1 to 150K
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5, 1, 2, 5
0.5, 1, 2, 5
1, 2, 5
1
2, 5
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5, 1, 2, 5
0.5, 1, 2, 5
1, 2, 5
1
2, 5
0.1, 0.25, 0.5, 1
0.1, 0.25, 0.5, 1, 2, 5
0.5, 1, 2, 5
1, 2, 5
1
2, 5
25
50
100
150
200
200
25
50
100
150
200
200
25
50
100
150
200
200
P x R or maximum working voltage, whichever is less
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CPF1562R00FKR36 (preferred part numbering format)
C
P
F
1
5
GLOBAL MODEL
RESISTANCE VALUE
CPF1
CPF2
CPF3
R=Ω
K = kΩ
R10000 = 0.1 Ω
10R000 = 10 Ω
150K00 = 150 kΩ
6
2
R
TOLERANCE
CODE
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F=±1%
G=±2%
J=±5%
0
0
F
K
TEMPERATURE
COEFFICIENT
E = 25 ppm
H = 50 ppm
K = 100 ppm
L = 150 ppm
N = 200 ppm
R
3
6
PACKAGING
SPECIAL
E14 = Lead (Pb)-free, bulk
Blank = Standard
E36 = Lead(Pb)-free, T/R (full)
(Dash Number)
EE6 = Lead (Pb)-free,
(Up to 3 digits)
T/R (1000 pieces)
From 1 to 999
B14 = Tin/lead, bulk
as applicable
R36 = Tin/lead, T/R (full)
RE6 = Tin/lead, T/R (1000 pieces)
Historical Part Number example: CPF-15620FT-1 R36 (will continue to be accepted)
CPF-1
5620
F
T-1
R36
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
TEMP. COEFFICIENT
PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
Revision: 11-Sep-13
Document Number: 31021
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CPF
www.vishay.com
Vishay Dale
TEMPERATURE COEFFICIENT CODES
GLOBAL TC CODE
HISTORICAL TC CODE
TEMPERATURE COEFFICIENT
E
H
K
L
N
T-9
T-2
T-1
T-0
T-00
25 ppm/°C
50 ppm/°C
100 ppm/°C
150 ppm/°C
200 ppm/°C
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CPF1
CPF2
Rated Dissipation at 70 °C
W
1
2
CPF3
3
Limiting Element Voltage (1)
V
250
350
500
Insulation Voltage
Veff
900
900
900
Thermal Resistance
K/W
85
60
50
Insulation Resistance

1010
Category Temperature Range
°C
-65 °C/+230 °C
P x R
DIMENSIONS
1.50 ± 0.125 (2)
(38.10 ± 3.18)
L
d
L1 max.
HEAT RISE (°C ABOVE AMBIENT)
Note
(2) Lead length for product in bulk pack. For product supplied in
tape and reel, the actual lead length would be based on the body
size, tape spacing and lead trim.
250
CPF1
DIMENSIONS in inches (millimeters)
GLOBAL
MODEL
D
CPF2
CPF3
200
L
D
L1 max.
d
CPF1
0.240 ± 0.020 0.090 ± 0.008 0.310 0.025 ± 0.002
(6.10 ± 0.51) (2.29 ± 0.20) (7.87) (0.64 ± 0.05)
CPF2
0.344 ± 0.031 0.145 ± 0.015 0.425 0.032 ± 0.002
(8.74 ± 0.79) (3.68 ± 0.38) (10.80) (0.81 ± 0.05)
CPF3
0.555 ± 0.041 0.180 ± 0.015 0.650 0.032 ± 0.002
(14.10 ± 1.04) (4.57 ± 0.381) (16.51) (0.81 ± 0.05)
% RATED POWER
Note
(1) Rated voltage
120
100
80
60
150
40
100
20
50
0
- 55
0
0
1
2
3
4
5
APPLIED POWER IN W
- 25
0
30
60
90
70
120
150 180
210
240
AMBIENT TEMP. IN °C
DERATING
THERMAL RESISTANCE
Note
• Surface temperatures were taken with an infrared pyrometer in
+25 °C still air. Resistors were supported by their leads in test
clips at a point 0.500" (12.70 mm) out from the resistor body
ends.
MATERIAL SPECIFICATIONS
Element
Core
Cleaned high purity ceramic
Coating
Special high temperature conformal coat
Termination
Standard lead material is solder-coated
Solderable and weldable per
MIL-STD-1276, Type C
Revision: 11-Sep-13
MECHANICAL SPECIFICATIONS
Proprietary nickel-chrome alloy
Terminal Strength
Solderability
2 pound pull test
Continuous satisfactory coverage
when tested in accordance with
MIL-STD-202, Method 208
Document Number: 31021
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CPF
www.vishay.com
Vishay Dale
MARKING
Temperature Coefficient: T00 = 200 ppm, T0 = 150 ppm, T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm
CPF1, CPF2, CPF3: (5 lines)
DALE
CPF-1
49.9 k
1 % T2
1208
Manufacturer’s name
Style and size
Value
Tolerance and TC
4-digit date code
PERFORMANCE
TEST
Thermal Shock
MAX. R (TYPICAL TEST LOTS)
± 1.0 %
Short Time Overload
± 0.5 %
Low Temperature Operation
± 0.5 %
Moisture Resistance
± 1.5 %
Resistance to Soldering Heat
± 0.5 %
Shock
± 0.5 %
Vibration
± 0.5 %
Terminal Strength
± 0.5 %
Dielectric Withstanding Voltage
± 0.5 %
Life
± 2.0 %
Revision: 11-Sep-13
Document Number: 31021
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages