CMF Fusible www.vishay.com Vishay Dale Metal Film Resistors, Special Purpose, Fusible, Flameproof FEATURES • Special filming and coating processes • Fusible - circuit protection in case of other Available component failure • Flameproof - meets EIA RS-325, will not flame when overloaded • Tape and reel packaging is standard Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P70 °C W RESISTANCE RANGE (1) TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C CMF55..39 CMF-55-39 0.25 4 to 10K 1 100 CMF60..64 CMF-60-64 0.50 4 to 23K 1 100 CMF70..5 CMF-70-5 1.5 4 to 30K 1 100 Note (1) Contact factory for extended values TECHNICAL SPECIFICATIONS PARAMETER UNIT CMF55..39 CMF60..64 W 0.25 0.50 1.5 VRMS 350 500 1000 Rated Dissipation at 70 °C Maximum Flame Test Voltage Dielectric Strength CMF70..5 VAC 450 750 900 Insulation Resistance 1010 1010 1010 Operating Temperature Range °C -65/+165 -65/+165 -65/+165 Weight (Max.) g 0.28 0.50 1.30 GLOBAL PART NUMBER INFORMATION Global Part Numbering: CMF55100R00FKRE39 (preferred part numbering format) C M F 5 5 1 0 0 R 0 0 F K R E 3 9 GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING SPECIAL CMF55 CMF60 CMF70 R= K = k 4R0000 = 4.0 680R00 = 680 23K000 = 23 k F=±1% K = 100 ppm EK = Lead (Pb)-free, bulk EA = Lead (Pb)-free, T/R (full) EB = Lead (Pb)-free, T/R (1000 pieces; except 70's) 39 = Fusible CMF 55 64 = Fusible CMF60 5 = Fusible CMF70 BF = Tin/lead, bulk RE = Tin/lead, T/R (full; except 70's) CP = Tin/lead, T/R (full; 70's only) R6 = Tin/lead, T/R (1000 pieces; except 70's) Historical Part Number example: CMF-55-391000F R36 (will continue to be accepted) CMF-55-39 1000 F R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). Revision: 14-May14 Document Number: 31031 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CMF Fusible www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 1.500 ± 0.125 (1) (38.10 ± 3.18) A C (Max.) D B Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. A B C (Max.) D CMF55..39 0.240 ± 0.020 (6.10 ± 0.51) 0.090 ± 0.008 (2.29 ± 0.21) 0.290 (7.37) 0.025 ± 0.002 (0.64 ± 0.05) CMF60..64 0.370 ± 0.035 (9.40 ± 0.89) 0.145 ± 0.010 (3.68 ± 0.25) 0.425 (10.80) 0.032 ± 0.002 (0.81 ± 0.05) CMF70..5 0.562 ± 0.031 (14.27 ± 0.79) 0.230 ± 0.015 (5.84 ± 0.38) 0.687 (17.54) 0.032 ± 0.002 (0.81 ± 0.05) GLOBAL MODEL MARKING Model: C55-39 = CMF55-39, C60-64 = CMF60-64, C70-5 = CMF70-5 Temperature coefficient: T1 = 100 ppm CMF55-39, CMF60-64, CMF70-5: (5 lines) Manufacturer Model Value Tolerance and TC 4-digit date code DALE C55-39 1.47 k 1 % T1 1130 FUSIBLE, FLAMEPROOF 24 FUSING TIME (s) FUSING TIME (s) (Typical Fusing Times) 22 20 18 16 120 100 80 14 60 12 CMF70..5 10 40 8 CMF60..64 6 20 4 2 0 CMF55..39 5 10 15 20 25 30 35 APPLIED POWER (W) 0 0 10 20 30 40 50 60 70 APPLIED POWER (W) Note • Fusing time graphs represent an average for the resistance value range. Low resistance parts require higher power to fuse than high resistance parts. It is recommended that values less than 200 be evaluated for specific applications. Revision: 14-May14 Document Number: 31031 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000