RLP Datasheet

RLP
www.vishay.com
Vishay Sfernice
Insulated Precision Wirewound Resistors Axial Leads
FEATURES
In wirewound precision resistors, the RLP series holds a
leading position in professional applications whenever an
excellent stability of the ohmic value and a correspondingly
low temperature coefficient are required at the same time.
The RLP model resistors comply with the most stringent
requirements of the CECC 40-201-006 specification. The
series consists of 5 models covering the power range from
1 W to 10 W.
Non-inductive versions can be supplied on request by
specifying RLP-NI. For higher power dissipations, the use of
RH series resistors is recommended.
•
•
•
•
•
•
•
•
•
•
1 W to 10 W at 25 °C
Approved according to CECC 40-201-006
According to MIL-R-26/5C and MIL-R-26/6C
Excellent stability < ± 0.3 % after 1000 h
High power up to 10 W at 25 °C
Low ohmic values 10 m available
Low temperature coefficient  ± 50 ppm/°C
Electrical insulation
Climatic protection
Termination = Pure matte tin or Sn/Ag/Cu according to the
ohmic value
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters
INSULATED
25 min.
A
ØB
ØE
45° chamfer
max. 0.25 mm
deep
25 min.
25 min.
Ø a ± 0.02
4
4
RLP1 - RLP2 a = 1 mm
RLP3 - 6 - 10 a = 1.2 mm
L max.
MOLDED
ØE
A
Ø B MAX.
SERIES
AND STYLE
A MAX.
RLP1
E ± 0.1
WEIGHT
g
R > 0.15 
R  0.15 
7
2.5
-
0.6
0.27
RLP2
10.2
4.0
6
0.6
0.48
RLP3
14
5.54
9
0.8
1.3
RLP6
23.82
8.71
11
0.8
3.4
RLP10
46.78
10.32
180K
0.8
8.6
RLP6
RLP10
25 min.
ØB
RLP1 - RLP2
TECHNICAL SPECIFICATIONS
VISHAY SFERNICE SERIES AND STYLE
RLP1
RLP2
RLP3
Reference CECC 40-201-006
A
B
C
D
E
Cross-Reference NF C83-210
RP8
RP7
RP4
RP5
RP6
Cross-Reference MIL-R-26/5C and MIL-R-26/6C
RW81
RW80
RW79
RW74
RW78
CECC 40-201-006 Power
at 25 °C, P25
at 70 °C, P70
1W
0.8 W
1.5 W
1.25 W
2.5 W
2W
-
-
Extended Sfernice Power
at 25 °C, P25
at 70 °C, P70
1W
0.8 W
2W
1.65 W
3W
2.5 W
6W
5W
10 W
8.2 W
± 5 % E24
0.05  to
2 k
0.025  to
6.8 k
0.01  to
15 k
0.02  to
59 k
0.06  to
150 k
± 2 % E48
0.05  to
2 k
0.025  to
6.8 k
0.03  to
15 k
0.02  to
59 k
0.06  to
150 k
± 1 % E96
0.05  to
2 k
0.025  to
6.8 k
0.03  to
15 k
0.02  to
59 k
0.06  to
150 k
± 0.5 % E96
0.4  to
2 k
0.4  to
6.8 k
0.0499  to
15 k
0.3  to
59 k
0.3  to
150 k
Power Rating, Pr
Ohmic Range in Relation to Tolerance
± 0.1 % E96
Qualified Ohmic Value Range 
CECC 40-201-006
Limiting Element Voltage, Umax. AC/DC
Critical Resistance
Please consult Vishay Sfernice
1  to
470 
0.2  to
1.78 k
0.1  to
3.57 k
50 V
120 V
200 V
Out of nominal ohmic range
0.1  to
12.1 k
0.1  to
40.2 k
300 V
720 V
17 800 W
51 100 W
Note
•
Undergoes European Quality Insurance System (CECC)
Revision: 02-Apr-15
Document Number: 50009
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RLP
www.vishay.com
Vishay Sfernice
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE
RANGE

MODEL
RATED POWER
P25 °C
W
TOLERANCE
±%
RLP1
0.05 to 2K
1
0.1, 0.2, 0.5, 1, 2, 5
RLP2
0.025 to 6.8K
2
0.1, 0.2, 0.5, 1, 2, 5
RLP3
0.01 to 15K
3
0.1, 0.2, 0.5, 1, 2, 5
RLP6
0.02 to 59K
6
0.1, 0.2, 0.5, 1, 2, 5
RLP10
0.06 to 150K
10
0.1, 0.2, 0.5, 1, 2, 5
MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Series and Style
Temperature Range
Encapsulant
RLP1, RLP2
High temperature
mold compound
RLP3, RLP6, RLP10
High temperature
silicone coating
Resistive Element
CuNi or NiCr
Ceramic Substrate
Alumina or steatite
Termination
Climatic Category
(LCT/UCT/days)
-55 °C to 275 °C
55/200/56
Pure matte tin or Sn/Ag/Cu
PERFORMANCE
TESTS
Short Time Overload
Load Life
CONDITIONS
REQUIREMENTS
(R/R OR INDICATED PARAMETER)
CECC 40-201-006
IEC 60115-1
6.25 PrExtended Sfernice Power or U = 2 Umax./5 s
for RLP1, RLP2, RLP3
12 PrExtended Sfernice Power or U = 2 Umax./5 s
for RLP6, RLP10
± (0.25 % + 0.05 )
IEC 60115-1
90’/30’ cycles
± (0.5 % + 0.05 )
Insulation R  1 G
1000 h PrExtended Sfernice Power + 25 °C
Dielectric w/s Voltage
Rapid Change of Temperature
Climatic Sequence
Humidity (Steady State)
Shock
Vibration
Load Life at Upper Category
Temperature
Revision: 02-Apr-15
IEC 60115-1
URMS = 500 V/60 s
No flashover or breakdown
Leakage current < 10 μA
IEC 60115-1
IEC 60068-2-14 Test Na
5 cycles (30’ at LCT/30’ at UCT)
-55 °C / +200 °C
± (0.25 % + 0.05 )
IEC 60115-1
-55 °C / +200 °C/56 days
± (0.5 % + 0.05 )
IEC 60115-1
IEC 60068-2-3 Test Ca
95 % HR/40 °C
56 days
± (0.5 % + 0.05 )
Insulation R  100 M
IEC 60115-1
IEC 60068-2-27 Test Ea
50 g’s/half sine/
3 times by direction (i.e. 18 shocks)
± (0.25 % + 0.05 )
IEC 60115-1
IEC 60068-2-6 Test Fc
10 Hz / 55 Hz
± (0.25 % + 0.05 )
IEC 60115-1
90’ / 30’ cycles
± (0.5 % + 0.05 )
Insulation R  1 G
1000 h PrExtended Sfernice Power +200 °C
Document Number: 50009
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RLP
www.vishay.com
Vishay Sfernice
TEMPERATURE COEFFICIENT in the range -55 °C to +200 °C
REQUIREMENT
CECC 40-201-006
OHMIC RANGE
<1 
± 100 ppm/°C
1  to < 10 
± 50 ppm/°C
 10 
± 25 ppm/°C
STABILITY AND POWER RATING
Stability changes slightly according to power rating and ambient temperature. This fact is especially important for users needing
a life drift lower than the initial resistance tolerance. Typical drifts, after 2000 h life test made under the 90’ / 30’ conditions and
at an ambient temperature of 25 °C, are:
OHMIC RANGE
Pr
0.5 Pr
RLP1
RLP2
RLP3
RLP6
RLP10
R %/R %
1W
2W
3W
5W
10 W
0.3
0.5 W
1W
1.5 W
2.5 W
5W
0.15
POWER RATING
TEMPERATURE RISE
75
50
37
25
0
0
50
100
150
200
RL
P6
150
100
50
0
0
250 275 300 350
0
P1
RL
RL
P3
200
RLP
1
HOT SPOT TEMPERATURE IN °C
RATED POWER IN %
100
RLP
2
250
125
AMBIENT TEMPERATURE IN °C
1.5
3.0
4.5
6.0
7.5
10.0
RATED POWER IN W
NON INDUCTIVE WINDING (NI)
Non inductive (Ayrton Perry) winding available.
Please consult Vishay Sfernice.
PACKAGING (see datasheet 50032 and 50033)
Reel of 1000 units for RLP1, RLP2, RLP3
Ammopack of 500 units for RLP1, RLP2, RLP3
Bag of 100 units for RLP1, RLP2
Blister of 20 units for RLP3
Box of 50 units for RLP6, RLP10
INDUCTANCE IN µH
INDUCTANCE (Example)
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
RLP3 100 W
MARKING
Vishay Sfernice trademark, series, style, CECC style (if
applicable) nominal resistance (in , k), tolerance (in %),
manufacturing date.
RLP3 NI 100 W
0.1
1
10
FREQUENCY IN MHz
Revision: 02-Apr-15
Document Number: 50009
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RLP
www.vishay.com
Vishay Sfernice
ORDERING INFORMATION
RLP
01
5R500
J
R15
MODEL
STYLE
OHMIC VALUE
TOLERANCE
PACKAGING
GLOBAL PART NUMBER INFORMATION
R
GLOBAL
MODEL
RLP
L
P
0
6
1
5
0
R
0
J
B
0
0
SIZE
OPTION
OHMIC VALUE
TOLERANCE
PACKAGING
SPECIAL
01
02
03
06
10
N = non inductive winding
The first four digits are
significant figures and the
last digit specifies the
number of zeros to follow.
R designates decimal point.
B = 0.1 %
C = 0.2 %
D = 0.5 %
F=1%
G=2%
J=5%
Standard packaging:
Size 01 and 02:
S14 = bag, 100 pieces
size 03:
B15 = bulk, 20 pieces
size 06 and 10:
B25 = box, 50 pieces
As applicable
Ex = MEX
680R0 = 680 
20301 = 20.3 k
88R88 = 88.88 
...
Revision: 02-Apr-15
Document Number: 50009
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000