Addendum to MC9S08DZ60 Series - Data Sheet

Freescale Semiconductor
Addendum
MC9S08DZ60AD
Rev. 1, 4/2009
Addendum to
MC9S08DZ60 Series Data Sheet
Clarifications for MC9S08DZ60A/48A/32A/16A Devices
This addendum document describes clarifications to the
MC9S08DZ60 Series Data Sheet (document number:
MC9S08DZ60). For convenience, the addenda items are
grouped by revision. Please check our website at
http://www.freescale.com for the latest updates.
The MC9S08DZ60 Series Data Sheet also applies to the
MC9S08DZ60A series of devices.
For users migrating from devices with the 3M05C mask
to devices with the M74K mask, please read the
application note AN3776 MC9S08DZ60 Migrating from
the 3M05C to M74K mask set. This application note
applies to the DZ, DV, DN, DE, and EN series of devices.
© Freescale Semiconductor, Inc., 2009. All rights reserved.
Contents
1
2
Clarifications for Revision 4 . . . . . . . . . . . . . . . . . . . . . . . 2
Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1
Clarifications for Revision 4
Table 1. MC9S08DZ60 Rev 4 Clarification
Location
Description
Section C.1
Updated ordering information. Added “ For ‘Fully Qualified’ part numbers beginning with ‘MC’, A = 1M74K
mask set”.
MC 9 S08 DZ 60 F1 M XX
Status
(MC = Fully Qualified)
(S = Auto Qualified)
Memory
(9 = Flash-based)
Core
Package designator (see Table C-2)
Family
Approximate Flash
size in KB
2
Temperature range
(C = –40°C to 85°C)
(V = –40°C to 105°C)
(M = –40°C to 125°C)
Mask Set Identifier
For “Auto Qualified” part numbers beginning with “S”
F1 = 1M74K mask set
For “Fully Qualified” part numbers beginning with “MC”
A = 1M74K mask set
Revision History
Table 2 provides a revision history for this document.
Table 2. MC9S08DZ60AD Revision History
Rev. Number
1
Substantive Changes
Initial release
Date of Release
4/24/2009
Addendum to MC9S08DZ60 Series Data Sheet, Rev. 1
2
Freescale Semiconductor
Addendum to MC9S08DZ60 Series Data Sheet, Rev. 1
Freescale Semiconductor
3
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1-800-521-6274 or +1-480-768-2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku,
Tokyo 153-0064
Japan
0120 191014 or +81 3 5437 9125
[email protected]
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]
For Literature Requests Only:
Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800-441-2447 or +1-303-675-2140
Fax: +1-303-675-2150
[email protected]
Information in this document is provided solely to enable system and
software implementers to use Freescale Semiconductor products. There are
no express or implied copyright licenses granted hereunder to design or
fabricate any integrated circuits or integrated circuits based on the
information in this document.
Freescale Semiconductor reserves the right to make changes without further
notice to any products herein. Freescale Semiconductor makes no warranty,
representation or guarantee regarding the suitability of its products for any
particular purpose, nor does Freescale Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or
incidental damages. “Typical” parameters that may be provided in Freescale
Semiconductor data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating
parameters, including “Typicals”, must be validated for each customer
application by customer’s technical experts. Freescale Semiconductor does
not convey any license under its patent rights nor the rights of others.
Freescale Semiconductor products are not designed, intended, or authorized
for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other
application in which the failure of the Freescale Semiconductor product could
create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold Freescale
Semiconductor and its officers, employees, subsidiaries, affiliates, and
distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that Freescale Semiconductor was negligent
regarding the design or manufacture of the part.
Freescale™ and the Freescale logo are trademarks of
Freescale Semiconductor, Inc. All other product or service names
are the property of their respective owners.
© Freescale Semiconductor, Inc. 2009. All rights reserved.
MC9S08DZ60AD
Rev. 1
4/2009
Similar pages