VS-3EJH02-M3 www.vishay.com Vishay Semiconductors Hyperfast Rectifier, 3 A FRED Pt® FEATURES • Hyperfast recovery time, reduced Qrr, and soft recovery • 175 °C maximum operating junction temperature Cathode • Low forward voltage drop Anode • Low leakage current • Specific for output and snubber operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SlimSMA (DO-221AC) • Meets JESD 201 class 2 whisker test • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION / APPLICATIONS State of the art hyperfast recovery rectifiers specifically designed with optimized performance of forward voltage drop and hyperfast recovery time. PRODUCT SUMMARY Package DO-221AC (SlimSMA) IF(AV) 3A VR 200 V VF at IF 0.93 V trr 30 ns TJ max. 175 °C Diode variation Single die The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in snubber, boost, lighting, as high frequency rectifiers and freewheeling diodes. The extremely optimized stored charge and low recovery current minimize the switching losses and reduce power dissipation in the switching element. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VRRM Average rectified forward current IF(AV) TC = 145 °C (1) IFSM TJ = 25 °C Non-repetitive peak surge current Operating junction and storage temperatures VALUES UNITS 200 Peak repetitive reverse voltage TJ, TStg V 3 85 A -65 to +175 °C Note (1) Device on PCB with 8 mm x 16 mm soldering lands ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR Forward voltage VF Reverse leakage current IR Junction capacitance CT TEST CONDITIONS MIN. TYP. MAX. 200 - - IF = 3 A - 0.86 0.93 IF = 3 A, TJ = 125 °C - 0.74 0.78 VR = VR rated - - 2 TJ = 125 °C, VR = VR rated - 1 8 VR = 200 V - 13 - IR = 100 μA UNITS V μA pF Revision: 24-Nov-14 Document Number: 94879 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-3EJH02-M3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 50 A/μs, VR = 30 V TEST CONDITIONS - 26 - IF = 0.5 A, IR = 1 A, Irr = 0.25 A - - 30 TJ = 25 °C - 18 - - 26 - - 2.5 - - 4 - TJ = 125 °C Peak recovery current TJ = 25 °C IRRM Reverse recovery charge TJ = 125 °C Qrr IF = 3 A dIF/dt = 200 A/μs VR = 160 V UNITS ns A TJ = 25 °C - 23 - TJ = 125 °C - 50 - MIN. TYP. MAX. UNITS -65 - 175 °C nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Thermal resistance, junction to case RthJC Device mounted on PCB with 8 mm x 16 mm soldering lands - - 10 Thermal resistance, junction to ambient RthJA Device mounted on PCB with 2 mm x 3.5 mm soldering lands - - 110 °C/W Approximate Weight g oz. Case style SlimSMA (DO-221AC) 100 3H2 100 IR - Reverse Current (μA) IF - Instantaneous Forward Current (A) Marking device 0.032 0.0011 10 TJ = 175 °C 1 TJ = 150 °C TJ = 125 °C TJ = 175 °C 10 TJ = 150 °C 1 TJ = 125 °C 0.1 0.01 TJ = 25 °C 0.001 TJ = 25 °C 0.1 0.0001 0.3 0.6 0.9 1.2 1.5 0 50 100 150 200 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 24-Nov-14 Document Number: 94879 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-3EJH02-M3 www.vishay.com Vishay Semiconductors 3.5 RMS limit Average Power Loss (W) CT - Junction Capacitance (pF) 100 10 3 2.5 2 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 1.5 1 0.5 1 0 0 50 100 150 200 0 VR - Reverse Voltage (V) 1.2 1.8 2.4 3 3.6 4.2 4.8 Fig. 5 - Forward Power Loss Characteristics Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 35 180 175 30 170 25 165 trr (ns) Allowable Case Temperature (°C) 0.6 IF(AV) - Average Forward Current (A) 160 DC 155 15 Square wave (D = 0.50) 80 % rated VR applied 150 125 °C 20 25 °C 10 145 See note (1) 5 140 0 0.5 1 1.5 2 2.5 3 100 3.5 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/μs) Fig. 4 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Typical Reverse Recovery vs. dIF/dt 70 60 125 °C Qrr (nC) 50 40 25 °C 30 20 10 100 1000 dIF/dt (A/μs) Fig. 7 - Typical Stored Charge vs. dIF/dt Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see Fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = rated VR Revision: 24-Nov-14 Document Number: 94879 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-3EJH02-M3 www.vishay.com Vishay Semiconductors (3) trr IF ta tb 0 (4) Qrr (2) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (4) Qrr - area under curve defined by trr and IRRM (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current Qrr = (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 8 - Reverse Recovery Waveform and Definitions ORDERING INFORMATION TABLE Device code VS- 3 E J H 02 -M3 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (3 = 3 A) 3 - Circuit configuration: E = single diode 4 - J = SlimSMA package 5 - Process type, H = hyperfast recovery 6 - Voltage code (02 = 200 V) 7 - -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER REEL MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-3EJH02-M3/6A 3500 3500 7"diameter plastic tape and reel VS-3EJH02-M3/6B 14 000 14 000 13"diameter plastic tape and reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95571 Part marking information www.vishay.com/doc?95562 Packaging information www.vishay.com/doc?88869 Revision: 24-Nov-14 Document Number: 94879 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DO-221AC (SlimSMA) DIMENSIONS in inches (millimeters) Cathode Band 0.057 (1.45) 0.049 (1.25) 0.106 (2.70) 0.098 (2.50) 0.171 (4.35) 0.163 (4.15) 0.211 (5.35) 0.199 (5.05) 0.047 (1.20) 0.030 (0.75) Typ.: 0.019 (0.48) Mounting Pad Layout 0.039 (1.00) 0.035 (0.90) 0.060 (1.52) MIN. 0.012 (0.30) 0.006 (0.15) 0.047 (1.20) MIN. 0.123 (3.12) MAX. 0.217 (5.52) REF. 0.047 (1.20) MIN. Revision: 21-Jul-14 Document Number: 95571 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000