Analog ICs for wearable devices STMicroelectronics offers smart solutions for wearable devices Leveraging its long experience in a wide range of technologies, ST offers a selection of products specifically designed for wearable devices targeting applications such as: • Consumer fitness and wellness • Healthcare and medical • Portable infotainment • Industrial monitoring and safety In these applications high precision, low power consumption, compact form factor and outstanding performances are a must and ST’s products take into account the needs of the most recent and innovative wearable devices. Digital sensors Operational amplifiers Analog switches User interface Audio amplifiers Connectivity BlueNRG MCU • Operational amplifiers • Current sensors • Audio amplifiers Analog front-end • Smart reset • Analog switches Analog sensors MEMS microphones Power management • Battery gas gauges • BlueNRG • MEMS microphone Smart reset Battery gas gauges Current sensors 2 ST offers the most complete set of building blocks for wearable devices. Operational amplifiers Large portfolio of highly powerefficient op amp in tiny packages Smart reset Customizable products providing safe and convenient reset Audio amplifiers High accuracy current measurement for contactless battery chargers Compact single and dual switches for audio and USB BlueNRG Bluetooth® smart solution with best-in-class power consumption High-efficiency Class D and G amplifiers for headsets and speakers Current sensors Analog switches Battery gas gauges Low-power gas gauge providing very accurate battery life indicators MEMS microphone Power-efficient microphone solution for smarter voice-controlled devices OPERATIONAL AMPLIFIERS Analog sensors need signal transducers to deliver the information for digital processing, ST offers a dedicated set of operational amplifiers suitable for wearable devices with excellent features in terms of: • Very high accuracy and stability • Low supply voltage and low power consumption for battery operation • Rail-to-rail inputs and outputs • High tolerance to ESD • Extended temperature range • Tiny packages Part number Number of channels Input offset voltage Input bias (mV) @ 25 °C current (pA) typ Supply current x channel (µA) Supply voltage (V) Package (mm) ΔVio/ΔT (µV/°C) GBWP (kHz) OA1NP 1 0.1 1 0.6 1.5 to 5.5 SC70-5 (2.0 x 2.1 x 0.9) 5 8 OA2NP 2 0.1 1 0.6 1.5 to 5.5 DFN8 (2.0 x 2.0 x 0.75) MiniSO8 (3.0 x 4.9 x 1.1) 5 8 OA4NP 4 0.1 1 0.6 1.5 to 5.5 QFN16 (3.0 x 3.0 x 0.9) 5 8 OA1MPA 1 0.2 1 9 1.5 to 5.5 SC70-5 (2.0 x 2.1 x 0.9) 10 120 OA2MPA 2 0.2 1 9 1.5 to 5.5 DFN8 (2.0 x 2.0 x 0.75) MiniSO8 (3.0 x 4.9 x 1.1) 10 120 OA4MPA 4 0.2 1 9 1.5 to 5.5 QFN16 (3.0 x 3.0 x 0.9) 10 120 OA1ZHA 1 0.1 50 28 1.5 to 5.5 SC70-5 (2.0 x 2.1 x 0.9) 0.01 400 OA2ZHA 2 0.1 50 28 1.5 to 5.5 DFN8 (2.0 x 2.0 x 0.75) MiniSO8 (3.0 x 4.9 x 1.1) 0.01 400 OA4ZHA 4 0.1 50 28 1.5 to 5.5 QFN16 (3.0 x 3.0 x 0.9) 0.01 400 3 CURRENT SENSORS Battery and energy management in wearable devices is critical whether for wired or wireless battery chargers or precision current sources from sensors. ST’s current sensing ICs portfolio offers the following benefits: • Up to 70 V line monitoring • Independent supply and common mode voltages • Selectable gains • Low power Common mode operating range (V) Current consumption (µA) Gain (V/V) Temperature range (°C) Supply voltage (V) Package (mm) CS30A 2.8 to 30 165 20 -40 to +125 4 to 24 SOT23-5 (2.9 x 2.8 x 1.2) CS30B 2.8 to 30 165 50 -40 to +125 4 to 24 SOT23-5 (2.9 x 2.8 x 1.2) CS30C 2.8 to 30 165 100 -40 to +125 4 to 24 SOT23-5 (2.9 x 2.8 x 1.2) CS70 2.9 to 70 200 20 to 100 -40 to +125 2.7 to 5.5 TSSOP8 (6.4 x 3.0 x 1.2) Part number SMART RESET ST’s smart reset ICs extend the functional capacity of existing control buttons to give users the possibility of resetting a device, should it be frozen because of any possible misuse. These devices integrate several useful features, such as: • Choice of a single button or two simultaneous buttons to signal a reset • Support for applications where the battery cannot be removed • Tiny packages Number of reset button Number of power button Reset setup delay typ (sec) Reset pulse width (ms) Supply voltage (V) Package (mm) SR1CAR 1 - 1.5 Push button controlled 2 to 5.5 UDFN6 (1 x 1.45) SR1HAR 1 - 4.0 Push button controlled 2 to 5.5 UDFN6 (1 x 1.45) SR1LAR 1 - 6.0 Push button controlled 2 to 5.5 UDFN6 (1 x 1.45) SR1PAA 1 - 7.5 210 2 to 5.5 UDFN6 (1 x 1.45) SR1PAR 1 - 7.5 Push button controlled 2 to 5.5 UDFN6 (1 x 1.45) SR1PBB 1 - 7.5 360 2 to 5.5 UDFN6 (1 x 1.45) SR1UAR 1 - 10.0 Push button controlled 2 to 5.5 UDFN6 (1 x 1.45) SR2HAR 2 - 4 Push button controlled 1.65 to 5.5 UDFN (1.6 x 1.3) SR2LAB 2 - 6 360 1.65 to 5.5 UDFN (1.6 x 1.3) SR2LAR 2 - 6 Push button controlled 1.65 to 5.5 UDFN (1.6 x 1.3) SR2PAR 2 - 7.5 Push button controlled 1.65 to 5.5 UDFN (1.6 x 1.3) SR2UAB 2 - 10 360 1.65 to 5.5 UDFN (1.6 x 1.3) SR2UAR 2 - 10 Push button controlled 1.65 to 5.5 UDFN (1.6 x 1.3) SRC0CS25 1 1 Selectable via ext. capacitor 360 1.6 to 5.5 TDFN12 (2.0 x 3) SRC0GS22 1 1 Selectable via ext. capacitor 360 1.6 to 5.5 TDFN12 (2.0 x 3) Part number 4 ANALOG SWITCHES In portable devices, switches are used to route a great variety of signals such as audio to speakers/headphones or other signals to and from sensors. ST’s analog switch line up is meant to cover all the possible signal typologies from audio to USB, to fit most of the applications. • Ultra-low power dissipation • Low on-resistance • Wide operating voltage range • USB (2.0) high-speed (480 Mbit/s) signal switching compliant • Integrated fail safe function • Tiny packages Logical function Propagation delay Tphl typ (ns) Supply voltage (V) Supply current (µA) Off Isolation (dB) Package (mm) AS21P2THB Dual SPDT 0.13 1.65 to 4.3 0.2 (max) -78 @ 1 MHz QFN10L (1.8 x 1.4 x 0.5) AS11P2TLR Single SPDT 0.13 1.65 to 4.5 0.1 (max) -75 @ 100 kHz DFN6L (1.2 x 1.05 x 0.5) AS21P2TLR Dual SPDT 0.3 1.65 to 4.3 0.05 -66 @ 100 kHz QFN10L (1.8 x 1.4 x 0.5) Part number BATTERY GAS GAUGES Wearable are battery operated devices. Knowing the battery status is a turn key feature to ensure a satisfactory, long user experience. ST’s battery gas gauge ICs can be located in the battery pack or in the wearable device and integrate functions to monitor the battery voltage, current and temperature. Using a built-in coulomb counter, these fuel gauge ICs calculate battery charge and store the data in 16-bit resolution for retrieval by the system controller. Access is via an industry-standard I2C interface, enabling the controller to create an accurate graphical representation of the remaining battery-operating time. ST’s current sensing ICs portfolio offers the following benefits: • Alarm output signals a low SOC (State-of-Charge) condition and low battery voltage • Programmable alarm threshold levels Supply current typ (mA) Supply voltage (V) Battery option (V) Temperature range (°C) Package (mm) GG25L 0.045 2.7 to 4.5 4.35 -40 to +85 CSP12 (2.01 x 1.37 x 0.6) GG25LA 0.045 2.7 to 4.5 4.20 -40 to +85 CSP12 (2.01 x 1.37 x 0.6) Part number AUDIO AMPLIFIERS ST’s wide audio IC portfolio includes low-power headphone amplifiers specifically designed for wearable devices. These devices are characterized by: • High efficiency • Battery operated features • Tiny packages • Superior audio quality Part number A21SP16 A22H165M A22H165 Description 3 W filter-free class D with standby High-performance class-G headphone amplifier High-performance class-G headphone amplifier with I2C volume control Channels Output power (W) Supply voltage (V) SNR @ 1 kHz (dB) Stby current (µA) 1 1x3 2 to 6 85 <1 2 2 x 0.25 2.3 to 4.8 100 0.6 2 2 x 0.25 2.3 to 4.8 100 0.6 Package (mm) Flip-chip 9x500u (1.60 x 1.60 x 0.6) Flip-chip 16x400u (1.65 x 1.65 x 0.6) Flip-chip 16x400u (1.65 x 1.65 x 0.6) 5 BLUENRG ST’s Bluetooth Low Energy network processor has been selected by Electronic Products Magazine as one of the products of the year. The winning products were selected on the basis of innovative design, significant advancement in technology or application and substantial achievement in price and performance. BlueNRG is a very low power Bluetooth low energy (BLE) single-mode network processor, compliant with Bluetooth specification v4.0. The entire Bluetooth low energy stack runs on the embedded Cortex-M0 core. The non-volatile Flash memory allows in-field stack upgrading. BlueNRG allows applications to meet the tight peak current requirements imposed with the use of standard coin cell batteries. Ultra-low-power sleep modes and very short transition times between operating modes allow very low average current consumption, resulting in longer battery life. BlueNRG offers the option of interfacing with external microcontrollers using the SPI transport layer. • Superior battery life • Excellent co-existence performance in • Easy firmware upgrades in the field to crowded 2.4 GHz bandwidth • Long communication range in real environment maintain compliance with future releases of the Bluetooth® specification • Single firmware for supporting master and slave roles Part number Tx current consumption @ 0dBm (mA) RX current typ (mA) Operating voltage (V) Package (mm) 8.2 7.3 2 to 3.6 VFQFPN32 (5 x 5 x 0.9) BlueNRG related tools and software Part number 6 Description Steval-idb002v1 Bluetooth® SMART board based on the BlueNRG low energy network processor stsw-bnrg001 BlueNRG current consumption estimation tool stsw-idb002v1 STSW-IDB002V1 application software setup STEVAL-IDB003V1 BlueNRG IC based Bluetooth® Smart USB dongle MEMS MICROPHONES The voice control is a wide spreading trend across many portable applications, making the interaction easier, faster and smoother. It enables fashionable designs by reducing the number of button. • Tiny packages • Low power consumption • High performance • Solution to integrates more sensors in single package Part number MP23AB02B Sensitivity (dBV) SNR (dB) AOP (dB) Supply voltage range (V) Supply current (μA) Dual mode Package (mm) -38±3 64 125 1.6 - 3.6 150 - RHLGA metal cap 2.5 x 3.35 x 0.98 More information: www.st.com/mems SHARE © STMicroelectronics - May 2014 - Printed in United Kingdom - All rights reserved The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies All other names are the property of their respective owners Order code: BRWEAR0514 For more information on ST products and solutions, visit www.st.com/opamps