Part Number：S6■1□B▲ Net-Access™ S 13029A ©Panduit Corporation Japan Branch EIA19 ( ) 15.88 15.88 12.70 15.88 15.88 12.70mm 10 25 ( +60 [ 85 [ ] ] 598 [mm] 1,044 [mm] 1,115mm 2 2,026 [mm] 5 2,159 [mm] 8 2,292 [mm] 526 767 [mm] POU 583 913 [mm] POU 26mm 0.8 [mm] ) 76 437 [mm] 76 532 [mm] 1,360 [kg] / 1,020 [kg] / 2 42RU 5 45RU 8 48RU BL ( ) 01 B W 2013 4 WH ( ) 19 Page 1 / 7 Part Number：S6■1□B▲ Net-Access™ S 13029A ©Panduit Corporation Japan Branch ( ) (RU) S6212B S6212BP S6512B S6512BP S6812B S6812BP (mm) 42 42 45 45 48 48 ( ) POU ( ) 1 1 1 1 1 1 1,070 1 1 1 1 1 1 1 ( ) ( ) 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 (kg) ( ) 1 1 1 1 1 1 120 122.5 125 127 130 132 9 1 RoHS 01 01 2013.4.19 2013 4 19 Page 2 / 7 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. TOP CAP KNOCK-OUTS FOR POU POWER CORD B REAR SPLIT DOORS FRONT DOOR SIDE PANEL SIDE PANEL 1. VISIT OUR ON-LINE CATALOG AT WWW.PANDUIT.COM FOR A LIST OF CURRENT PARTS APPLICABLE FOR USE WITH THIS PRODUCT. 2. PRIMARY DIMENSIONS ARE IN MILLIMETERS. 3. INDEPENDENT ADJUSTABLE REAR EQUIPMENT MOUNTING RAILS (EIA) ADJUST FROM 76mm TO 437mm AND FROM 526mm TO 767mm WITH POU BRACKETS AND CABLE MANAGEMENT FINGERS IN PLACE. REMOVING POU BRACKETS AND FINGERS INCREASES MAXIMUM E-RAIL SPAN TO 913mm. 4. CAN BE USED WITH ANY 19" EIA STANDARD COMPONENT IN ADDITION TO ALL PANDUIT HORIZONTAL CABLE MANAGEMENT AND PATCH PANEL PRODUCTS. 5. EIA UNIVERSAL STANDARD HOLE PROGRESSION ON EQUIPMENT RAILS 15.88mm, 15.88mm, 12.70mm, 15.88mm, 15.88mm, 12.7mm...ETC. 6. PARTS SUPPLIED: -BASE CABINET -FRONT DOOR (SEE CHART ON SHEET 2) -REAR SPLIT DOOR (SEE CHART ON SHEET 2) -EQUIPMENT RAILS FRONT & REAR (SEE CHART ON SHEET 2) -POU BRACKETS (SEE CHART ON SHEET 2) -CASTERS (SEE CHART ON SHEET 2) -INSTRUCTION SHEET 7. RACK UNIT SPACING NUMERALS ARE CLEARLY PRINTED ON EQUIPMENT MOUNTING RAILS. 8. FULLY BONDED STRUCTURE WHEN ASSEMBLED PER INSTRUCTIONS. 9. STATIC LOAD RATING. 1360 Kg(3000 LBS) 10. ROLLING LOAD RATING. 1020 Kg (2250 LBS) 11. SINGLE POINT GROUND LOCATIONS AT TOP AND BOTTOM OF CABINET. 12. ALL CABINET RAILS ARE INSTALLED NUMBERS UP. B TITLE NET-ACCESS S TYPE CABINET 600mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305QX/00.PRT DATASET FILE NAME 12V305QX_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-27-12 TKW JDW RELEASED TO PRODUCTION THIRD ANGLE PROJECTION 12V305QX-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-27-12 CHK 12V305QX-DC SIZE SCALE JDW NONE 1 SHT 1 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. PART NO. DESCRIPTION NET-ACCESS S-TYPE CABINET 600mm X 42RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 600mm X 42RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 600mm X 45RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 600mm X 45RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 600mm X 48RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 600mm X 48RU X 1070mm DEEP S6212B S6212BP S6512B S6512BP B S6812B S6812BP SINGLE HINGE FRONT DOOR SPLIT REAR DOOR SINGLE PIECE SIDE PANEL FRONT CAGE NUT E-RAIL REAR CAGE NUT FINGER MGMT E-RAIL REAR CAGE NUT STANDARD POU VERTICAL BRACKETS PATCH E-RAIL 01 01 02 02 02 00 01 01 02 02 00 01 01 02 02 01 01 02 01 01 01 01 CASTERS CABLE MGMT FINGERS CABINET WEIGHT 02 04 00 120 Kg/EACH 266 LBS/EACH 02 02 04 00 122.5 Kg/EACH 270 LBS/EACH 02 00 02 04 00 125 Kg/EACH 276 LBS/EACH 02 00 02 02 04 00 127 Kg/EACH 280 LBS/EACH 02 02 02 00 02 04 00 130 Kg/EACH 286 LBS/EACH 02 02 00 02 02 04 00 132 Kg/EACH 290 LBS/EACH B SUBTRACT 18 kg [40 LBS] FOR PACKAGING TITLE NET-ACCESS S TYPE CABINET 600mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305QX/00.PRT DATASET FILE NAME 12V305QX_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-27-12 TKW JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305QX-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-27-12 CHK 12V305QX-DC SIZE SCALE JDW NONE 1 SHT 2 OF 5 A THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 1115 43.9 598 23.5 HEIGHT WITH CASTERS B B 42RU 2026 [79.8] 45RU 2159 [85.0] 48RU 2292 [90.2] 1068 42.0 TILE COVERAGE DEPTH RIGID FRONT CASTERS SWIVEL REAR CASTERS TITLE NET-ACCESS S TYPE CABINET 600mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305QX/00.PRT DATASET FILE NAME 12V305QX_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-27-12 TKW JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305QX-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-27-12 CHK 12V305QX-DC SIZE SCALE JDW NONE 1 SHT 3 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. SEE NOTES ON SHEET 1 FOR REAR EQUIPMENT RAIL ADJUSTMENT RANGE B RACK UNITS ARE NUMBERED AND INDEXED FOR IDENTIFICATION (2) 165mm X 165mm KNOCKOUTS FOR POU POWER CORDS COMPATIBLE W/COOL BOOT P/N: CTGN6X6 (6) LOCATIONS TAPPED FOR M10 THREADED ROD VERTICAL CABLE MANAGEMENT FINGERS WITH BEND RADIUS CONTROL CAN BE ASSEMBLED TO CABLE MANAGEMENT TYPE RAILS BY CUSTOMER (NOT SHOWN) (2) FIXED FRONT EQUIPMENT RAILS B (2) REAR EQUIPMENT RAILS EITHER CABLE MANAGEMENT TYPE -ORVERTICAL PATCH TYPE SEE P/N REFERENCE TABLE ON SHEET 2 FOR CABINET CONFIGURATIONS (12) CABLE OPENINGS (33mm X 120mm) WITH BEZELS AND COVERS COMPATIBLE W/ COOL BOOT P/N: CTGN1X5 (2) POU BRACKETS TOP VIEW FRONT DOOR, REAR DOOR, AND SIDE PANELS NOT SHOWN TITLE NET-ACCESS S TYPE CABINET 600mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305QX/00.PRT DATASET FILE NAME 12V305QX_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-27-12 TKW JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305QX-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-27-12 CHK 12V305QX-DC SIZE SCALE JDW NONE 1 SHT 4 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 598 23.5 FRAME WIDTH 2X 457 18.0 LEVELING LEGS 172 6.8 FLOOR MOUNT 20 B B .8 1044 1003 41.1 FRAME LENGTH 699 39.5 27.5 LEVELING LEG FLOOR MOUNT 4X 14 DIA .6 FLOOR MOUNTING HOLE LOCATIONSSOME PARTS REMOVED FOR CLARITY 2X 71 2.8 2X 191 7.5 2X 216 8.5 REAR OF CABINET BOTTOM VIEW TITLE NET-ACCESS S TYPE CABINET 600mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305QX/00.PRT DATASET FILE NAME 12V305QX_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-27-12 TKW JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305QX-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-27-12 CHK 12V305QX-DC SIZE SCALE JDW NONE 1 SHT 5 OF 5 A