Data Sheet AH231C_W Part Number : SPHWHTA2N300 Introduction Part Number : SPHWHTA2N300 Automotive DRL(Daytime Running Lighting) Source Features Package : Silicone covered ceramic substrate Dimension : 2.3 mm x 2.3 mm Luminous Flux : 280 lm @ 1,000 mA Color Coordinate Group : Appropriate to ECE Chip Configuration : 1 chip Viewing Angle: 120˚ ESD Voltage : Up to 8 kV acc. to ISO 10605-contact Applications Fog lamp DRL lamp Motorcycle Headlamp Interior and exterior automotive lighting 2016/04/05/Rev.00 - 1 - Table of Contents Product Overview ------------------------ 3 Part Number Description ------------------------ 3 Characteristic ------------------------ 4 Typical Characteristic ------------------------ 4 Luminous Flux Bin ------------------------ 4 Forward Voltage Bin ------------------------ 4 Color Bin Definition ------------------------ 5 Absolute Maximum Rating ------------------------ 6 Typical Characteristic Graph ------------------------ 7 Mechanical Dimension ------------------------ 11 Soldering Information ------------------------ 12 Packing Information ------------------------ 13 Product Labeling Information ------------------------ 15 Reliability Test Condition ------------------------ 16 Precaution ------------------------ 17 Revision History ------------------------ 19 Company Information ------------------------ 19 2016/04/05/Rev.00 - 2 - Product Overview • Luminous Flux Part Number Color of Emission Luminous Flux Form Factor SPHWHTA2N300 WHITE 300 lm 1x1 • Chip Configuration (chip array circuit) Part Number Description The part number designation is explained as follows : SP H WH T A2 N 3 00 AB C DE F GH I J KL MN OP QR Where: AB - designates company name and Samsung LED PKG (SP for Samsung PKG) C - designates power variant (H for automotive high power) DE - designates color variant (WH for automotive white color) F - designates LED PKG version (T for Initial version) GH - designates product configuration and type (A2 for automotive 2323 PKG type) I - designates lens configuration (N for no lens) J - designates Max power (3 for 3 ±0.5W) KL - designates specific property (00 for default) MN - designates forward voltage property OP - designates CIE coordination property QR - designates luminous flux property 2016/04/05/Rev.00 - 3 - Characteristics • Characteristics [1] [TJ = 25℃] Parameter Luminous Flux (IF = 1,000 mA) Typ. Forward Voltage (IF = 1,000 mA) Typ. Viewing Angle Typ. Symbol Value Unit lm 300 lm VF (25℃) VF (85℃) 3.5 3.4 V φ 120 Deg. Reverse Current not designed for IR Thermal Resistance (Junction to Solder point) Typ. Max. Rth_J-S Radian Surface reverse operation (Elec.) A 3 5 K/W 1.16 mm2 • Luminous Flux Bin[2] Symbol ΦV Condition [1] [TJ = 25℃] Bin Code Min. Typ Max. Unit X1 280 - 300 lm 01 300 - 320 lm IF = 1,000 mA Forward Voltage Bin[2] Symbol VF Condition IF = 1,000 mA 2016/04/05/Rev.00 [1] [TJ = 25℃] Bin Code Min. Typ. Max. Unit N1 3.30 - 3.45 V P1 3.45 - 3.60 V Q1 3.60 - 3.75 V - 4 - •Color Bin Definition[3] Symbol Condition Cx, Cy IF=1,000 mA Bin Code R1 Cx 0.3186 0.3203 0.3349 Cy 0.3355 0.3484 0.3274 0.3404 0.3633 * Note [1] Measurement condition : LED(TJ) = Ambient temperature(TA), by applying pulse current for under 25 ms. [2] Luminous flux measuring equipment : CAS140CT ΦV and VF tolerances are ±10% and ±0.1 V, respectively. [3] Luminous flux measuring equipment : CAS140CT Chromaticity coordinates : Cx, Cy according to CIE 1931. Cx and Cy tolerances are ±0.01, respectively. R1 2016/04/05/Rev.00 - 5 - Absolute Maximum Ratings Parameter Symbol Value Unit Operating temperature range TOPR -40 ~ 125 ℃ Storage temperature range TSTG -40 ~ 125 ℃ Junction temperature TJ_Max. 150 ℃ Short Term Junction Temp. (100hrs) TJ_short 175 ℃ IF 1,500 mA IF 100 mA Maximum Forward current[4] (TJ : 25℃)[5] Minimum Forward current[4] (TJ : 25℃)[5] Maximum Peaked current mA [5] (TJ : 25℃) Reverse voltage VR (TJ : 25℃)[5] ESD Sensitivity(HBM)[6] - 1,500 mA for ≤ 10 ms Duty ratio ≥ 10 : 1 not designed for reverse operation ±8 mA V kV * Notes [4] Unpredictable performance may be resulted by driving the product at below Min. IF or above Max. IF. But there will be no damage to the product. [5] The measurement condition means that temperature dependence is excluded by applying pulse current for under 25 ms.. [6] It is included the device to protect the product from ESD. 2016/04/05/Rev.00 - 6 - Typical Characteristics Graph Typical Spectrum : IF = 1,000 mA, TJ = 25°C[7] Typical Color vs Angle : IF = 1,000 mA, TJ = 25°C[7] 2016/04/05/Rev.00 - 7 - Relative Luminous Flux & Forward Voltage vs Forward Current : TJ = 25°C[7] Chromaticity Coordinate Shift vs Forward Current : Reference point_IF = 1,000 mA, TJ = 25°C[7] 2016/04/05/Rev.00 - 8 - • Relative Luminous Flux & Forward Voltage vs Temperature : Reference point_25℃, IF = 1,000 mA Tb (℃) Tb (℃) Color Shift vs Temperature : Reference point_25℃, IF = 1,000 mA Tb (℃) 2016/04/05/Rev.00 - 9 - • Typical Radiant Pattern : IF = 1,000 mA, TJ = 25°C[7] • Max. Permissible Forward Current : IF = f (TB) Tb (℃) * Notes [7] The measurement condition means that temperature dependence is excluded by applying pulse current for under 25 ms. 2016/04/05/Rev.00 - 10 - Mechanical Dimension[8] 0.75 Cathode Cathode * Note [8] Unit : mm, Tolerance : ±0.10mm, Dot line : projection view • Electric Schematic Diagram Cathode Anode • Material Information LED Package = Silicone resin covered White GaN LED on AlN ceramic substrate Electrode PAD = Au Plated PAD This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2016/04/05/Rev.00 - 11 - Soldering Conditions Pad Configuration & Solder Pad Layout[9] Solder resist Solder paste stencil Bare copper pattern * Note [9] Unit : mm, Tolerance : ±0.10mm Reflow Soldering Condition (Pb Free) Reflow Frequency : 2 times max. Manual Soldering Condition Not more than 5 seconds @MAX300℃, under soldering iron.(one time only) 2016/04/05/Rev.00 - 12 - Packing Information • Taping[10] User feed direction → Cathode Anode * Note [10] Unit : mm, LED taping quantity : 4,000EA / Reel. Reel[11] [11] Unit : mm, Tolerance : ±0.20mm 2016/04/05/Rev.00 - 13 - Packing Box information Dimension of Transportation Box in mm Width Length Height 220 245 182 2016/04/05/Rev.00 - 14 - Product Labeling Information Label Information ABCDEF Bin Code Part Number Lot Number SPHWHTA2N300 ABCDEF XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 4 ,000 PCS IIIIIIIIIIIIIIIIIIIIIIIII 1. Bin Code AB : Forward Voltage(VF) Bin CD : Color Bin EF : Luminous Flux(ΦV) Bin 2. Lot No. ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 4,000 PCS ① : Production Site (S:SAMSUNG KOREA, G:TIANJIN CHINA) ② ④ : L (LED) : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) : Year (X:2013, Y:2014, Z:2015 ...) ⑤ : Month (1 ~ 9, A, B, C) ⑥ : Day (1 ~ 9, A, B ~ V) ③ ⑦⑧⑨ : SAMSUNG ELECTRONICS Product number (1 ~ 999) ⓐⓑⓒ : Reel Number (1 ~ 999) 2016/04/05/Rev.00 - 15 - Reliability Test Conditions For detailed Information please contact your SAMSUNG Sales partner 2016/04/05/Rev.00 - 16 - Precaution 1) Absolute maximum ratings are set to prevent LED products from breaking due to extreme stress (temperature, current, voltage, etc.). Usage conditions must never go above the ratings, nor any of two of the factors reach the rating level simultaneously. 2) Please avoid touch or pressure on resin molded part in the products. To handle the products directly, it is recommended to use non metallic tweezers. 3) Device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from SAMSUNG ELECTRONICS, they should be packed by a sealed container with nitrogen gas injected. 5) After bag is opened, device subjected to soldering, solder reflow, or other high temperature processes must be : a. Mounted within 672hours at an assembly line with a condition of no more than 30℃/60% RH, b. Stored at < 10% RH. 6) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 8) Prepare a ESD protective area by placing conductive mattress(106Ω) and ionizer to remove any static electricity. 2016/04/05/Rev.00 - 17 - 9) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully. 2016/04/05/Rev.00 - 18 - Revision History Date Revision History 2015.10.16 2016.04.05 Drawn Approved Initial Edition - Preliminary S.Y HONG S.E LIM Initial Edition S.Y HONG S.E LIM Company Information Copyright @1995-2016 Samsung Electronics Co.Ltd All rights reserved San #24 Nongseo-Dong, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711 Korea http://www.samsung.com Sales Contact : [email protected] 2016/04/05/Rev.00 Author - 19 -