Data Sheet - AH352B_W

Data Sheet
AH352B_W
Part Number : SPHWHTA3N500
SPHWHTA3N500
Introduction
Part Number : SPHWHTA3N500
Automotive Head Lamp Lighting Source
Features
 Package : Silicone covered ceramic Substrate
 Dimension : 3.5 mm x 3.5 mm
 Luminous Flux : 600lm @1000mA
 Color Coordinate Group : Appropriate to ECE
 Chip Configuration : 2 chip array (1X2)
 Viewing Angle: 120˚
 ESD Voltage : up to 8kV acc. to ISO10605-contact
Applications
 Automotive Head Lamp : Low/High Beam
 Fog lamp
 DRL lamp
 Motorcycle Head Lamp
Environmental Compliance
Samsung is compliant to the restrictions of hazardous substances in electronic
equipment, namely, the RoHS, ELV, ISO14001 and REACH directives.
Samsung will not intentionally supplement the restricted materials to the
headlamp LED product : Cd, Pb, Hg, PBBs, PBDEs and Cr6+
2015/12/27/Rev.00
- 1 -
SPHWHTA3N500
Table of Contents

Product Overview
-----------------------
3

Part Number Description
-----------------------
3

Characteristics
-----------------------
4
Typical Characteristic
-----------------------
4
Luminous Flux Bin
-----------------------
4
Forward Voltage Bin
-----------------------
4
Color Bin Definition
-----------------------
5

Absolute Maximum Rating
-----------------------
6

Typical Characteristic Graph
-----------------------
7

Mechanical Dimension
-----------------------
11

Soldering Condition
----------------------
12

Packing Information
----------------------- 13

Product Labeling Information
-----------------------
15

Reliability Test Condition
-----------------------
16

Precaution for Use
-----------------------
17

Revision History
-----------------------
19

Company Information
-----------------------
19
2015/12/27/Rev.00
- 2 -
SPHWHTA3N500
Product Overview
• Luminous Flux
Part
Number
Color of
Emission
SPHWHTA3N500
WHITE
Luminous Flux[lm]
600
Form Factor
1 x 2
• Chip Configuration (chip array circuit)
X : 2.30 mm
Y : 1.09 mm
Part Number Description
The part number designation is explained as follows:
SP H WH T A3 N 5 0 0
AB C DE F GH I J K L
Where:
AB
- designates company name and package (SP for Samsung Package)
C
- designates package details (H for high power package)
DE
- designates color (WH for white)
F
- designates version of product (T for first version)
GH
- designates type of package (A3 for Automotive 3535 type)
I
- designates lens configuration (N for no lens type)
J
- designates maximum power (5 for 6.5~7.5W)
K
- designates special internal code (0 for Automotive)
L
- designates CRI (0 for default)
2015/12/27/Rev.00
- 3 -
SPHWHTA3N500
Characteristics
• Typical Characteristics
[Tj = 25 ℃][1]
Parameter
Symbol
Value
Unit
Luminous Flux (IF = 1,000 mA)
lm
600
lm
Forward Voltage (IF = 1,000 mA)
VF
6.7
V
Viewing Angle
φ
120
Deg.
Reverse Current
IR
not designed for
reverse operation
mA
Thermal Resistance
Rth_J-S max.
4.0
K/W
(Junction to solder point)
Rth_J-S typ.
3.0
K/W
A
2.51
mm2
Radiant Surface
[Tj = 25 ℃][1]
• Luminous Flux Bin[2]
Symbol
ΦV
Condition
IF = 1,000 mA
Bin Code
Min.
Typ
Max.
Unit
B0
550
-
600
lm
C0
600
-
650
lm
D0
650
-
700
lm
 Forward Voltage Bin[2]
Symbol
Condition
VF
IF = 1,000 mA
[Tj = 25 ℃][1]
Bin Code
Min.
Typ.
Max.
V1
6.0
-
7.0
V2
7.0
-
8.0
Unit
V
* Notes
[1] Measurement condition : LED(Tj) = Ambient temperature(Ta), by applying pulse current for under
25 ms.
[2] Luminous flux measuring equipment : CAS140CT
ΦV and VF tolerances are ±10% and ±0.1 V, respectively.
2015/12/27/Rev.00
- 4 -
SPHWHTA3N500
• Color Bin Definition[3]
Symbol
Condition
Cx, Cy IF= 1000mA
Bin
Code
R1
[Tj = 25 ℃]
Cx
0.3186 0.3203 0.3349 0.3355 0.3484
Cy
0.3274 0.3404 0.3633
• Color Bin Definition
R1
* Notes
[3] Luminous flux measuring equipment : CAS140CT
Chromaticity coordinates : Cx, Cy according to CIE 1931. Cx and Cy tolerances are ±0.01,
respectively.
2015/12/27/Rev.00
- 5 -
SPHWHTA3N500
Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Operating temperature range
TOPR
-40 ~ +125
℃
Storage temperature range
TSTG
-40 ~ +125
℃
Junction temperature
TJ_Max
+150
℃
IF
1,500
mA
IF
50
mA
mA
1,500 mA for ≤ 10 ms
mA
Maximum Forward current [4]
(Ta : 25 ℃)[5]
Minimum Forward current[4]
(Ta : 25 ℃)[5]
Maximum Transient Peaked current
[6]
(Ta : 25 ℃)[5]
Reverse voltage
(Ta
VR
[5]
: 25 ℃)
ESD Sensitivity[7]
-
not designed for
reverse operation
V
±8 KV HBM
* Notes
[4] Unpredictable performance may be resulted by driving the product at below Min. IF or above Max.
IF. But there will be no damage to the product.
[5] The measurement condition means that temperature dependence is excluded by applying pulse
current for under 25 ms.
[6] Duty 1/10 pulse with 10 ms.
[7] It is included the device to protect the product from ESD.
2015/12/27/Rev.00
- 6 -
SPHWHTA3N500
Typical Characteristics Graph
 Typical Spectrum
[ IF = 1,000 mA, Ts = 25 °C ][8]
1.0
0.8
0.6
0.4
0.2
0.0
380
430
480
530
580
630
680
730
780
• Typical Chromaticity Coordinate Shift vs Forward Current
[ IF = 1,000 mA, Ts = 25 °C ][8]
Chromaticity Coordinates Shift vs. Forward Current
0.03
ΔCx
0.02
ΔCy
0.01
0.00
-0.01
-0.02
-0.03
0
100 200 300 400 500 600 700 800 9001,000
1,100
1,200
1,300
1,400
1,500
*Notes
[8] The measurement condition means that temperature dependence is excluded by applying pulse
current for under 25 ms.
2015/12/27/Rev.00
- 7 -
SPHWHTA3N500
 Typical Relative Luminous Flux & Forward Voltage vs Forward Current
[ IF = 1,000 mA, Ts = 25 °C ][9]
Relative Luminous Flux vs. Forward Current
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
8
200
400
600
800 1,000 1,200 1,400 1,600
Forward Voltage vs. Forward Current
7
6
5
4
0
2015/12/27/Rev.00
200
400
600
800 1,000 1,200 1,400 1,600
- 8 -
SPHWHTA3N500
• Typical Relative Luminous Flux & Forward Voltage vs Temperature[9]
9
1.4
8
1.2
1.0
7
0.8
6
0.6
0.4
-40 -20 0
5
-40 -20 0
20 40 60 80 100 120
20 40 60 80 100 120
Tb (℃)
Tb (℃)
 Typical Chromaticity Coordinate Shift vs Temperature
[ IF = 1,000 mA, Ts = 25 °C ][9]
0.03
ΔCx
0.02
ΔCy
0.01
0.00
-0.01
-0.02
-0.03
-40-30-20-10 0
10 20 30 40 50 60 70 80 90 100110120
Tb (℃)
* Notes
[9] The measurement condition means that temperature dependence is excluded by applying pulse
current for under 25 ms.
2015/12/27/Rev.00
- 9 -
SPHWHTA3N500
• Typical Radiant Pattern
Relative luminous flux
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90
• Max. Permissible Forward Current[10]
Tb (℃)
* Notes
[10] The measurement condition means that temperature dependence is excluded by applying pulse
current for under 25 ms.
2015/12/27/Rev.00
- 10 -
SPHWHTA3N500
 Mechanical Dimension[11]
Unit[mm]
Anode
Anode
Cathode
Cathode
• Electric Schematic Diagram
• Material Information
LED Package = Silicone resin covered White GaN LED on AlN ceramic substrate
Electrode PAD = Au Plated PAD
This LED has built-in ESD protection device(s) connected in parallel to LED
Chip(s).
* Notes
[11] Tolerance unless otherwise specified is ± 0.1 mm.
2015/12/27/Rev.00
- 11 -
SPHWHTA3N500
Soldering Conditions
• Pad Configuration & Solder Pad Layout
Unit[mm]
Solder resist
Solder paste stencil
Bare copper pattern
 Reflow Soldering Condition (Pb Free)
Reflow Frequency : 2 times max.
Recommended Solder Pad Layout
 Manual Soldering Condition
Not more than 5 seconds @MAX300℃, under soldering iron.(one time only)
2015/12/27/Rev.00
- 12 -
SPHWHTA3N500
Packing Information
 Taping [12]
Unit[mm]
* Note
[12] Unit : mm, LED taping quantity : 1,000EA / Reel.
 Reel
V1SOX4
SPHWHTA3N500 V1S0X4
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
SLAW94001 / 1001 / 1,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[Unit : mm]
A
180.0
B
-3.0
2015/12/27/Rev.00
60.0
C
+1.0
13.0
W1
±0.3
- 13 -
13.0
±0.5
W2
15.4
±1.0
SPHWHTA3N500
 Packing Process
Dimension of Transportation Box in mm
Width
Length
Height
350
350
350
2015/12/27/Rev.00
- 14 -
Remark
SPHWHTA3N500
Product Labeling Information
A B C DE F
V1R1B0
SPHWHTA3N500
Bin Code
V1R1B0
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Part No.
SLAW94001 / 1001 / 1,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Lot No.
1. Bin Code
AB : Forward Voltage(VF) Bin
CD : Chromaticity Coordinate Bin
EF : Luminous Flux Bin
2. Lot No.
①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS
①
: Production Site (S:SAMSUNG KOREA, G:TIANJIN CHINA)
②
: L (LED)
③
: Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample)
④
: Year (X:2013, Y:2014, Z:2015...)
⑤
: Month (1 ~ 9, A, B)
⑥
: Day (1 ~ 9, A, B ~ V)
⑦⑧⑨
: SAMSUNG ELECTRONICS Product number (1 ~ 999)
ⓐⓑⓒ
: Reel Number (1 ~ 999)
2015/12/27/Rev.00
- 15 -
SPHWHTA3N500
Reliability Test Conditions
For detailed Information please contact your
SAMSUNG Sales partner
2015/12/27/Rev.00
- 16 -
SPHWHTA3N500
Precaution
1) Absolute maximum ratings are set to prevent LED products from breaking due
to extreme stress (temperature, current, voltage, etc.). Usage conditions must
never go above the ratings, nor any of two of the factors reach the rating level
simultaneously.
2) Please avoid touch or pressure on resin molded part in the products. To handle
the products directly, it is recommended to use non metallic tweezers.
3) Device should not be used in any type of fluid such as water, oil,
organic solvent, etc. When washing is required, IPA is recommended to use.
4) LEDs must be stored in a clean environment. If the LEDs are to be stored
for 3 months or more after being shipped from SAMSUNG ELECTRONICS,
they should be packed by a sealed container with nitrogen gas injected.
5) After bag is opened, device subjected to soldering, solder reflow, or other high
temperature processes must be :
a. Mounted within 672hours at an assembly line with a condition of no more
than 30℃/60% RH,
b. Stored at < 10% RH.
6) Repack unused products with anti-moisture packing, fold to close any
opening and then store in a dry place.
7) The LEDs are sensitive to the static electricity and surge. It is recommended to
use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage
exceeding the absolute maximum rating is applied to LEDs, it may cause
damage or even destruction to LED devices. Damaged LEDs may show some
unusual characteristics such as increase in leak current, lowered turn-on voltage,
or abnormal lighting of LEDs at low current.
8) Prepare a ESD protective area by placing conductive mattress(106Ω) and ionizer
to remove any static electricity.
2015/12/27/Rev.00
- 17 -
SPHWHTA3N500
Revision History
Date
Revision History
2015.12.27
Initial Edition
Author
Drawn
Approved
Y.J. Yoon
I.H. Lee
Company Information
US Samsung Semiconductor Inc.,
3655 N. First Street, San Jose CA 95134, USA
TEL. +1-408-544-4000
Europe
Samsung Electronics Germany GmbH, Samsung House,
Am Kronberger Hang 6, Schwalbach/Ts,Germany
TEL. +49-6196-66-0
Japan
Copyright @1995-2016 All rights reserved
Samsung Electronics
San #24, Nongseo-Dong, Giheung-Gu,
Yongin-City, Gyeongii-Do 446-711 Korea
http://www.samsung.com/sec/business/#
Sales Contact : [email protected]
2015/12/27/Rev.00
Samsung Japan Corporation SLED Team 10F, Shinagawa
Grand Central Tower 2-16-4, Kounan, Minato-ku, Tokyo
108-8240, Japan
TEL. +81-3-6369-6327
China (Tianjin Office in China)
Tianjin Samsung LED Co., LTD.
Weisi (6th) Rd., Micro-Electronics Industrial Park, Xiqing
District, Tianjin 300385, China
TEL. +86-755-8608-5550
- 18 -
Similar pages