CPCC, CPCF High Volume www.vishay.com Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Vertical Mount FEATURES • Space saving • Direct mounting on printed circuit board • High power to size ratio • Special cement potting compound and ceramic case provide high thermal conductivity in a fireproof package • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER RATING P40 °C W RESISTANCE RANGE RESISTANCE RANGE WIREWOUND METAL OXIDE TOLERANCE ±% WEIGHT (typical) g CPCC02 2 0.1 to 100 n/a 5, 10 4.7 CPCF02 2 NA 101 to 50K 5, 10 4.7 CPCC03 3 0.1 to 100 n/a 5, 10 5.5 CPCF03 3 NA 101 to 50K 5, 10 5.5 CPCC05 5 0.1 to 100 n/a 5, 10 6.9 CPCF05 5 NA 101 to 50K 5, 10 6.9 CPCC07 7 0.1 to 100 n/a 5, 10 9.2 CPCF07 7 NA 101 to 50K 5, 10 9.2 CPCC10 10 0.1 to 100 n/a 5, 10 14.3 CPCC1A 10 0.1 to 100 n/a 5, 10 13.2 TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature Coefficient CPCC, CPCF HIGH VOLUME RESISTOR CHARACTERISTICS ppm/°C ± 400 Short Time Overload - 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C -65 to +275 for wirewound, -65 to +225 for metal oxide Terminal Strength lb 10 minimum VAC 1000 Dielectric Withstanding Voltage GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CPCC0515R00JE66 C P C C 0 5 1 5 R 0 0 J E 6 6 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical Specifications Global Model column for options) R = decimal K = thousand R1500 = 0.15 1K500 = 1500 J = ± 5.0 % K = ± 10.0 % E66 = lead (Pb)-free bulk pack (Dash number) (up to 3 digits) From 1 to 999 as applicable Revision: 02-Oct-15 Document Number: 30116 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPCC, CPCF High Volume www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] DIMENSIONS in inches [millimeters] GLOBAL MODEL H W L LD CC ± 0.060 ± 0.040 ± 0.040 ± 0.002 + 0.08 / - 0.04 [1.5] [1.0] [1.0] [0.05] [+ 2 / - 1] CPCC02 0.787 [20] 0.433 [11] 0.138 [3.5] 0.031 [0.8] 0.197 [5] CPCF02 0.787 [20] 0.433 [11] 0.138 [3.5] 0.031 [0.8] 0.197 [5] CPCC03 0.984 [25] 0.472 [12] 0.315 [8] 0.031 [0.8] 0.197 [5] CC CPCF03 0.984 [25] 0.472 [12] 0.315 [8] 0.031 [0.8] 0.197 [5] W CPCC05 0.984 [25] 0.512 [13] 0.354 [9] 0.031 [0.8] 0.197 [5] CPCF05 0.984 [25] 0.512 [13] 0.354 [9] 0.031 [0.8] 0.197 [5] CPCC07 1.535 [39] 0.512 [13] 0.354 [9] 0.031 [0.8] 0.197 [5] MATERIAL SPECIFICATIONS CPCF07 1.535 [39] 0.512 [13] 0.354 [9] 0.031 [0.8] 0.197 [5] Part Marking: Dale, model, wattage, value, tolerance, date code CPCC10 1.378 [35] 0.630 [16] 0.472 [12] 0.031 [0.8] 0.295 [7.5] CPCC1A 2.008 [51] 0.512 [13] 0.394 [10] 0.029 [0.75] 0.197 [5] 0.138 ± 0.040 [3.5 ± 1] LD L CPCC Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value DEARATING Core: alumina ceramic Body: steatite ceramic case with cement potting compound End Caps: tin plated steel Terminals: tinned copper CPCF Element: nickel oxide RATED POWER IN % H 120 100 80 60 Wirewound 40 Metal Oxide 20 Core: alumina ceramic Body: steatite ceramic case with inorganic potting compound 0 - 65 - 25 25 75 125 175 225 275 40 AMBIENT TEMPERATURE IN °C End Caps: brass alloy Terminals: tinned copper PERFORMANCE TEST CONDITIONS OF TEST CPCC, CPCF TEST LIMITS Thermal Shock -55 °C to +275 °C (+225 °C for metal oxide), 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS for 1 min Low Temperature Operation -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 ) R ± (10.0 % + 0.05 ) R Load Life 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” Terminal Strength 5 s to 10 s 10 pound pull test ± (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder up to body ± (4.0 % + 0.05 ) R Revision: 02-Oct-15 Document Number: 30116 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000