Data Sheet AM321A_W Part Number : SPMWHT3235A3 SPMWHT3235A3 Introduction Part Number : SPMWHT3235A3 Compact Power Lighting Source Features Package: Au plated 2 pad design package with silicone resin View Angle : 120˚ Typical color temperature : 5500K Optical efficiency : 55 lm/W Precondition : JEDEC Level 2a ESD Withstanding Voltage : up to ±2kV [HBM] Reliability Test : AEC Q-101 qualified Applications traffic lights back lighting (LCD, switches, keys, displays, illuminated advertising) interior and exterior automotive lighting (e.g. dashboard back lighting and brake lights) substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire Environmental Compliance Samsung is compliant to the restrictions of hazardous substances in electronic equipment, namely, the RoHS, ELV, ISO14001 and REACH directives. Samsung will not intentionally supplement the restricted materials to the LED product: Cd,Pb,Hg,PBBs,PBDEs and Cr6+ 2015/08/03/Rev.05 - 1 - SPMWHT3235A3 Table of Contents Part Number Description ------------------------ 3 Characteristic ------------------------ 4 Typical Characteristic ------------------------ 4 Luminous intensity Bin ------------------------ 4 Forward Voltage Bin ------------------------ 4 Color Bin Definition ------------------------ 5 Absolute Maximum Rating ------------------------ 6 Typical Characteristic Graph ------------------------ 7 Mechanical Dimension ------------------------ 11 Soldering Information ------------------------ 12 Packing Information ------------------------ 13 Product Labeling Information ------------------------ 15 Reliability Test Condition ------------------------ 16 Precaution for Use ------------------------ 17 Revision History ------------------------ 19 Company Information ------------------------ 19 2015/08/03/Rev.05 - 2 - SPMWHT3235A3 Part Number Description The Part number designation is explained as follows : SP M WH T 321 5 A 3 AB CD EF AB C DE F GHI J K L MN OP QR Where: AB - designates company name and Samsung LED PKG (SP for Samsung LED PKG) C - designates power variant (M or automotive Middle Power) DE - designates color variant (WH for automotive White and single color) F - designates LED PKG version (value T for initial version) GHI - designates product configuration and type J - designates operating condition (value 5 for 50mA) K - designates specific property L - designates CRI variant (value 3 for CRI Min. 70) MN - designates forward voltage property OP - designates CIE coordination property QR - designates luminous intensity property 2015/08/03/Rev.05 - 3 - SPMWHT3235A3 Characteristics Typical Characteristics [1] [Tj =25℃] Parameter Symbol Value Unit Luminous Flux (I F = 50mA) ΦV 10.5 lm Forward Voltage (I F = 50mA) VF 3.1 V Viewing Angle φ 120 Deg. R th_JS 70 K/W Thermal Resistance (Junction to solder point) Luminous Intensity Bin[2] Symbol I V, Φ V Condition I F = 50mA [1] [Tj =25℃] Luminous Intensity Luminous Flux[3] I V [cd] Φ V [lm] Bin Code Min. Max. Min. Max. A1 2.0 3.0 6.0 9.0 A2 3.0 4.0 9.0 12.0 A3 4.0 5.0 12.0 15.0 [1] • Forward Voltage Bin[3] Symbol VF Condition I F = 50mA [Tj =25℃] Bin Code Min. Typ. Max. C1 2.7 - 3.0 C2 3.0 - 3.3 C3 3.3 - 3.6 Unit V * Note [1] Measurement condition : LED(T J ) = Ambient temperature(T A ), by applying pulse current for under 25 ms. [2] Luminous intensity measuring equipment : CAS140CT I V and V F tolerances are ±10% and ±0.1 V, respectively. [3] Luminous flux value is just reference purposes. LED are sorted by the value of luminous intensity. 2015/08/03/Rev.05 - 4 - SPMWHT3235A3 • Color Bin Definition[4] Symbol Cx, Cy Condition I F = 50mA Bin Code Cx Cy MZ 0.3115 0.3205 0.3197 0.3100 0.2837 0.2956 0.3131 0.2990 M1 0.3197 0.3288 0.3288 0.3205 0.3131 0.3282 0.3081 0.2956 M2 0.3288 0.3288 0.3386 0.3386 0.3081 0.3282 0.3426 0.3235 M3 0.3386 0.3386 0.3484 0.3484 0.3235 0.3426 0.3571 0.3388 M4 0.3484 0.3484 0.3582 0.3582 0.3388 0.3571 0.3715 0.3542 * Note [4] Chromaticity coordinates : Cx, Cy according to CIE 1931. Cx and Cy tolerances are ±0.01, respectively. 2015/08/03/Rev.05 - 5 - SPMWHT3235A3 Absolute Maximum Ratings Parameter Symbol Value Unit Operating temperature range T opr -40 ~ 110 ℃ Storage temperature range T stg -40 ~ 110 ℃ Junction temperature T jmax 125 ℃ IF 70 mA IF 10 mA I FM 100 mA VR 5 V R thJ-S 70 K/W P tot 260 ㎽ - ±2 kV Maximum forward current[5] (T j : 25 ℃)[6] Minimum forward current[5] (T j : 25 ℃)[6] Maximum peaked current (T j : 25 ℃)[6] Reverse voltage (T j : 25 ℃)[6] Thermal resistance (Junction to soldering point) Power consumption (T j : 25 ℃)[6] ESD Sensitivity (HBM) * Notes [5] Unpredictable performance may be resulted by driving the product at below Min. I F or above Max. IF. [6] The measurement condition means that temperature dependence is excluded by applying pulse current for under 25 ms. 2015/08/03/Rev.05 - 6 - SPMWHT3235A3 Typical Characteristics Graph Typical Spectrum : I F = 50mA, T = 25°C[6] j Typical Color vs Angle : I F = 50mA, T = 25°C[6] j 2015/08/03/Rev.05 - 7 - SPMWHT3235A3 Relative Luminous Intensity & Forward Voltage vs Forward Current : T = 25°C[6] j Chromaticity Coordinate Shift vs Forward Current : Reference point_I F = 50 mA, T = 25°C[6] j 2015/08/03/Rev.05 - 8 - SPMWHT3235A3 Relative Luminous Intensity & Forward Voltage vs Temperature : Reference point_25℃, I F = 50mA Chromaticity Coordinate Shift vs Temperature : Reference point_25℃, I F = 50Ma 2015/08/03/Rev.05 - 9 - SPMWHT3235A3 Typical Radiant Pattern : I F = 50mA, T = 25°C j Max. Permissible Forward Current : I F = f (T c ) 2015/08/03/Rev.05 - 10 - SPMWHT3235A3 Mechanical Dimension[7] ② Cathode mark ① [Side View] [Top View] [Bottom View] * Note [7] Unit : mm, Tolerance : ±0.10mm Do not place pressure on the encapsulating resin (hatch area) The maximum compressing force is 15N on the polymer • Electric Schematic Diagram ② ① 2015/08/03/Rev.05 - 11 - SPMWHT3235A3 Soldering Conditions Pad Configuration & Solder Pad Layout[8] * Note [8] Unit : mm, Tolerance : ±0.10mm Reflow Soldering Condition (Pb Free) Reflow Frequency : 2 times max. Manual Soldering Condition Not more than 5 seconds @MAX300℃, under soldering iron.(one time only) 2015/08/03/Rev.05 - 12 - SPMWHT3235A3 Packing Information Taping[9] A B 4.0 ±0.10 4.0 ±1.0 C 2.0 ± D 0.05 1.75 ± E 0.10 5.5 ± F 12.0 ± 0.05 G 0.10 3.2 ± H 3.83 ± 0.10 I 0.10 0.23 ± J 2.17 ± 0.02 * Note [9] Unit : mm, Cumulative tolerance/10 pitches to be ±0.2mm LED taping quantity : 2,000EA / Reel. Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10˚ angle to be the carrier tape. Reel[10] A 180.0 B -3.0 60 ±1.0 C 13.0 W1 ± 0.3 [10] Unit : mm 2015/08/03/Rev.05 - 13 - 13.0 ± 0.5 W2 15.4 ± 1.0 0.10 SPMWHT3235A3 • Packing Box information Dimension of Transportation Box in mm Width Length Height Reels/box 245 220 182 Up to 10 Reels 245 220 86 Up to 5 Reels 2015/08/03/Rev.05 - 14 - SPMWHT3235A3 Product Labeling Information Label Information ABCDEF SPMWHT3215A3 ABCDEF XXXX Bin Code Part Number Lot Number IIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS IIIIIIIIIIIIIIIIIIIIIIIII 1. Bin Code AB : Forward Voltage(V F ) Bin CD : Chromaticity Coordinate Bin EF : Luminous Flux(Φ V ) Bin 2. Lot No. ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 2,000 PCS ① : Production Site (S:SAMSUNG KOREA, G:TIANJIN CHINA) ② ④ : L (LED) : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) : Year (X:2013, Y:2014, Z:2015 ...) ⑤ : Month (1 ~ 9, A, B, C) ⑥ : Day (1 ~ 9, A, B ~ V) ③ ⑦⑧⑨ : SAMSUNG ELECTRONICS Product number (1 ~ 999) ⓐⓑⓒ : Reel Number (1 ~ 999) 2015/08/03/Rev.05 - 15 - SPMWHT3235A3 Reliability Test Conditions For detailed Information please contact your SAMSUNG Sales partner 2015/08/03/Rev.05 - 16 - SPMWHT3235A3 Precaution for Use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from SAMSUNG, they should be packed by a sealed container with nitrogen gas injected. (Shelf life of sealed bags: 12 months, temp. 0~40℃, 20~70% RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 12 months at an assembly line with a condition of no more than 30℃/60%RH, b. Stored at <10% RH 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃. 8) Devices must be baked for 1day at 65±5℃, if baking is required. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 2015/08/03/Rev.05 - 17 - SPMWHT3235A3 10) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully. 2015/08/03/Rev.05 - 18 - SPMWHT3235A3 Revision History Date Revision History 2010.12.31 Author Drawn Approved Initial Edition - Preliminary W.H Jung Y.H. Song 2012.10.08 Specification format change J.C. Kang S.H. Lee 2013.02.15 Precaution Revision J.C. Kang S.H. Lee 2013.10.10 Color Bin Definition addition J.C. Kang S.H. Lee 2014.01.28 Addition of box size J.C. Kang S.H. Lee 2015.08.03 Modify of Packing Information G.W. Park S.B. Kwak Company Information US - Samsung US, Inc. 10F, 6 Concourse Parkway, Atlanta,GA 30328, U.S.A TEL. +1-770-390-0325 FAX. +1-770-390-0326 Europe - Samsung Europe GmbH D-65824, Arcus Center 3F, Am Kronberger Hang 5, Schwalbach/TS, Germany TEL. +49-6196-66-6400, 6440 FAX. +49-6196-66-6429 Japan Roppongi T-Cube Building, 3-1-1, Roppongi, Minato-Ku, Tokyo 106-8532, Japan TEL. +81-3-6234-2190, FAX. +81-3-6234-2568 China (Shenzhen) Rm 4501, 45/F, New World Center, Yitian Road, Futian District, Shenzhen 518026, China TEL. +86-755-8608-5550 FAX. +86-755-8608-5566 Copyright @1995-2012 Samsung Electronics Co.Ltd China (Shanghai) All rights reserved San #24 Nongseo-Dong, Giheung-Gu, 25F, Shanghai International Trade Center, 2201 Yan-An Road(West), Shanghai 200336,China TEL. +86-21-3356-1177 FAX. +86-21-3356-1177 Yongin-City, Gyeonggi-Do 446-711 Korea www.samsung.com/sec Sales Contact : [email protected] 2015/08/03/Rev.05 Stheast Asia Samsung Hub #23-02, 3 Church Street, Singapore 049483, Singapore TEL. +65-6833-3217 FAX. +65-6833-3243~4 - 19 -