PZR www.vishay.com Vishay Sfernice 0 SMD Thin Film Chip Resistor (Strap) FEATURES SMD wraparound strap (0 ) Sizes available: 02016 to 2512 Thin film technology Terminations: Tin/silver or tin/lead Resistance value < 30 m Maximum current through resistor: 0.5 A to 6.3 A • Screening sequence under 0057 option • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • • • • • • More and more, customers use SMD straps (0 ) to able or disable a function on their PCB. Vishay Sfernice offers straps in a wide range of standard dimensions: From 02016 to 2512. Available Available Available Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE PZR02016 PZR0402 PZR0603 PZR0805 PZR1206 PZR2010 PZR2512 02016 0402 0603 0805 1206 2010 2512 RESISTANCE RANGE 0.02 0.02 0.02 0.02 0.025 0.025 0.025 RATED POWER W 0.02 0.04 0.08 0.15 0.25 0.8 1 MAXIMUM CURRENT A 0.5 1.4 2 2.7 3.2 5.7 6.3 CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Operating temperature range Substrate Technology -55 °C; +155 °C Storage temperature range Alumina Thin film SnPb or SnAg over nickel barrier over Au B type: SnPb for solder reflow over nickel barrier C type: SnPb one face N type: SnAg for solder reflow over nickel barrier F type: SnAg one face Film Terminations DIMENSIONS in millimeters One Face Termination PZR02016 to PZR2512 Side View L Wraparound Terminations PZR0402 to PZR2512 Active Face View Side View Bottom View L H D TERMINATIONS MODEL PZR02016 PZR0402 PZR0603 PZR0805 PZR1206 PZR2010 PZR2512 Revision: 19-Nov-14 One face W H W Wraparound L 0.48 (± 0.1) n/a 1 ± 0.152 1.52 ± 0.152 1.91 ± 0.152 3.06 ± 0.152 5.08 ± 0.152 6.35 ± 0.152 One face Wraparound W 0.39 (± 0.1) n/a 0.6 ± 0.127 0.85 ± 0.127 1.27 ± 0.127 1.6 ± 0.127 2.54 ± 0.127 3.3 ± 0.127 D One face Wraparound H 0.42 ± 0.07 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 One face n/a n/a n/a n/a n/a n/a Wraparound D n/a 0.25 ± 0.1 0.38 ± 0.13 0.38 ± 0.13 0.40 ± 0.13 0.48 ± 0.13 0.48 ± 0.13 Document Number: 53053 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PZR www.vishay.com Vishay Sfernice SUGGESTED LAND PATTERN in millimeters Gmin. Xmax. Zmax. TERMINATIONS MODEL One face Wraparound One face Zmax. Wraparound One face Gmin. 0.15 Wraparound Xmax. PZR02016 0.55 n/a PZR0402 1.15 1.55 0.15 0.73 PZR0603 1.67 2.37 0.35 0.98 PZR0805 2.06 2.76 0.74 1.40 PZR1206 3.21 3.91 1.85 1.73 PZR2010 5.23 5.93 3.71 2.67 PZR2512 6.5 7.20 4.91 3.32 Rated Power (%) POWER DERATING CURVE 80 60 20 0 20 40 60 70 80 100 120 140 155 Ambient Temperature in °C PACKAGING Antistatic packaging: Waffle pack or paper tape or low conductivity plastic tape. PZR02016 only available in plastic tape. MOQ WAFFLE PACK 2" × 2" 02016 n/a 0402 340 TAPE AND REEL MIN. TAPE WIDTH MAX. 100 0057 option (1): Screening sequence: • 100 %electrical control 5000 100 4000 1206 140 2010 60 2000 2512 50 2000 Revision: 19-Nov-14 Parts are packed: Active face down. • 100 % rapid change of temperature • 100 % visual inspection 0603 100 Tape and Reel Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered is between the MOQ and the maximum reel capacity, only one reel is provided. When several reels are needed for ordered quantity within MOQ and maximum reel capacity: Please consult Vishay Sfernice for specific ordering code. OPTIONS NUMBER OF PIECES PER PACKAGE 0805 0705 n/a Waffle Pack Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get “not stacked up” waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay Sfernice for specific ordering code. 40 SIZE 0.50 PACKAGING RULES 100 0 n/a 8 mm Note (1) Termination B tin/lead wraparound available only. Document Number: 53053 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PZR www.vishay.com Vishay Sfernice GLOBAL PART NUMBER INFORMATION Global Part Numbering: PZR02016-0R00FT P Z R GLOBAL MODEL PZR 0 2 0 1 6 - 0 R 0 0 F T 0 9 9 SIZE OHMIC VALUE TERMINATION (1) PACKAGING OPTION 02016 0402 0603 0805 1206 2010 2512 0 C = Tin/lead (one face) F = Tin/silver (one face) N = Tin/silver (wraparound) B = Tin/lead (wraparound) For more information see Codification of Packaging table From 1 to 3 digits, leave blank if no option Notes (1) PZR02016: one face termination only CODIFICATION OF PACKAGING CODE 18 PACKAGING WAFFLE PACK W 100 min., 1 mult WA 100 min., 100 mult (available only in size 1206) PLASTIC TAPE (Standard for all sizes, not available for 0402.) T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult TD 1000 min., 1000 mult TE 2500min., 2500 mult TF Full tape (quantity depending on size of chips) PAPER TAPE (Standard for 0402, available for 0603, 0805, and 1206 but not available for 02016. Please consult Vishay Sfernice for other sizes.) PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500min., 2500 mult PF Full tape (quantity depending on size of chips) Revision: 19-Nov-14 Document Number: 53053 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000