FRJ Datasheet

FRJ
www.vishay.com
Vishay Dale
Metal Film Resistors,
Zero Ohm Jumper, Industrial
FEATURES
• Provides low resistance circuit interconnections
• Color band marking for ease of identification
after mounting
• Flame retardant coating
• Compatible with automatic insertion equipment
• Tape and reel packaging
• Material categorization: 
For definitions of compliance please see
www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL 
MODEL
FRJ50
HISTORICAL
MODEL
FRJ-50
MAXIMUM RESISTANCE VALUE
m
10
MAXIMUM CURRENT A
AT + 25 °C
AT + 150 °C
25
0
Note
• DSCC has created a drawing to support the need for an axial-leaded zero-ohm jumper product. Vishay Dale is listed as a resource on this
drawing as follows:
DSCC
DRAWING
NUMBER
VISHAY DALE
MODEL
MAXIMUM RESISTANCE
m
MAXIMUM CURRENT RATING
A
A-A-55502
FRJ50
10
5
This drawing can be viewed at: http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg
TECHNICAL SPECIFICATIONS
PARAMETER
Insulation Resistance - Dry
Insulation Resistance - Wet
Category Temperature Range
UNIT
M
M
°C
VRMS
VRMS
10-9/h
g
- Atmospheric
- Reduced
Dielectric Strength
Failure Rate
Weight
FRJ50
10 000
100
- 55/+ 155
500
325
< 10
0.1
MATERIAL SPECIFICATIONS
Insulation Flammability
Self extinguishing 10 s after flame
is removed
Solder plated copper
Tin-plated copper or tin/lead plated copper
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FRJ50R36 (preferred part numbering format)
F
R
J
5
0
R
3
6
GLOBAL MODEL
PACKAGING
SPECIAL
FRJ50
E36 = Lead (Pb)-free, T/R (5000 pieces)
R36 = Tin/Lead, T/R (5000 pieces)
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 - 999
as applicable
Historical Part Number example: FRJ-50 R36 (will continue to be accepted)
FRJ-50
R36
HISTORICAL MODEL
PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
Revision: 24-Oct-12
Document Number: 31016
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FRJ
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
FRJ50
0.152 + 0.008 - 0.022
(3.86 + 0.20 - 0.56)
1.100 ± 0.118
(27.94 ± 3.00)
0.020 ± 0.002
(0.51 ± 0.05)
0.062 ± 0.010
(1.57 ± 0.25)
MARKING
Single Black
Color Band
PACKAGING
Taped Lead and Reel Package
(52.4 mm inside tape spacing per EIA-296-E)
Notes
• Quantity per reel: 5000 pieces in 5000-piece increments
• A minimum of 12.0" (305 mm) bare tape leader shall be provided at each end of the reel
• Paper separator protection between layers of components
• Reel arbor hole is 1.25" (31.75 mm)
Revision: 24-Oct-12
Document Number: 31016
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000