F-213-1 TW–08–09–F–T–250–100 TW–16–06–L–D–500–100 (2,00 mm) .0787" TW–20–03–T–Q–400–085 TM TW SERIES THROUGH-HOLE BOARD STACKERS SPECIFICATIONS For complete specifications see www.samtec.com?TW-TH Specify stacker height in (0,13 mm) .005" increments Mates with: CLT, SQT, SQW, ESQT, TLE, SMM, MMS, TCSD Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating: 3A per contact @ 80°C ambient Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold RoHS Compliant: Yes Lead–Free Solderable: Yes ALSO AVAILABLE Choice of one through six rows Paste In Hole (PIH) processing. Contact Samtec ASP Group. Note: For added mechanical stability, Samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. Contact [email protected] for more information. LEAD STYLE NO. PINS PER ROW TW PLATING OPTION –F Specify LEAD STYLE from chart below. 02 thru 50 Note: This Series is non-standard, non-returnable. (2,00 mm) .0787 pitch Also Available = Gold flash on post, Matte Tin on tail –L See 2SN Series. Surface Mount See previous page. (2,00) .0787 TYP No. of rows x (2,00) .0787 Low Profile Shrouded Double Row See ZLTMM Series. = Stacker Height in inches (0,13 mm) .005" increments –T, –5, –6 = Double Row –T LEAD STYLE –Q = Four Row –5 295 –6 * = Six Row (0,51) .020 SQ POST STACKER (1,27) HEIGHT See OAL .050 MIN Chart TAIL (2,00) .0787 (0,00) .000 MIN –S, –D*, –Q –T, –5, –6 WWW.SAMTEC.COM TAIL SPEC –“XXX” = Tail Length in inches (0,13 mm) .005" increments Example: -150 Example: –250 = (3,81 mm) = (6,35 mm) .150" .250" = Five Row –S, –D*, –Q See TMM Series. Note: Other Gold plating options available. Contact Samtec. 01 Right Angle –“XXX” = Matte Tin 04 See TMM Series. –S = Single Row = Triple Row –T 300 STACKER HEIGHT –D = 10µ" (0,25 µm) Gold on post, Matte Tin on tail 2 mm Shunt ROW OPTION * –01 –02 –03 –04 –05 –06 –07 –08 –09 –10 –11 –12 OAL (8,20) .323 (9,60) .377 (13,60) .535 –“XXX” = Polarized Position (Specify position to be removed) (14,10) .555 (15,10) .594 (17,10) .673 (19,10) .751 (21,10) .830 (11,60) .456 (15,60) .614 (10,08) .397 (28,19) 1.110 * Style –08 & –12 = S & D only ROW OPTION STACKER HEIGHT –S, –D*, & –Q –T, –5, –6 (3,05) .120 MIN (4,06) .160 MIN * –D with stacker height greater than (4,06mm) .160" will not have standoffs.