Quick Start Guide: AS5xxx UCB AS5xxx Universal Connector Board www.ams.com Revision 1.0 /26/Nov/12 page 1/3 Quick Start Guide AS5xxx UCB 1. Put the (A) Connectors (included in the NI8451 Kit) to the (B) PCB and screw on. 2. Use the (C) Jumper J1 to select 3.3 Volt or 5 Volt power supply. 3. Connect your adapter board to one of the fitting connectors regarding the labels. 2 (D) I C interface connectors (E) SPI interface connectors A B C D D D E E D B A www.ams.com Revision 1.0 11/26/2012 page 2/3 Quick Start Guide AS5xxx UCB 4. Connect the AS5xxx UCB to the NI8451-Box as shown below: For I2C-Interface OR SPI-Interface 5. Connect the NI8451-Box over USB to your PC. 6. Now the setup is ready for evaluation. To download evaluation sample software for LabVIEW go to: www.ams.com www.ams.com Revision 1.0 11/26/2012 page 3/3