Axial Lead Fuses 5×20 mm > Fast-Acting > 216SP Series 216SP Series, PS E 5x20 mm, Fast Acting Fuse Description 5x20mm fast acting ceramic body cartridge fuse Designed to IEC specification Features • Designed to International (IEC) Standards for use globally specification for Fast-Acting Fuses. • RoHS compliant and Pb-free • Meets the IEC 60127-2,Sheet 1 Applications Agency Approvals PS E Agency File Number Certificate No. Certificate No. Ampere Range Leaded NBK080205-E10480B NBK250702-E10480F 1A – 5A 6.3A – 10A CQC10012049970 1A – 10A Certificate No. SU05001-11001A SU05001-11002A Recognised File No. Guide No. E10480 JDYX2 Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 1A – 4A 30 minutes, Maximum 210% 5A – 6.3A 30 minutes, Maximum 8A – 10A 30 minutes, Maximum 1A – 4A 0.01 sec.., Min.; 2 sec. Max. 5A – 6.3A 0.01 sec.., Min.; 3 sec. Max. 1A – 2.5A 3.15A – 6.3A 275% 1A – 10A File No. Acc. Class No. 029862 LR1422-30 1A – 10A Licence. No. 40013834 1 – 6.3A 400% 1000% 1A – 10A 8A – 10A 0.04 sec., Min.; 20 sec. Max. 1A – 4A .003 sec., Min.; 0.3 sec. Max. 5A – 6.3A .003 sec., Min.; 0.3 sec. Max. 8A – 10A .01 sec.., Min.; 1.0 sec. Max. 1A – 4A .02 seconds, Maximum 5A – 6.3A .02 seconds, Maximum 8A – 10A .03 sec.onds, Maximum Electrical Characteristic Specifications by Item Amp Code Amp Voltage Interrupting Rating Rating Rating Nominal Resistance Cold Ohms (Ohms) Nominal Melting I2t (A2 sec) Maximum Maximum Power Voltage Drop at Dissipation at Rated Current Rated Current (mV) (W) Agency Approvals PS E 001 1 250 0.2370 0.18000 1000 2.5 x x x x x x x 01.6 1.6 250 0.1112 1.00500 600 4 x x x x x x x 002 2 250 0.0764 1.87000 500 4 x x x x x x x 02.5 2.5 250 0.0584 2.69500 400 4 x x x x x x x 3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x 004 4 250 0.0247 14.99500 300 4 x x x x x x x 005 5 250 0.0183 27.46000 250 4 x x x x x x x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x 008 8 250 0.0123 64.31500 200 4 x x x x x 010 10 250 0.0079 154.34000 200 4 x x x x x 1500 A @ 250 VAC I2t test at 10x rated current © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/216SP.html for current information. 1 Revised: January 19, 2012 216SP Series 216SP Series Agency Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Introduction to Circuit Protection Axial Lead Fuses 5×20 mm > Fast-Acting >Transientology 216SP Series 10000 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A Average Time Current Curves 1A Temperature Rerating Curve Time (seconds) 1000 100 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 Amps Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation 200 Preheat: 180 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 280° C Maximum Solder Dwell Time: 2-5 seconds 160 140 120 100 80 60 40 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. 216SP Series 2 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/216SP.html for current information. Axial Lead Fuses 5×20 mm > Fast-Acting > 216SP Series Product Characteristics Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202G, Method 211A, Test Condition A Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (5 cycles, –65ºC to +125ºC) Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Vibration MIL-STD-202G, Method 201A Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2: Agency approval marks Humidity MIL-STD-202G, Method 103B, Test Condition A (High RH (95%) and elevated temp (40ºC) for 240 hours) Salt Spray MIL-STD-202G, Method 101D, Test Condition B Dimensions Part Numbering System 0216 xxxx M X E SP P 20 ± 0.5 Series Current Rating Code 5.1 ± 0.6 Refer to Amp Code column of Electrical Characteristics Table 5.1 ± 0.6 * 8A and 10A have 0.8mm diameter Quantity Code All unit in mm. M = 1000 Packaging Code X = Filler Option Codes Single Pigtail Lead-free Packaging Packaging Option 216SP Series Bulk Packaging Specification Quantity Packaging Code Reel Size N/A 1000 MXE N/A © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/216SP.html for current information. 3 216SP Series 216SP Series Blank : Cartidge Type Fuse E : Axial Leaded Fuse