APD-128G064 Datasheet

APD-128G064
Vishay Dale
Plasma Display Modules
128 x 64 Graphics Display with
Drive Electronics and TTL Level Data Interface
FEATURES
•
TTL level video interface
•
Slim profile
•
Bright and vivid graphics
•
Low DC power consumption
•
> 50,000 hour MTBF
•
30:1 contrast ratio
•
Very affordable
The APD-128G064 DC plasma display offers viewing qualities designers seek such as high contrast, viewing angle of 150°C
minimum and excellent readability. Its bright (50 foot Lambert minimum) with characters and graphics figures presented in a
pleasing neon orange color against a black background. Plasma is much more readable and eye-pleasing than liquid crystal or
vacuum fluorescent displays and is filterable to red, amber or neutral density.
These plasma display panels are driven in a standard row-column refresh method much like a CRT display. The designer need
only supply TTL level signals for SERIAL DATA, DOT CLOCK, COLUMN LATCH, ROW DATA, ROW CLOCK and DISPLAY
ENABLE. The SERIAL DATA is entered with the DOT CLOCK up to frequencies as high as 8mHz. After a row of 128 pixels is
clocked in, the COLUMN LATCH signal is toggled and the data is latched. At the time the data is latched, the display is breifly
disabled using the DISPLAY ENABLE signal, then the row pointer is advanced with the ROW CLOCK signal. Once each frame
the ROW DATA must be asserted to synchronize the column serial data with the beginning row. The recommended scanning
frequency is approximately 70 Hz, but may be as high as 200 Hz. The high clock rate on the data clock allows for rapid refresh
and maximum access time to the refresh jam.
ELECTRICAL SPECIFICATIONS
OPTICAL SPECIFICATIONS
Voltage (s) Required: + 75 VDC, - 110 VDC, + 5 VDC, Vcc
+ 12 VDC. (12 VDC to be referenced to - 110 VDC)
Viewing Area: 5.108” [129.74mm] W x 2.548” [64.72mm] L.
Power Required: Typical = 2 watts. Maximum = 7 watts.
Character Array: 16 x 8 (using 8 x 8 block), 21 x 8 (using 6
x 8 block).
Character Size: 0.267” [6.78mm] H x 0.187” [4.75mm] W.
Pixel Size: 0.028” [.711mm] square.
Pixel Pitch: 0.040” [1.016mm].
Luminance: 50 foot lamberts.
STANDARD ELECTRICAL SPECIFICATIONS
DESCRIPTION
SYMBOL
MIN.
TYP.
MAX.
UNITS
Logic Supply
Vcc
+ 4.5
+ 5.0
+ 5.5
VDC
Anode Supply
Vsp
-
+ 75
+ 80
VDC
Cathode Supply
Vsn
-
- 110
- 125
VDC
Cathode Control**
Vrw
+ 10.8
+ 12.0
+ 15.0
VDC
Total + Vsp & - Vsn
Vtot
170
185
205
VDC
Logic 1 Input
Vih
2.0
-
-
VDC
Logic 0 Input
Vil
-
-
0.8
VDC
www.vishay.com
2
Document Number: 37008
Revision 05-Dec-00
APD-128G064
Vishay Dale
DIMENSIONS in inches [millimeters]
Mounting Holes .150 [3.81] Dia. 4 Places
.150
[3.81]
7.70 [195.58]
4.15
[105.41]
2.548
[64.72]
5.00
[127.0]
4.70
[119.38]
1.226
[31.14]
.150
[3.81]
.550
[13.97]
1.45
[36.83]
5.10 [129.54]
.425
[10.80]
6.90 [175.26]
8.00 [203.20]
128 x 64 Full Field
.395 [10.03] Max
.062 [1.575]
14.80
[375.92]
.895
[22.73]
P1
P2
ORDERING INFORMATION
DESCRIPTION
PART NUMBER
Display, Driver Electronics and TTL Interface ........................................................................................................................ APD-128G064
Data Connector Kit ....................................................................................................................................................................... 280105-05
Power Connector Kit ..................................................................................................................................................................... 280108-12
Document Number: 37008
Revision 05-Dec-00
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages