LCD-016N002T Datasheet

LCD-016N002T
www.vishay.com
Vishay
16 x 2 Character LCD
FEATURES
• Type: Character
• Display format: 16 x 2 characters
• Built-in controller: ST 7066 (or equivalent)
• Duty cycle: 1/16
• 5 x 8 dots includes cursor
• + 5 V power supply
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
ITEM
ABSOLUTE MAXIMUM RATINGS
STANDARD VALUE
UNIT
STANDARD VALUE
ITEM
SYMBOL
54.8 x 19.0
Power Supply
VDD to VSS
- 0.3
-
7.0
0.51 x 0.67
Input Voltage
VI
VSS
-
VDD
Module Dimension
65.4 x 28.2
Viewing Area
Dot Size
Dot Pitch
0.54 x 0.70
Mounting Hole
N/a
Character Size
2.67 x 5.57
mm
MIN.
TYP.
MAX.
UNIT
V
Note
• VSS = 0 V, VDD = 5.0 V
ELECTRICAL CHARACTERISTICS
ITEM
SYMBOL
CONDITION
Input Voltage
VDD
Supply Current
IDD
Recommended LC Driving
Voltage for Normal Temperature
Version Module
VDD to V0
LED Forward Voltage
LED Forward Current - Array
LED Forward Current - Edge
EL Power Supply Current
STANDARD VALUE
UNIT
MIN.
TYP.
MAX.
VDD = + 5 V
4.5
5.0
5.5
V
VDD = + 5 V
-
1.2
-
mA
- 20 °C
-
-
4.5
0 °C
-
-
-
25 °C
-
4.2
-
50 °C
-
-
-
70 °C
3.8
-
-
VF
25 °C
1.9
2.0
2.2
IF
25 °C
IEL
VEL = 110 VAC, 400 Hz
-
-
-
16
18
20
-
-
5.0
V
V
mA
mA
OPTIONS
PROCESS COLOR
BACKLIGHT
TN
STN
Gray
STN
Yellow
STN
Blue
FSTN
B&W
x
x
x
x
x
STN
Color
None
LED
EL
x
x
x
CCFL
For detailed information, please see the “Product Numbering System” document.
Revision: 05-Oct-12
Document Number: 37304
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-016N002T
www.vishay.com
Vishay
DISPLAY CHARACTER ADDRESS CODE
Display Position
1
00
40
DD RAM Address
DD RAM Address
2
01
41
3
02
42
4
03
43
5
04
44
6
05
45
7
06
46
8
07
47
9
08
48
10
09
49
11
0A
4A
12
0B
4B
13
0C
4C
14
0D
4D
15
0E
4E
16
0F
4F
INTERFACE PIN FUNCTION
SYMBOL
FUNCTION
1
VDD
Supply voltage for logic
2
VSS
Ground
PIN NO.
3
V0
Operation voltage for LCD
4
NC
No connection
5
NC
No connection
6
RS
H: Data/L: Instruction
7
R/W
H/L read/write data
8
E
Chip enable signal
9
DB0
Data bit 0
10
DB1
Data bit 1
11
DB2
Data bit 2
12
DB3
Data bit 3
13
DB4
Data bit 4
14
DB5
Data bit 5
15
DB6
Data bit 6
16
DB7
Data bit 7
17
A
LED +
18
K
LED -
DIMENSIONS in millimeters
3.2
6.64
19(VA)
12.12(AA)
63.0
5.3
54.8 (VA)
8.49
48.42 (AA)
4.5 Max.
19.5
2
17
(P1.0 x 17)
28 ± 0.5
2
1.2
26.6
65.4 ± 0.5
1.2
3.05
2.67
4.0
4.0
(Reinforceing layer)
29.0 ± 2.0
Revision: 05-Oct-12
0.54
0.51
6.55
5.57
0.70
0.60
19.0 ± 0.2
15 ± 1.0
Dot Size
Document Number: 37304
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000