Baumer electric Actuator-Sensor-Interface AS-Interface module ASIA 56A4023 Art.-Code: 147627 82 • Specification 2.11 41 44,5 mounting module base • Extended addressing mode as A/B-slave; up to 62 modules ø 4,4 (2x) 13,3 NC BUS 35 (DIN rail) 38 56 44 bus cable 6 • Four potential free inputs 24 VDC add. cable nut max. 75 • Address programming via jack NC • Profile S - 0.A.E • Spring loaded terminals (cage clamp) • Fault diagnosis LED‘s ø 16 ø 2,8 to 6,0 20 bus data voltage supply range supply current reverse polarity protection E/A configuration ID-code / ID-2 code AS-i voltage indicator / error indicator inputs potential free inputs cage clamps isolation voltage AS-i < > isolated inputs input current high / low input voltage high / low input indicator general protection class temperature range / storage temperature housing material specification power supply unit for external feed mounting EMC certificate no. 20 25,5 20 connection diagram 26,5 - 33,1 VDC ≤ 25 mA yes 0 HEX A HEX / E HEX green LED / red LED AS-i + yes, 24 VDC - ; IN 1...IN 4 2000 VDC ≥ 1,5 mA / ≤ 0,5 mA > 10 VDC / < 5 VDC yellow LED IP 65 (with EPDM cable) -25...+70 °C / -25...+85 °C PBT / PC (UL 94 V-0) according to PELV DIN rail / screws refer to the AS-i brochure 60403 AS-i AS-i - D0 . . . D3 + IN 1 + IN 2 + IN 3 + IN 4 general port assignment: D0, D1, D2, D3 input possible conductor cross-sections: sensor terminals: 0,08...2,5 mm2 max. outer cable diameter: ø 2,8...6 mm diagnosis ASI Error (green) (red) Status Description POWER OFF Address = 0 No data exchange No ASi power Address = 0 Watchdog activated, Address = 0 ok ok LED dark Baumer Electric AG Hummelstrasse 17 Postfach CH-8501 Frauenfeld Drawn: 22.04.04/sli Checked: 22.04.04/phw LED light LED flashing Technical specifications subject to change Tel. +41 52 728 11 22 Fax +41 52 728 11 44 Released: 22.04.04/phw Last change: 03.11.04/phw