MBR4045PT SWITCHMODE™ Power Rectifier Features and Benefits • • • • • • Low Forward Voltage Low Power Loss/High Efficiency High Surge Capacity 175°C Operating Junction Temperature 40 A Total (20 A Per Diode Leg) Pb−Free Package is Available* http://onsemi.com SCHOTTKY BARRIER RECTIFIER 40 AMPERES 45 VOLTS Applications • Power Supply − Output Rectification • Power Management • Instrumentation 1 2,4 3 Mechanical Characteristics • • • • • • Case: Epoxy, Molded Epoxy Meets UL 94, V−0 @ 0.125 in Weight: 1.9 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperatures for Soldering Purposes: 260°C Max. for 10 Seconds ESD Rating: Human Body Model 3B Machine Model C SOT−93 CASE 340D STYLE 2 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MARKING DIAGRAM AYWWG B4045 B4045 A Y WW G = Device Code = Assembly Location = Year = Work Week = Pb−Free Package ORDERING INFORMATION Device MBR4045PT MBR4045PTG Package Shipping† SOT−93 30 Units/Rail SOT−93 (Pb−Free) 30 Units/Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2006 August, 2006 − Rev. 7 1 Publication Order Number: MBR4045PT/D MBR4045PT MAXIMUM RATINGS Symbol Max Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 45 V Average Rectified Forward Current (Rated VR, TC = 125°C) Per Diode Per Device IF(AV) Peak Repetitive Forward Current, (Rated VR, Square Wave, 20 kHz @ TC = 90°C) Per Diode IFRM 40 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 400 A Peak Repetitive Reverse Current, (2.0 ms, 1.0 kHz) IRRM 2.0 A Storage Temperature Range Tstg −65 to +175 °C Operating Junction Temperature (Note 1) TJ −65 to +175 °C Peak Surge Junction Temperature (Forward Current Applied) TJ(pk) 175 °C Voltage Rate of Change dv/dt 10,000 V/ms A 20 40 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA. THERMAL CHARACTERISTICS Characteristic Conditions Symbol Max Maximum Thermal Resistance, Junction−to−Case Minimum Pad RqJC 1.4 Maximum Thermal Resistance, Junction−to−Ambient Minimum Pad RqJA 55 Unit °C/W ELECTRICAL CHARACTERISTICS Characteristic Symbol Instantaneous Forward Voltage (Note 2) (iF = 20 A, TJ = 25°C) (iF = 20 A, TJ = 125°C) (iF = 40 A, TJ = 25°C) (iF = 40 A, TJ = 125°C) VF Instantaneous Reverse Current (Note 2) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 125°C) iR http://onsemi.com 2 Min Typ Max − − − − 0.53 0.46 0.64 0.62 0.70 0.60 0.80 0.75 − − 0.09 30 1.0 50 Unit V mA MBR4045PT 100 100 I R, REVERSE CURRENT (mA) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) TYPICAL ELECTRICAL CHARACTERISTICS 10 TC = 150°C 1 TC = 100°C 100 TC = 25°C 200 300 400 500 600 700 vF, INSTANTANEOUS FORWARD VOLTAGE (mV) 800 TC = 150°C 10 TC = 100°C 1 0.1 0.01 TC = 25°C 0 C, CAPACITANCE (pF) 10000 1000 100 1 20 30 VR, REVERSE VOLTAGE (VOLTS) 40 50 Figure 2. Typical Reverse Current I F(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 1. Typical Forward Voltage 10 10 VR, REVERSE VOLTAGE (VOLTS) 100 30 25 20 15 SQUARE WAVE (VR = 45 V) 10 DC 5 0 100 Figure 3. Typical Capacitance Per Leg 110 120 130 140 TC, CASE TEMPERATURE (°C) 150 Figure 4. Current Derating Per Leg http://onsemi.com 3 160 MBR4045PT PACKAGE DIMENSIONS SOT−93 (TO−218) PLASTIC CASE 340D−02 ISSUE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. SCALE 1:1 C Q B U S E DIM A B C D E G H J K L Q S U V 4 A L 1 K 2 3 D MILLIMETERS MIN MAX −−− 20.35 14.70 15.20 4.70 4.90 1.10 1.30 1.17 1.37 5.40 5.55 2.00 3.00 0.50 0.78 31.00 REF −−− 16.20 4.00 4.10 17.80 18.20 4.00 REF 1.75 REF STYLE 2: PIN 1. 2. 3. 4. J H V G INCHES MIN MAX −−− 0.801 0.579 0.598 0.185 0.193 0.043 0.051 0.046 0.054 0.213 0.219 0.079 0.118 0.020 0.031 1.220 REF −−− 0.638 0.158 0.161 0.701 0.717 0.157 REF 0.069 ANODE CATHODE ANODE CATHODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBR4045PT/D